HOW TO UPGRADE your HUINA 580 to Hydraulics with the MAGOM conversion kit!
Рет қаралды 33,728
3 жыл бұрынThis is a details step by step on how to convert your Huina 580 to a fully Hydraulic excavator. This is part one which shows the new metal arms and hydraulic cylinders as well as the servo installation to the valve block.
If you have any questions please let me know as I will answer them in the comment section.
The lengths for the hoses are approximate as the kit is designed with the Magom arm for the excavator.
bucket hose length 20.5 and 22 inches.
the stick cylinder is about 18 and 20 inches.
the boom cylinder you will have to cut to length based on where you place or run the hoses.
Here is where you can purchase the kit.
original 580 arm hydraulic kit
www.magomhrc.com/en/huina-580...
Magom arm kit
www.magomhrc.com/en/huina-580...
Upgrade hydraulic kit for Magom arm
www.magomhrc.com/en/huina-580...
Thank you for watching and part 2 will be up next week.
@rcrelatedstuff6092 3 жыл бұрын
Wow, I have been waiting for a video like this. I hope you explain and show every step of the conversion. Looking forward to this man!
@RCConstructionHobby 3 жыл бұрын
Yes every step in detail. Hope it helps.
@EnjoyTour993 2 жыл бұрын
Excellent huina 580 conversation
@R.C.A.D. 3 жыл бұрын
😊👍 Excellent video my friend, Very informative! I watched from front to back, along with at least 15 seconds of every commercial.😂👍👍
@RCConstructionHobby 3 жыл бұрын
Thank you. Glad you enjoyed it
@rcconstructionuk114 2 жыл бұрын
Loving the conversion. Im doing mine on my channel. Work in progress
@montesamapping 3 жыл бұрын
Really accurate!! Useful also in case of maintenance! Looking at the costs...I think buying a new brand Kabolite 336 GC will cost nearly the same than upgrading (unfortunately) ...but in the end you will have 2 excavators (for sure a plus) !
@RCConstructionHobby 3 жыл бұрын
To be honest the 336gc is not that great. I like the huina 580 conversion way better. If anything get the volvo ec160 from double e.
@montesamapping 3 жыл бұрын
@@RCConstructionHobby maybe you are right...Kabolite 336 GC is not so powerful (only 3kg forearm, 4kg bucket) ...your suggested upgrade hope maybe better !
@dominiekvinckier2636 3 жыл бұрын
Hey verry good explainend thanks 👍👍👍👍👍👍thumps up hope Magom nows from the 14mm piece
@danielemulazzi1615 3 жыл бұрын
Woww... spettacolare...bel video ... ciao dall'Italia
@RCConstructionHobby 3 жыл бұрын
Thank you
@danielemulazzi1615 3 жыл бұрын
@@RCConstructionHobby grazie a te del bel video ...mi è venuta voglia di acquistare uno scavatore RC ... ciao Grande
@RCConstructionHobby 3 жыл бұрын
fantastic! it is a great machine to play with.
@Idahoprepper71 3 жыл бұрын
If you warm up the hose first it will slide on the fitting really easy.
@RCConstructionHobby 3 жыл бұрын
Yes that is a good tip. These were not to bad. The collar.thst goes on after was a probably harder or more annoying.
@minitoyfamily Жыл бұрын
❤
@noelblondeau7994 3 жыл бұрын
thanks for your video. do you have one for opening the cabin door?
@RCConstructionHobby 3 жыл бұрын
Sorry I dont have a video of it. I cut the door out and put a 3d printed design that I created in place. Tools I used was a Drexel tool and a metal cutting blade.
@The-Warm-voice1359 3 жыл бұрын
its really really wonderful build good job bud excellent work👍 but i see you put plastic servo you must put it metal gear servo because the pressure needs to the high pressure the plastic is useless anyway i hope 2see wheel loader hydraulic from huina himself we needs hydraulic no more electric its wonderful video pal thx✋
@RCConstructionHobby 3 жыл бұрын
I agree it needs better servos. These are the servos that magom supplied in the kit.
