Thank you Dracula!

15 years later I find out the key is to put the paint on the pad with a brush..........

I have used the edge painter many times...and only now I learn to use a brush to load it up. Great tip!

Great hints! I tried your methods today and the results are two rooms were painted finished in 25 minutes each! OMG! What a life saver!!!! Thanks!!

Going to use a brush to apply paint to the edger. Makes sense for less mess. Thanks for the video.

The results are great! Thanks for the tips

Hi sir brilliant teacheing as you mentioned most people and most of the videos show dabbing the pad in the tray but the way to go is your technique brush the paint on the pad great job thank you for sharing

Great advice... I’ve absolutely been doing this wrong and I’m so glad to have found this video!!

Incredible results

Ooo. Thanks for the tip of painting ONTO the shur-line tool!

I love your voice and your accent! This is great. I'm doing this today

Thanks for the video. Going to purchase one of these.

Thank you man. This is really great.

This retired pro used those to good effect. If you don’t go too far with a loaded edger you won’t get skips. With a high contrast finish you need a heavy coat. If your roller guy isn’t following the cutting immediately use the angled front edge in swipes to knock down the ridge that inevitably forms along the outer edge of the swath if carrying enough paint for good coverage.

Fantastic job color and accent. :)

I wish I had seen this 3 years ago. I got paint all over the ceiling because I dipped it into the paint t tray. This time around, I bought a paint shield.

HILARIOUS!! I honestly LOVED the narrator!!😂😂😂

Now thats a good idea to paint the bottom with your brush. I am using one tomorrow for the first time and will follow this way instead of the other videos that show it being placed in the paint tray to cover it.

Became a subscriber because of this helpful video.

Thank you for the video!

Good job!

I use a small roller and roll paint onto the SHURE cartridge

This qas amazing ty

Thank you!

Great results! I’m a pro and I’m gonna get one and see how it goes. Cheers

Wait a minute! I just now learned to apply the paint with a brush.

Amazing

When did Arnold start doing this

How would the results come to being used on a orange peel textured wall ?

Dracula hands down has the best how to use an edger pro video on YT. Paint brush technique was a game changer.

So I've done it wrong and used the tray so much so the paint got up onto the white skirting.

Operator error is usually why a product gets a 1 star review. 3 an 4 star reviews are those who are a bit more realistic. 5 star reviews are those who followed this video or already knew the tricks you helped us all learn.

This product will work if you follow this video. There is one drawback with the product: the wheels do not allow for you to get the edger right up against the surface not to be painted (i.e. ceiling) to ensure coverage right up to that surface. There is a small gap of about 1/16" to 1/8". Manufacturer needs to allow for the wheels to be adjustable to allow the user to get as close as they want to the surface that you do not want to be painted.

Yup thing works like a charm load with brush and don’t press down it

They work good in most situations. However when cutting near trim the rollers don't always roll on the edge of the trim tapers to a thin edge.

I can free hand faster...but this was a good use of that tool

Yogi Bear now doing voice overs.Clasic l

YES!

gorilla platform ladder is a must.

Dose it leave a dry line?

Great job! How did you run this along the baseboard? I tried it and I got paint all over my baseboard. Not sure what I'm doing wrong.

Ray Romano Dracula forgot to comb the paint so it blends in better when you roll it.

I''m a professional painter, and use that to do 16ft. ceilings with a pole. Always brush it on , never dip it in paint. If I have to do just the ceiling, it won't work on the rough textures, then I spray , and shield the cut ins.

I bought that a few yrs ago and I needed to touch up paint and needed to get close up to the edge but this scuffed up the wall. It left hugh scratch marks in the old paint. I immediately stop using it and had to sand the wall down but it was basically useless for me

I bought Sherwin Williams paint but the quality is not that good. Which SW paint type is the best ?

Hi do you know what the other color is for the other walls? Not the blue

I like to color,what is it called if u remember pls?

Hi there l have solution for that the best system ever waldo^s cutter edge you need see to believe not stop keep going and going thank

Does work if there popcorn celing?

How did your edge that baseboard ! Anybody can edge a ceiling or wall corner. How does this perform on baseboards

I was not able to do it.My tool had no rollers on it..

is it okay to paint same color on textured wall?

What is the name of the base color wall? I want to do that same color scheme .

Chocolate rain !!

How many coats of paint did you put on the wall?

I apply the paint with a squeeze bottle... faster and easier and no need to go back to the paint can...

How did you paint the corners ?

