why you sound like an airline attendant teaching me how to put on my seatbelt

Today I have a completely new video format for me. Let me know what you think about it! kzfaq.info/get/bejne/is94jdKq1q-yl6s.html

What’s really important is don’t take the cpu off of the socket when it’s covered with thermal paste, you will risk getting it on the back of the cpu, or worse on the socket. This applies to anyone updating the cpu mostly. Also I’m a firm believer in using the large pea in the center method in applying thermal paste, as sometimes lines will cause the paste to leak and you don’t want that. Try and make sure you use a thermal paste that’s nonconductive, it will be much more forgiving if you have problems..

You're a lifesaver brother. Thank you.

The mic quality is deathly good, What godlike mic are you using

I am getting high temps on my CPU. But when I fitted it I made the mistake of not adjusting all the settings before applying the paste. I had to take it off then re-apply it. I should have removed and 're applied the compound but I didn't.... Should I just remove the cooler? Clean it and 're fit it?

Choice of heatsink appreciated. Along with the AMD demo and additional advices for Intel sockets. Also I always wondered how do these massive heatsinks attaches react after moving the caise around a few times or more. Same for some mobo's PCB does it break sometimes? (spoiler: haven't o/c a system ever since the k8 era :)

Took one apart a while back and forgot how to put the clip back on. Heard you say through the cooler and eureka!

This is an amazing video, it would help though if I made the slightest bit of research and realized that the new cpu fan mount is to small for my mother board 😀

i changed my cpu cooler with cooler master hyper 212 evo v2 but while changing it my motherboard was already in the case and i did vertically there fore the cooler slide one side 2 times whilei i hold both screw driver and backplate in place can that cause any harm

What are the things required to Replace old Damaged Fan and install New. Just to telling System model that's it? or what? Please Help

hi i just put a new cpu cooler on my amd athlon x4 and windows wouldnt let it boot said the fanis broken! i repalced it with a duel fan and looks the same as the one you are installing

I have a question - Can I put the fan on the cpu other way around, since it blocks one of my RAM slots, or should I just get a slimer fan to unlock the second RAM slot?

Nice epos!

Upgrading the cooler from an intel stock cooler, will I already have a backplate thing, or to I have to mess around with the back of the motherboard? Thanks for the help :)

Good job, I did this to my previous game pc and could not close the case anymore, now I have a game pc with a intel stock cooler, and I was thinking about upgrading it, but can you say if it is worth it or not? Im worried that the big cpu heatsink wont fit my current pc aswell.. and can u answer my question if it is that bad using a original intel stock cooler?

would it be ok to use alcohol prep pads? instead of rubbing alcohol? they are 70% isopropyl alcohol

I have a ryzen 5 1400 and it has the hatch and 4 screws. What do I do? I can’t seem to unscrew the screws because even using small screw drivers it can’t fit into the screw because it is blocked at an angle. Let me know if I’m being stupid And just need to yank it off or something.

Nice tutorial. just what i needed for my upcoming fan upgrade from my stock FX-8350 (loudest fan in the world?)

Whats the thing called at 0:34 because i cant screw in my heatsink in to my new Motherboard

thx for the help!

Great Vid!

do you think amd 3590x will work their?

the screws are stuck have any tips

Thank you!

Gonna get a Quad core AMD for my AM2/AM3 MOBO thanks for the help gonna order my parts when i get my check. TY :D

Mr... why you not use another side with fan no.2.?

i have a pentium 4 (i know bite me, it was a hand me down) but the heat sink was attached by latches.

you did not let mutch place to set the RAM

Compound might hold cooler after screws removed/ twist gently, back and forth

Super clear! Thanks!!!

i am an idiot got me a new heatsink unboxed it and dropped it TWICE then i tripped and broke it YAY a waste of money

Quesrion: do you have to take the ram out first

how do i know which cooler is for my PC?

this actually helped me alot because im using that SAME exact motherboard so its nice to know what kind of clearance i can get with it

You sound like a young semore Skinner.

Is static not a problem with this? In other tutorials it seemed to be a big problem but you just went right on with it

How long does stock cooling paste work?

We have identical parts except for the brand. Mine can't reach the lock, what to do?

I have a old HP that needs upgraded. Still works wonders. Can even play Sonic Frontiers on it which is a plus. Going to buy a new heat sink soon with a fan so wish me luck. Gonna need it. :)

Would I have to take out my motherboard if I upgrade to Cooler masters EVO 212 heatsink?

Is fan cooler better than those coolers

some one help me my amd heatsink lock clip is broken how to buy clip alone

well after these steps my pc refuses to turn on after replacement... um. rip pc?

can I just wipe the thermal paste off of the cpu or do I need to use some of that stuff you are using?

My cup stuck on the fan... How to "unstuck" it?

Does the port matter? I have a cpu with lga1151 but the cooler I'm looking for supports different port cpu does that matter?

Subbing for that voice hot damn

Nice video! =) I have one question though. If I don't have that thermal surface purifier or rubbing alcohol, is there any other purifiers I can use, like soap or for example chlorite-based bleach liquid or something?

Immediately after you removed the motherboard, there was a white rectangular piece underneath you picked up, what is that? I recently took my older pc apart to replace the motherboard and that was floating around in the back of the case, I have no idea what it's for!

Noob question, so for a heat sink like this one does not need to be powered at all? Except for the fan of course.