@The-Warm-voice1359 3 жыл бұрын
@@RCConstructionHobby yeah dude that what's up try use servo 4 earth mover 870k micro servo 3kg 4.8v this servo on earth mover 870k already when you buy it her he metal gear and very strong
@dcfphilrc5832 2 жыл бұрын
Nice✅👍
@alangriff1 3 жыл бұрын
I'm loving it so far. If you were to use metal servos do you have to use a specific size (guessing the mounts would have to match the servo block....right)
@RCConstructionHobby 3 жыл бұрын
Yes 9g servos will fit. I would think metal servos will do. That is something I want to do over the winter.
@RoadgamerTV 3 жыл бұрын
Thanks for the new video, best wishes to all Americans and congratulations to the new president. 🥂 Stay healthy my friend and greets from Berlin Germany !! 😷 👍
@RCConstructionHobby 3 жыл бұрын
Thank you hope you are doing well. From Canada.
@ronnieterry7616 3 жыл бұрын
I know I'm kind of off topic but does anybody know of a good site to watch newly released tv shows online ?
@TheSwissMAVERICK 3 жыл бұрын
Hello! Could you please explain what the difference is between to the original arm and the magom arm? It it longer and can lift higher? Is it worth the extra money? Greetings
@RCConstructionHobby 3 жыл бұрын
Yes the main boom is about the same length. But the stick is longer and will lift higher to get into the tamiya trucks better. I think its worth it for the extra height.
@TheSwissMAVERICK 3 жыл бұрын
@@RCConstructionHobby ok cool. Thanks a lot
@mitchellhovell4154 3 жыл бұрын
So did you have to buy the magom arm kit and then then the upgrade kit for the arm ? Or did you just buy 1 kit with it all
@RCConstructionHobby 3 жыл бұрын
You end to buy the arm and the hydraulic kit.
@tommyrescue82 2 жыл бұрын
Hi again, I just like to know the closed length and open lengths of the cylinders please. Magom makes them 10mm od to 18mm od
@RCConstructionHobby 2 жыл бұрын
Great question. I am not sure but if you message magom Anna will be able to tell you the exact measurements.
@rchaulproject3784 2 жыл бұрын
I like the simple way of your explaination ... Its is more powerfull after upgrade?
@RCConstructionHobby 2 жыл бұрын
Thank you, and yes it is more powerful and accurate.
@rchaulproject3784 2 жыл бұрын
@@RCConstructionHobby cant wait to upgrade my unit
@Ronson1996 3 жыл бұрын
and what to do if one caterpillar does not drive because the metal is cracked and can stick together?
@RCConstructionHobby 3 жыл бұрын
There are replacements available on aliexpress or wuehlbox.com
@ajisaibong4735 3 жыл бұрын
Can it fit at other RC excavator such as WL16800 ?
@RCConstructionHobby 3 жыл бұрын
With modifications it can.
@tommyrescue82 2 жыл бұрын
Hi I like to do this to my excavator as well but I need to know the Length of all the servos please
@RCConstructionHobby 2 жыл бұрын
The servos are 9g servos. So standard micro servo size. Why does the size matter? It all fits.
@greymonleggomon1185 2 жыл бұрын
Hello. I'm new to your channel. I'm just getting into rc excavators which I've got the huina 1593. Will this hydraulic kit fit the 1593. Also do you know where I can buy metal tracks for it as looked all places I could think of with no luck. Many thanks
@RCConstructionHobby 2 жыл бұрын
Hi Graham, I dont think the hydraulic kit will fit this machine but you can get tracks from aliexpress. just search up huina 580 tracks.
@greymonleggomon1185 2 жыл бұрын
@@RCConstructionHobby thanks very much ill have a look and let you know how I get on
@RcNeil Жыл бұрын
How much longer is the magom arm vs the stock arm?
@RCConstructionHobby Жыл бұрын
About an inch and or 2. It is worth it.
