Installing All The Electronics Into the Huina 580 Hydraulic Conversion from Magom. Step By Step!

Рет қаралды 13,539

3 жыл бұрын

This is the last video of this install series where we add the Magom hydraulic kit into the Huina 580. I go into detail on how to install all the ESC's and wiring to get this machine to work!. Also, a quick preview of the new colours for the excavator. If you need more clarity on what gets connected to what let me know.
Thanks again to all my loyal subscribers and thank you to all you non subscribers... It's ok if you are not subscribed. If you are worried that you have to pay for subscription don't worry it's FREE!!!! That is right no commitment!
Link to the sticks cults3d.com/en/3d-model/gadge...

Пікірлер: 41

@anthonyjones6107 3 жыл бұрын

Thanks for the video can’t wait to up grade mine 👍

@RCConstructionHobby 3 жыл бұрын

Good luck!

@R.C.A.D. 3 жыл бұрын

Watched from start to finish,😊👍 Great job all around !

@RCConstructionHobby 3 жыл бұрын

Awesome! Thank you!

@R.C.A.D. 3 жыл бұрын

@@RCConstructionHobby My pleasure 😊👍

@RC-CARS-WORLD 3 жыл бұрын

awesome,, great video 😀👏

@cyker30 3 жыл бұрын

Need this to upgrade mine.. nice vudeo..😊

@RCConstructionHobby 3 жыл бұрын

take a look at the aliexpress upgrade. it seems to be a little better and cheaper. I have issue with the valve block. seems a lot of people do.

@PYROTEKNIX_ 8 ай бұрын

I want to get a hydraulic upgrade but don’t know if I should go for the cheaper version from huina or just get the magom arm

@RCConstructionHobby 8 ай бұрын

Get the magom. It's better.

@tommyrescue82 2 жыл бұрын

the track motors have a round green board on them do i need to take them off??

@RCConstructionHobby 2 жыл бұрын

If you are doing the conversion yes. You will want to install ESC's to replace the green board.

@MicaseHD 3 жыл бұрын

Where did you get the larger stick nobs on your radio in the thumbnail of this video???

@RCConstructionHobby 3 жыл бұрын

I designed them and printed them. They are available on cult3d to download.

@billyrogers9624 3 жыл бұрын

So was everything here all bought in one kit?

@RCConstructionHobby 3 жыл бұрын

The kit from magom has everything you need to convert it to hydraulic. You have to buy the huina 580 separately.

@PYROTEKNIX_ 7 ай бұрын

I’m new to this hobby and all those wires are making me nervous

@MicaseHD 3 жыл бұрын

What direction does the pump run??? does it matter??

@RCConstructionHobby 3 жыл бұрын

Yes the pump only runs one direction.the valves decide which direction tge cylinder goes.

@sed6 3 жыл бұрын

How many more videos in the series until you're done? And when's the next one?

@RCConstructionHobby 3 жыл бұрын

Thst is it for this series. Back to the regular videos next week.

@RCConstructionHobby 3 жыл бұрын

Every Sunday 7am new video

@krisclark4031 3 жыл бұрын

Hi nice machine could you put up a link of were your got your remote please

@RCConstructionHobby 3 жыл бұрын

I bought the transmitter from Amazon. The sticks are 3dprinted. Search flysky fs-i6s

@krisclark4031 3 жыл бұрын

@@RCConstructionHobby thanks but in still struggling to fined one that has both sticks that return to the centre

@RCConstructionHobby 3 жыл бұрын

You can buy the centering stick for the flysky transmitter. Very easy to do. They cost like $5. Don't walk away from these just because the left stick is not centered. Buy the transmitter and add the stick centering kit. Very easy to do.

@krisclark4031 3 жыл бұрын

@@RCConstructionHobby ah ok thanks a lot I didn't know I could do that

@vbdino 3 жыл бұрын

Your radio modification is also highly interesting if those are 4d sticks

@RCConstructionHobby 3 жыл бұрын

no they are not 4d sticks but they do look like them. I just 3d printed them.

@alangriff1 3 жыл бұрын

Is it usual to use brushless ESCs...I see most rc excavators using brushed ones

@RCConstructionHobby 3 жыл бұрын

Deoends on the type of motor. If it is a brushless motor then a brushless esc. If it is a brushed motor then brushed esc.

@alangriff1 3 жыл бұрын

@@RCConstructionHobby yes..I understand that. Thanks

@alangriff1 3 жыл бұрын

S then is a brushless motor better to use with hydraulics?

@RCConstructionHobby 3 жыл бұрын

For the pump yes. For the tracks brushed is better. Think if you want fast then brushless. If you want slow then brushed.

@nisanbharati8040 3 жыл бұрын

Hey buddy I am a school boy of class 12 . After some days there will be a science exhibition. It will be very helpful to me if u make a video on how to install all wiring and hydraulic kit. In an excavator

@RCConstructionHobby 3 жыл бұрын

I made another video on installing the hydraulics. This video shows how the electronics are installed. I would be a very long video if I had to show every single step like cutting the wire and soldering.