1 milion years later

You sound like a Swedish vampire

What do i think? I think you talk like Arnold Schwarzenegger :) good video thanks

Not sure about texture wallpaper

I wanted to get the Accubrush but Home Depot only had this hand held Sure line. OK I watched the videos, painted on the paint onto the pad, went back and forth SLOWLY (and back and forth and back and forth)..... it worked ok but the time I took to put the paint on the pad with a brush, wipe off when paint got on the edges, go back and forth over those pesky "dry" areas that kept coming up...... I thought I may as well watch a couple expert videos and learn how to just do it with a brush. I think I'll skip these disposable extra-step things, that might be useful, cheap enough for the disposable mind-set, and just learn how to do it right with a brush I can use over and over, as long as I clean it well. But thank you.

A plastic squeeze bottle of paint works great also....Vlad the Impaler!

Tips: 1. DO NOT dip the tool and pad in a tray of paint. Unless you have very steady hands you will get too much paint on the pad and on the frame or wheels and track it all over the adjacent surface you are trying to cut-in around. This is the #1 mistake people make when trying to use this tool and why they give up so quickly with it. 2. Go very slowly with this tool as the guy in the video did. If you go to fast you will all kinds of streaks and dead spots. 3. Go back and feather out the paint on the inside edge away from the cut-in line with a brush while it's still wet. If you don't you will end up with a strong line that will be visible after you are done painting.

Zoom in on the lines.

Are you Count Dracula?

the audio on this video is so soft i cant even hear it. womp womp

In the next episode, Kermit shows us how to use a 3/8” nap roller.

I waaant to paaaaint your waaaaalls 🦇🦇

He's right you do pay for what you get

FOUR,..FOUR beautiful corners,ah,ah.ah.,ah ahhh.😂

Applying the paint with a paint brush. Why didn’t I think of that myself? But he is completely mistaken in regard to speed. You do not have to move slowly at all. It’s mechanical. As long as you don’t overfill the pad it’s going to work with mechanical precision, regardless of how fast you move. That’s like saying you have to turn the pencil sharpener slowly to get good results. Whether you turn it fast or slow you get the same result.

it did mess up a few times i saw it and a pro painter could definitley do this with a brush

Sehr gutes Video, ich bin ein Profi-Maler und benutze den Kantenschneider, den Sie verwenden, und ich verwende nur die beste Sherwin Williams-Farbe. Sie veröffentlichen jedoch Fehlinformationen darüber, dass Sie keine Grundierung verwenden. Dies ist eine Lüge, die sie Hausbesitzern verkauft haben und die sie selbst machen jahrelang. Das Management von Sherwin Williams wird das nicht einmal versuchen.

No it’s not good I tried same as video still mess the edges F off paint edger

Oh yeah? Well almost all walls are textured, try your $5 shure line on those vs the pros and see if you can get the same result like your perfectly texture -free wall!

Super slow....time efficiency is as important as quality.

Lol Dracula

It doesnt work i've tried it and it doesnt work, i just wasted my money

What's faster.....paint drying? 🤣

just learn the brush technique. This one just takes too much time

It's a shame, but I see that you're using the pads badly. Surely you do a good job, but with the pads you have the wrong technique. That said without taking anything away from your good work. Here's how to use the pads properly. Painting by making an inverted U. Let me explain. FOR A WALL ADJACENT TO A CEILING: 1. Before going against the border, apply the pad on the wall far from the border, then slide it towards the border. It will make an inverted L.. 2. Glide the pad evenly with even pressure, you can go either way. 3. To remove the pad, slide it down. This will complete the inverted U. Remove by sliding and not directly as you do, because it produces peaks!!! TO SOAK PAINT WITH PAINT: Just immerse the hairs and rub the pad on the edge of the tray, it removes the excess and evens out the paint on the pad. TO REMOVE EXCESS PAINT ON CASTERS: Before repeating steps 1 to 3, rub the small rollers on a wall to be painted. It's a good precaution, because sometimes they get dirty. Wipe this part of the wall. Repeat steps 1 to 3 carefully. I am able to paint a very far wall with pads that fit long sleeves! FOR CORNERS (junction of 2 walls and a ceiling): We have no choice but to use the brush, which is the only one going into the nooks and crannies. FOR ADJACENT WALLS PAINTED THE SAME COLOUR: Use a roller with one end "closed" completely hairy. Never again will I make borders with a brush, it's too long and risky.

1:25, very slowly?/////.... I can do that twice as FAST with a brush... STRAIGHT LINE... When you depend on and get paid by the job, slow it's Not an Option...