How To Trim A Window

Рет қаралды 65,749

Күн бұрын

In this video, I show how to trim a window. Window casing installation is a DIY project most homeowners can tackle. I show how to install window stool, window apron, and the trim in a easy step-by-step fashion. I demonstrate the install on an interior window. Enjoy!
My Favorite Tools And Supplies 👉 www.amazon.com/shop/theexcell...
Tools And Supplies Used In This Video👇
Router Bit amzn.to/3TSmPVa
Router amzn.to/3Vu2Pd1
Clamp Set amzn.to/3GrboAW
Finish Nails amzn.to/3hHs64s
Spackling amzn.to/3hAAX8c
Sanding Sponge amzn.to/3DWauJC
Oscillating Tool Heads amzn.to/3UzACRJ
Speed Square amzn.to/3J0cPoF
Chalk Box amzn.to/3p9ziYv
🔴 Subscribe to this DIY channel: kzfaq.info...
🔵 Subscribe to my personal finance channel: kzfaq.info...
🟡 Check out my Amazon store: www.amazon.com/shop/theexcell... . Here you will find tools and supplies used in my videos. (DISCLAIMER- I am an Amazon affiliate. I get a small commission that helps support the channel at no extra cost to you)
Timestamps
Intro 00:00
How to paint window trim 00:49
How to make the window stool 02:17
How To make the window apron 10:36
How to install the window casing 13:30
How to fill nail holes in trim 19:21
How to caulk window trim 20:32
Disclaimer: This video is all based on my personal opinion and is for entertainment purposes ONLY. I am not a financial advisor, CPA, attorney, tax advisor, electrician, plumber, housing contractor, designer, or any type of profession to give advice. I am just a consumer sharing my experiences and research. If you do need knowledge for those types of things, I will advise you to seek help for those professionals.

Пікірлер: 72

@fuegoman45 Жыл бұрын

Josh, you seriously make the best “how to” videos on KZfaq. I’ve always said you have the heart of a teacher. Thank you 🙏 You are very much appreciated 🤙

@TheExcellentLaborer Жыл бұрын

Hey Todd! I’m glad to see you watching another video. I really do appreciate your support with my channel! I’m thankful to be given this opportunity. Hope everything is going good with your projects. Take care!

@randallridgley7679 25 күн бұрын

I've never heard it called a stool; only known it as a sill. Anyway, excellent video! Best I've seen. 👍🏼

@davidharrison3074 Жыл бұрын

Trimming doors and windows have always been a favorite of mine. I actually have a biscuit machine made for trim that I have used to make up the frames with biscuits in the corners and let them set over night on jobs the just have to set them in place and pin them. Always making sure you number them in case different sizes were to be part of the job. Sills are always nice as well to only have to make up three pieces. But if it was a picture frame look, the biscuit system is great. Great job on the video and workmanship Josh. 👍🏻

@TheExcellentLaborer Жыл бұрын

That’s a great point about using a biscuit machine. I don’t earn one of those but I would definitely try that out. Sounds like you can’t go wrong with that method. What making model machine do you use? Thanks David for stopping by and watching!

@davidharrison3074 Жыл бұрын

@@TheExcellentLaborer actually there isn't a name on the unit. It's one that it set up with a foot switch my father in law put together, but works really well. The older things always last forever. 👍🏻

@ayubbuildingconsultants 7 ай бұрын

The best window trim installation video on KZfaq. Most of all very detailed. Most other videos I found were short and without any detail.

@greggclaussen Жыл бұрын

My four favorite channels on KZfaq, Yours, Vancouver Carpenter, Finish Carpentry TV and Grow in Faith Grow in Christ. You explain everything so well, I hope it pays off for you handsomely.

@garyw9707 2 ай бұрын

Josh, Thank you for the video. I learned so much from your detailed process.

@TheExcellentLaborer 2 ай бұрын

You are welcome! I’m glad I could help. Good luck with your project!

@iceman71625 4 ай бұрын

Ty brother.. easiest way I was ever taught 💪💪💪💪 and my boss has 30 yrs experience 😂😂😂 great video subscribed looking to learn more with your other videos as we are getting into the flipping business.. will add alot more to my portfolio 💪🙏💪🙏🏡🏡🙌🙌 ty

@jasonwardofficial Жыл бұрын

You seriously make the BEST videos. Great job planning, filming, editing, and all the rest of the background work to make these possible!

