This video is almost 8 years old & has the most clear explanation on how to true a rim. Every other video confused me, this one was straight to the point & i actually learned something. Thanks bro !

this was the clearest and most unpretentious video.

Very well done. Simple/clear explanation. I got my two rims straightened out in just 5 mins, with an $8 tool.

Nicely explained in under 4 minutes, thanks. Some other video took 12 minutes to ramble and confuse the explanation.

Thanks for this. I tried this once in junior high - I was winging it and the result was a disaster. After that I was too intimidated to try again until I watched this. Today I got the rims on my bike and my wife's bike straight as an arrow and the brakes adjusted perfectly. Thanks again.

That is fantastic, Out of all my years of having bicycles I never knew this was possible.I always assumed if my bicycle rim would wobble it was caused from being bent or if I has loose spokes I would just tighten the snot out of them... Good Stuff & thanks for sharing!

I started doing my own a few years ago, way more cool than paying a small fortune at a shop ,all these helpful vids on you tube mean you can all do it yourself, just be brave and go for it ,air forks are easier than you think /bottom brackets/ all will save you money 💰 doing it yourself and you get satisfaction you've fixed yourself own bike 🚲 🤟🇬🇧💯

Excellent video fixed my bike very quick. Took my bike to a Giant dealer they couldn't fix the brake rub!! This worked like a charm!

This is a very well done instructional video! It explains and effectively demonstrates the essentials very quickly and clearly.

Using this technique I was amazed how well I was able to true this wobbly bicycle rim. Just happened to have the tire off and the inner rubber liner as well. The back side of the tightening screws for the spokes on this wheel were slotted for a regular screw driver. Using the screwdriver instead of a wrench or pair of pliers made the task even easier. This wheel is spinning like a roulette wheel now. Thank You for your informative video.

Here’s someone who can explain the problem and the fix in a very short period of time. Thanks!

I really appreciate this simple explanation. I was ready to take a $50 bike in for $100 tune up. Now I will fix it myself!

Time is money. Time is valuable! This video is less than 4minutes and was clearer than the all the other 10+ minutes! Great video sir!

Mate, you’ve saved me! I was struggling for like 20 minutes then tried this out and worked immediately!

Your video should be No.1 on youtube search for bike wheel truing. Thank you sir

Excellent! Short and to the point.

Great, simple lesson on how to get your wheel to spin without a wobble. I was taking my wheels into the bike shop tomorrow, but I have no wobble in the wheels now. Thanks much!!

Thanks man, that’s all I gotta do? Thought I would have to transport to bike shop and back and be at the mercy of the chip reader! That is a smooth/ clean video explanation that will live in infamy now.

That explains a lot. Had been looking at my bike for a while just to notice two spokes were broken.

I watched maybe 10 videos in relation to that and was unable to understand but yours is the perfect one❤

Lifesaver. Honest video with clear instructions. Thank you!

Thank-you! Great job explaining which spokes to tighten and loosen. Fixed my wobbly tire at home!

This is really helpful ! Thanks for sharing your knowledge and saving me money at the bike shop ! My wheels are now pretty darn true !!

Thank you for that video. Im using bime to get to work, my spoke have broken so I had to weld a bit to it so its not too short anymore but watching this sparked the whole process of fixing it as well was bent really bad. Thanks again mate I hope you are doing great

dude, this video was amazing, probably one of the best videos I’ve ever watched, keep it up.

Important to deflate/remove the tyre and squeeze the spokes together after tuning to remove residual tension.

Amazing instructions straight to the point clear thoroughly done. My roadbike wheel is always crooked thanks.

Quick & informative. Perfect. Thank you.

Thank you Sir. You have thought me something new for the day and save me $20

This is better explained than other videos seen here on youtube. Also shorter and to the point.

Thanks, you saved me a lot of money. I bought a tool for 3 dollars here in Norway 🇳🇴

simple explanation makes this better than most other videos

Very straight forward, great content.

Actually useful guide, well done dude 👍

Ended up being a bit more of an art but my wheel seems to be true(ish) now. Thanks.

Very clear and straightforward. Thank you

Extremely helpful video, good job

Thank you so much, this was much needed and very helpful

Mate, thank you so much. Halfords quotes mr £65 pounds but I have just done it myself for £5 (for the tight key) YOUR A LIFE SAVER!!!

Thank you for the introduction, appreciated!

Very good video and easy to understand. Thanks bro.!!!

Excellent presentation, thank you 😊

Great video thanks for keeping it simple

Thank you for clear instruction!

Thank you for this video!

This is amazing! Easy fix in 5 minutes! Thanks a bunch

Very good and clear instructions.

great, straight to the point, thanks

Thanks for the Spoke tool info, Knowledge is power,God Bless

Well explained bro showing us which side you made it simple n easy to understand u get a like from me lol

Thank you dear... Very useful tip... Well explained... ❤

Clear video thanks for this!

Great video, thanks for sharing.

Saved me good video brought spoke key tightened every single spoke first time 😂

awesome this is what i was searching for

Thank you! I've always wondered about spokes - adjustment, and I go back a-ways. I can remember when we would convert the Schwinn Stingray to a BMX bike...

Excellent keep it simple makes much more sense when there's not a lot of verbage

dude i love you for this

Cheaper way than investing in a truing stand at 300 quid good video thanks

In general, how tight should all the spokes be? Just like lightly hand tight? Or tighter than that?

Great Video. Thanks

Do you need to loosen opposite side spokes as you tighten so you don’t create a flat spot in the wheel?

Thank You!

Yo that was so clear thank you

Awesome video thanks

Brilliant information 👍

Thanks homie 👍 big help

Great help, thanks.

It done the trick thanks buddy 👍

Awesome video.

Very helpful, thanks

Thank you for the video

excellent and useful video

Thanks man well done

excelent video, thanx dude a lot :)

You are awesome.

Thank you so much 🥰

Perfect thanks 🙏 💯

*_Oh, thank you, Master Yoda! Now I can go out and conquer the world._*

That's awesome. I thought that my wheel was bent but maybe I just need to have this done. They want $25 from my local (not so local as it's in a few towns or cities over) bike shop to straighten it or true it up.

V helpful. Thanks

You're God sent

Thanks bud 👊😎

Thank you!

Dude thank you

Helped a lot

Nice one Subscribed Please keep it comin

U r a good guy

Amazing

Gunna see if it works but great vid 🎉very simple

Thank you for such a no-bullshit answer to what starts as an easy question! These other guys, "The thing of it is..." And once they've done complaining about "that one time" and telling the story of their stupid friend and the day their niece got their first whatever, and sprinkle in some technical jargon "the ACTUAL nipple ITSELF" makes me furious. As William Zinsser put it in On Writing Well: Say your thing with as few and small words as possible without compromising the meaning, then make for the nearest exit.

thanks boss ❤

Thank you !!!

Quick and easy.

My back wheel is slightly bend it's a ebike so to take the wheel off will be a hassle can this tool straighten it?

I have a fixie bike and the rims are almost 10 years old and the spokes have never been tightened. The rims are straight but spokes are loose! Can I just snug them up or does it have to be done in a special pattern I dont' even want to make them tight just snug so they are okay...

Thank you.

Good tuition.

Hey....just want to say thanks 😊

What a wizard!