Thank you! Can you do a vid on how to replace a cpu? You explain things so well and I can't find any other good videos for replacing cpu's Axel

Take my advice, I went with a Hyper 212 Plus, which is bigger, I only have a mid sized case and there's 3mm of headroom for the cooler, DO check the space you have before buying the cooler.

does the cooler come with all of the cables and stuff like that or do i also have to buy that seperate

hello....is it ok if the heatsink which is in 3 pins be plug to a 4 pins motherboard?is there any problem in the future that may arise?

I am very happy you Video

HP got lazy and added a cheap CPU cooler on my Gaming Pavilion PC. They got pretty cheap and the fan is really loud too. If I replace the fan and cooler I need a quiet cooler/fan. If I replace it and should I have no issues at all? I want it as quiet as my mom's PC. It shouldn't be making loud noise at all. :(It's getting annoying I can't hear my games on my PC either.

can you do a video about adding a graphics card to pre built pc

1:48 Right here. This is the part I'm stuck at. *How the **_hell_* do you get that little cable to come loose? I thought there was maybe a clip but nothing I try works and it's practically right against the PSU. I just need to check my CPU because my PC quit turning on the other day.

i had a question, can you install the hyper 212 evo without taking out the whole motherboard?

I wanted to stream my xbox 360 on twitch or youtube. And I have OBS but I don`t have a elgato yet. I only have a AverMedia Game Capture HD (Not The Portable One) Could You Help Me?

I want to replace my stock cpu fan Hope i wont break my mobo or cpu trying to replace it

What if I stupidly removed the mounting hardware on the motherboard, and now when I try to put it back on, the screws have nothing to grab on to?

I have one question. Why is the cooling fan not placed on the opposite side. Wouldn't it be more efficient if it was pointing to the vent of the case?

what about the backplate?

My CPU is usually stuck to the cooler. You just pulled it off like the thermal paste was still wet rather than baked for 5 years.

He did not mention that you have to hold it in place on the other side

Hey! Nice video but to replace the cooler do you have to remove the thermal paste

thanks

why is the fan in another direction?

Can I just change the fan with a case fan?

A68HM E33 v2 compatible on that deepcool gammax 400? and what is your motherboard?

can i just use the old heatsink or do i need to get a new one?

nice

can you use vodka to clean the thermal paste off?

what if the clip is broken

Nice vrm heatsinks...

could you to the one with four screws please would help me a lot

So, I went to remove plastic part from my fan to remove it & the screws are headless. How do I continue to remove the fan with this problem?

What is the cooler model no????

parents pc 98 degrees idle. i will fix it tomorrow lol pc is so noicy

You sound like shroud 😊

Why'd you have to take out the motherboard? Did you build your rig upside down...?

So you dont have to do a windows reinstall or anything?

What is the name of the cpu cooler that you uninstalled?

do i have to take out the motherboard if its intel?

I cleaned my cpu with my wATER HOse but after it no start, i tryed to change computer screen but the compoter can not start to lkancuyh

I thought this would be helpful but this is not accurate at all, I undid the clamp and my cooler still won't come off

yaaaas

Can you put any fan and any heat sink on any CPU

this big o heatsink for only under 30$? TAKE MY MONEY

Gonna clear up a few mistakes I saw in this video, so people aren't at rick of destroying their new cooler or motherboard. He often says one thing, and does another in his videos. So here is a list of things to make for a safer installation. 1. Always disconnect everything from your motherboard and REMOVE it from the case (place it on a non conductive, non static producing surface) make sure to ground yourself any time you are working with the motherboard or components. This makes installing the fan much easier then having it inside the case where space for hands and viewing angles is limited. 2. A line of thermal paste isn't horrible, but it's not the best as leaking with a single thick line of paste occurs a large majority of the time, and this could be bad if you have conductive paste. Always go with the tried and true method of a large pea size dot of paste in the middle. 3. As he said but didn't practice in this video. If you have already placed the cooler to the CPU and needed to lift the cooler back off, then wiping and reapplying paste is best as you may have spread out the paste to much and caused air pockets, he should have re filmed that part so as not to confuse people. 4. Never pry or twist the cooler to see if its sturdy and attached. A slight (and i mean slight) press on either side of the cooler to test if its fully attached is ok, but normally if you have it clamped or screwed down fully, it's not going anywhere. To many times I see videos on "how to" with computers, and for the most part they are fine, but the people making the guides need to be less lazy and re-film parts they know they screwed up on because some people out there do as they see, and not what they hear (I know a few myself). When I saw him grab onto the cooler and try rocking it back and forth to check if it was attached, I kind of winced a bit. That is a very easy way to snap the CPU right out of the socket or bend something that shouldn't be bent. You would be surprised how easy it is to snap them off. Be gentle whenever working with a motherboard and components. Breaking something could be expensive to replace, and may render your warranty void. It's best to be methodical and gentle from the start.

Can I do it in the case lol?

My pc is older than me and sounds like an airport,the brackets for the dust filter on the power supply wore off,the sdd is dead and it has 2gb of ram... BUT it can run S.T.A.L.K.E.R. shadow of chernobyl so i am happy for now.

I broke my un zip cooler

If you are never using the old cpu cooler again pls give it to me...

sounds like iNotorious

how to upgrade when you don't already have a cooler

my cpu ripped off the motherboard wtf

Socks + Carpet = Disaster D: Becareful!