@TheExcellentLaborer Жыл бұрын

I try my best when I create videos. You are right when it comes to the unseen background work. I am thankful for subscribers like you that appreciate the content. Thank you for watching!

@carlyale Жыл бұрын

Your video is great and timely as I’ll be installing kitchen window stools, casing and trim next week at my daughter’s home.

@TheExcellentLaborer Жыл бұрын

That’s good to hear Carl ! I’m glad my videos are hopeful for you. Good luck with your trim project!

@bigg5361 Жыл бұрын

I try to be a do it yourselfer. I just ordered windows and this is going to help me a lot. Thanks 🙏

@TheExcellentLaborer Жыл бұрын

Congrats on your window order! I have been buying MI brand windows for the past few houses. They seem to be a pretty good bang for the buck. I hope your DIY projects are going well. Thank you for watching!

@shaffer4220 Жыл бұрын

Made a great video. You finished it off nicely. My compliments. I cannot believe the workmanship issues with framing (Gaps between trim and casing) also not filling nail holes. I guess thats track home contractor mentality.

@billysun1059 2 ай бұрын

nice guy! and great video!

@ShaneOsborne 3 ай бұрын

Nice !

@kristieandjeff2720 5 ай бұрын

Excellent detailed video, thank you so much for taking the time to share this with us 🛠️👍

@organogold8 Жыл бұрын

Wow you explained everything so well! Thank you 😊

@TheExcellentLaborer Жыл бұрын

I appreciate that! Stay tuned for more videos to come!

@kjantzen64 7 ай бұрын

Very helpful! Thank you! This saved my project. :)

@csimet 9 ай бұрын

Great video. My only suggestion... get a set of Fastcap Zero Clearance Tapes for the miter saw. They apply to the plastic insert (the yellow part on your saw's table/base) and once cut with the blade you will be using, provide an exact kerf location that makes getting your cuts dead on accurate. I think they can be had for $10 and you get a set of five. They are a huge time saver and even make the cuts cleaner with no blow out on the under side of the work piece.

@kelseyroberts6220 Жыл бұрын

Thank you for this video! I watched a few videos before yours but they threw out so many different measurement numbers it was confusing. This makes it seem easy and not too overwhelming!

@RayneWindowsandDoors 6 ай бұрын

Your tools are very amazing

@joewenzel5142 Жыл бұрын

Another excellent, in-depth video. Thanks. I don't have a high speed miter saw just the manual one with a manual saw that I definitely will be using when I need to replace trim. My dogs in their haste to get out the back door really scratched up a side trim on the door and now I have a better idea how to replace it.

@TheExcellentLaborer Жыл бұрын

Hi Joe! I have used the manual miter saws in the past. They definitely work, but after using an electric motor it is hard to go back to the arm powered version. Yes I will be doing a video on door trim in the future. Thanks for watching and stay tuned!

@joewenzel5142 Жыл бұрын

@@TheExcellentLaborer Great thanks. I don't blame you especially a professional carpenter like you it's a must have.

@willcortez2458 Жыл бұрын

Hey Josh, I love your videos! You're a great educator. Keep up the great work!

@TheExcellentLaborer Жыл бұрын

Thank you for the support Will! I will keep the camera rolling. Take care!

@spreadcreekjr1731 Жыл бұрын

Best videos on youtube

@bpowda84 Жыл бұрын

Dude reminds me of the Micro Machine Man talking so fast lol. Love the vids tho 👍🏼👍🏼

@TheExcellentLaborer Жыл бұрын

I do talk fast sometimes. Time is of the essence. Thanks for watching!

@ram-oy4xl 2 ай бұрын

Very very useful ❤, thank you so much

@lennygriffin4464 Жыл бұрын

Great job, very knowledgeable!!!

@TheExcellentLaborer Жыл бұрын

I appreciate that Lenny!

@1bottlefed Жыл бұрын

Great vid for anyone lucky enough to work behind a good framer and window installation. Sadly at least half the windows I trim the frames are usually up to 3/8ths proud or recessed along with the drywall being 3/4" from the window frames on one side or the other.