@witneydiggersrc3251 3 жыл бұрын
How would you rate the quality of the servo block?
@RCConstructionHobby 3 жыл бұрын
The block is ok. I find that it does not hold the cylinders 100% in position. There is some sagging when the valves are closed. I think that the chinese stuff might be stronger at holding pressure
@witneydiggersrc3251 3 жыл бұрын
@@RCConstructionHobby suffer from the same problem by the sound of it, not a Magom block though. I presumed its down to a leaky cylinder ? although it works fine.
@RCConstructionHobby 3 жыл бұрын
I have had leaking cylinders as well. It was not a good start with this kit. I dont know if they make there own cylinders and block or just get Chinese and ship it as a kit. They told me they tested everything yet I had 3 leaking cylinders. And a chattering servo for the main cylinders.
@alangriff1 3 жыл бұрын
@@RCConstructionHobby Not exactly comforting at the price (MAGOM is not cheap)...should be a lot better
@Ronson1996 3 жыл бұрын
Hi, what maximum battery can I install for the Huina 580 excavator? I would like 5000mha, but that it would fit into the excavator instead of the original battery
@RCConstructionHobby 3 жыл бұрын
You have to modify the inside to fit a 5000mah. I fit a 5000mah and have hydraulics but has to be a shorty battery not a long 5000mah as it is to long.
@timeflys3322 2 жыл бұрын
Do you know if this company ships to the US 🇺🇸
@RCConstructionHobby 2 жыл бұрын
Yes I believe they do.
@timeflys3322 2 жыл бұрын
Thanks, subscribed
@skacel12 2 жыл бұрын
Please what Is this for music?
@RCConstructionHobby 2 жыл бұрын
Alone -Emmit Fenn. It is in KZfaq music.
@rc-huina8221 3 жыл бұрын
Wow
@OniMikeVision85 3 жыл бұрын
awesome but as much as this cost just buy a hydraulic one thats crazy expensive
@RCConstructionHobby 3 жыл бұрын
I agree but for someone new who is unsure this is a good option to start and get their feet wet.
@oguz6270 3 жыл бұрын
Can you tell me the name of the musician
@RCConstructionHobby 3 жыл бұрын
Do you mean the beginning song? Alone-emmit fenn. You can findnit in the youtube songs.
@oguz6270 3 жыл бұрын
@@RCConstructionHobby yes i asked the beginning song, well thanks i will check
@sed6 3 жыл бұрын
Nice video. But $750 in upgrades on a $500 machine? For that $1250 the 4200xl excavator might be a better choice of you can afford it all at once.
@RCConstructionHobby 3 жыл бұрын
well ya since the 4200xl is on sale right now sure go for the 4200xl. but if you want to build something yourself or if you want something smaller then the Huina hydraulic might be a better option. then again you can get the new Kabolite for about $1700 or the EC160. So many choices its up to you to decide what works for you. This is just one option.
@novideosnovideos544 3 жыл бұрын
Where can you buy the 4200Xl for 1250 USD?
@RCConstructionHobby 3 жыл бұрын
@@novideosnovideos544 I think that it was a black Friday promotion.
@philiprogers4071 2 жыл бұрын
Thnx for the video. Your pronouncing "chamfer" wrong. To simplify it, say "sham, fer", that's still spelt shamfer, but is the correct terminology for chamfer, I'm English, we invented grammer lol..
@RCConstructionHobby 2 жыл бұрын
Lol I'm canada we say chamfer. But it's like the English say aluminium and we say aluminum.
@philiprogers4071 2 жыл бұрын
@@RCConstructionHobby Isn't Canada the best part of the USA..
RC Construction Hobby
Рет қаралды 18 М.
RC Construction Hobby
Рет қаралды 13 М.
Gufee.medalin
Рет қаралды 9 МЛН
HMG CREATIVE
Рет қаралды 897 М.
Potato RC Channel
Рет қаралды 572 М.
Топовый Wildberries
Рет қаралды 2,4 МЛН