@210GrainsOfJustice Жыл бұрын

Always wanted to learn this thanks so much young man 👍🏻

@TheExcellentLaborer Жыл бұрын

Window trimming is not too bad you learn. I’m glad I could help. Thanks for watching!

@aaudain1 Жыл бұрын

Great idea 💡 👍

@TheExcellentLaborer Жыл бұрын

Thanks for the support Anthony!

@espencer83 Жыл бұрын

Great video

@TheExcellentLaborer Жыл бұрын

I appreciate that Eric!

@ckuiper7332 Жыл бұрын

I use a sliding carpenters speed square for the set back at 3/16" with the 2.5" colonial.. likes it slim, but 1/4 is very appropriate for the wider trim like you have there. That gets me the all the dimensions in one shot. The inside size of the 45° I have to carry with a speed square and cut, where outside sizing for cuts is much easier/ faster. Moreover I always use metric for cut sizing, it's much more accurate & cleaner. When fitting, I just slice back 1/2 blade width. Spackling us definitely the best for nail covers as it does not have the shrink caulk does,. Once n dunn! Nice video for the diy'rs

@TheExcellentLaborer Жыл бұрын

Oh yes a square of that nature would work great for marking the reveal. That’s a good tip! Thanks for sharing with everyone. Yes spackling is much better because it does not shrink like the caulking. I have used that in the past but you still see the nail holes using caulking. Thanks for watching!

@ruthanndaniel5050 8 ай бұрын

I love your video. That said, something my dad taught me was, when measuring you need to be precise...- I know you are measuring to specific length and marks - but you SAY "that's ABOUT xx" but we WANT it to be precise, dont we?? it sounds confusing when you say "About"

@raghuZanne 10 ай бұрын

I hammered the like button like you said and my phone's screen is broken now. Jk Thanks again for these videos! Quite useful for me

@trapped7534 Жыл бұрын

Great video. I am o l d but am surprised by the term “window stool”. Back in the day it was called a window sill.

@TheExcellentLaborer Жыл бұрын

Yes some people call it window sill as well. Either term is acceptable. Thanks a lot for your support. Take care!

@Charlie-fc1mh 2 ай бұрын

That does look great. Just wanted to ask you why would you use spackling instead of wood putty?

@ryanbiggs7083 Жыл бұрын

Nice vid, thanks for the tips, can you tell us how long these projects take you(start to finish one window trim) in your videos? Just curious how I need to budget my time for my project!

@ruibento9840 Жыл бұрын

I should learn how to do more things

@lucasbrotka2933 9 ай бұрын

Where did you get that trim from? Love it

@charlesviner1565 Жыл бұрын

👍

@TheExcellentLaborer Жыл бұрын

Thank you Charles!

@abdulwadud363 5 ай бұрын

Very good worker, love the country accent 😅

@mikem1436 Жыл бұрын

Do you ever caulk the outside edge of where the trim and the drywall meet so there is no visible crack?

@philhart3033 5 ай бұрын

Can I use 2” 18 gauge brad nails instead of finishing nails?

@EdTravelingEast Жыл бұрын

Bruh, you need to start advertising your own gear instead of giving Carhartt free advertising

@JoShUa_J78 Жыл бұрын

How are those Ridgid tool holding up? I can't decide on those or Makita

@TheExcellentLaborer Жыл бұрын

So far they have held up good. They tend you cost less than Makita. I hope that helps!

@obinna3037 Жыл бұрын

Josh, do you base in NJ?

@richardvg03 Жыл бұрын

Do you have a video like this but for the outside???

@michellelawrence1775 Жыл бұрын

Brad nailer vs a finish nailer for trim/base boards?

@TheExcellentLaborer Жыл бұрын

Either one will work but I like you use finish nailers because the nails are a little bigger for better holding power. Hope that helps!

@skyemac8 Жыл бұрын

@@TheExcellentLaborer thanks!

@peterrahill9263 18 күн бұрын

18:26

@dennisalvarez2518 17 күн бұрын

Your handsome 😜

@ronniefromOR Жыл бұрын

Great work

@TheExcellentLaborer Жыл бұрын

I appreciate that Ronnie!