How To: Use a Hydraulic Swage Tool To Crimp Stainless Wire Balustrade Fittings

No video

How To: Use a Hydraulic Swage Tool To Crimp Stainless Wire Balustrade Fittings | HAMMERSMITH

Рет қаралды 120,850

Күн бұрын

Watch this video to learn how to use a Hydraulic PRO Swager to crimp the end of stainless wire cable balustrade fittings.
Closeup shots of the process : 6:02
Shop our Hydraulic PRO Swager for 3.2mm and 4mm wire HERE: goo.gl/pbfPfS
Shop our Hydraulic MINI Swager for 3.2mm and 4mm wire HERE: www.hammersmit...
--------------------------------------------------
The Hammersmith DIY channel is the KZfaq channel for the Australian business, Hammersmith.
Situated in Adelaide, Australia; Hammersmith was established in 1946 as predominantly a wood turning company, but in more recent years has expanded the range of products that it sells to include building, staircase and furniture components in both timber and steel.
All of these products can be found on our online shop, and can be delivered to anywhere in Australia.
Shop online : www.hammersmit...
Learn our history : www.hammersmit...
Follow our blog : www.hammersmit...
Connect with us on Facebook : / hammersmith-diy-produc...
Connect with us on Instagram : / hammersmithdiy
Check us out on Pinterest : www.pinterest....

Пікірлер: 55

@ManoloFernandez434 7 ай бұрын

Thank you, now I am confident I can complete my handrail as soon as it stops raining

@alejandroluispaolucci9071 10 күн бұрын

Thank you, excellent & cristal clear tutorial…

@nomsolo9935 11 ай бұрын

4 AWG works well for 3/16" wire rope swaging.

@stoilybrothers9080 2 жыл бұрын

Thank so much for the great video.

@HelloWorlds__JTS Ай бұрын

Hahaha, at 7:17 "... you can see how easy this is; and it doesn't take a lot of force..." right after his eyes have popped out of their sockets at 6:58.

@joebromberg 18 күн бұрын

Thank you

@sagitario12ish Жыл бұрын

Good video complete information, awesome, you are the only one whos know what dies to use, wonderful wonderful wonderful!

@HammersmithDIY Жыл бұрын

Thanks.

@nicelittlebus 10 ай бұрын

Awesome tutorial 👌

@diydaveman 5 жыл бұрын

This is great information and all I need to do my job! Thank You!

@SuperheroStrength Жыл бұрын

Great video. Bout to get to work on mine now. Thanks.

@mountainmike1685 Жыл бұрын

I did this same single crimp and out of 2 ends 1 slipped. I think 2 crimps per end in 2 different spots is key. I would rather only crimp once but, It would ruin a hole run if one end slips

@timothymeads9933 2 жыл бұрын

Good vid guys. Thanks

@ladleo2989 Жыл бұрын

Thanks - very helpful

@norcoatomik1 4 жыл бұрын

SHOULD *** be enough he says , hmmmm , sounds like it SHOULD be safe . Hahaha

@jigbungcaras6131 5 жыл бұрын

Great video

@JenkinsBoatWorks 3 жыл бұрын

Great info, thanks

@HammersmithDIY 3 жыл бұрын

Thanks

@Batwam0 7 ай бұрын

8:30 sorry for being pedantic but test should show that the cable breaks before the connection, not that it pulled out of the timber. Your test checked the quality of the timber, not the fitting. Also, you didn’t say if the failure tension exceeded the fitting’s rating or not. If it pulled out below the tension rating, the test is meaningless. I’d recommend you do a test where the anchoring isn’t the failure point.

@Castaca27 5 жыл бұрын

Thanks Wyatt

@guloguloguy 5 жыл бұрын

Does that hydraulic press automatically "release" at some constant hydraulic pressure "maximum", or it it all done haphazardly, by hand pressure, "by feel" only?.... Do you use some type of "go-no go" guage, to determine if each crimp has been squeezed far enough?!.... THANK YOU, FOR A VERY NICE TOOL DEMO VIDEO!!

@HammersmithDIY 5 жыл бұрын

There is a maximum pressure release, but if you trigger this then you are either a weight lifter or there is a fault with the unit. 😁

@Batwam0 7 ай бұрын

@@HammersmithDIYis that a design pressure beyond which the tool will be permanently damaged or is there an actual pressure release valve or similar?

@HammersmithDIY 7 ай бұрын

There is a pressure release valve.

@Batwam0 7 ай бұрын

@@HammersmithDIY excellent 👍

@ironguyscom Жыл бұрын

were i can get that hydraulic crimping machine

@ameyc2 3 жыл бұрын

on cable for deck haas suggest turning 90 degree angle and do a second crimp????

@shornsparks20005 8 ай бұрын

Good video however it would have been much better if you could have had the camera a bit nearer so we could have actually seen things clearer

@luisfigueroa7305 3 ай бұрын

Watch the video at the 6 minute mark he actually does a close up

@dougoldfield9723 4 жыл бұрын

Good tool! Sometimes when I crimp the fastener will deform and bind. How do I keep it straight? Thanks

@HammersmithDIY 4 жыл бұрын

Not sure exactly what you mean, but perhaps give us a call if it is an issue.

@markrodgers7104 3 жыл бұрын

Do you have the same stainless fittings for 5mm stainless cable??

@HammersmithDIY 3 жыл бұрын

We don’t stock them, but we could get them for you if you emailed us a list of what you wanted.

@runarandersen3439 4 жыл бұрын

Hi. Nice video. But I wonder if this metode is ok for swaging shrouds on sailboats? Best regards.

@HammersmithDIY 4 жыл бұрын

Runar Andersen sorry, but I don’t know the answer to your question

@frankmiller95 3 жыл бұрын

The recommendation from this side of the pond is to use Norseman fittings. More reliable than swaging and it's named after you.

@jjforsyth3 5 жыл бұрын

How wide are the dies that come with this tool?

@zenonfitness6097 4 жыл бұрын

How would this go with Gym cables for max loads of 200kg?

@HammersmithDIY 4 жыл бұрын

Zenon Fitness I would have no issues with the wire breaking. My biggest concern would be what you would be fixing the fitting onto.

@dt.m4675 4 жыл бұрын

Do you have links for these different fittings? Also the tool link didn't work for me. Thanks for the video

@HammersmithDIY 4 жыл бұрын

D & T. M we are out of stock of this tool for another week, so I have disabled it on the website. The fittings can all be found on our website

@The_Crusty_Old_Hag_Next_Door Жыл бұрын

I’m having an awful lot of trouble trying to register an account on your website I just want to place an order.

@HammersmithDIY Жыл бұрын

We are aware of an issue. You don’t need an account to place an order. If you are still struggling you can just email us what you want.

@kevinhembree9097 6 ай бұрын

Do you ship to US ?

@HammersmithDIY 6 ай бұрын

Unfortunately we do not.

@djvinyljunkie 5 жыл бұрын

Hi Wyatt, superb video ! can you tell me what diameter the no.6 is? In UK and cant get your model here sadly

@HammersmithDIY 5 жыл бұрын

Not really sure of the diameter. I am guessing the 6 means 6mm, but can’t say for certain. The tool is made for crimping electrical cable, but we obviously use it for a different purpose. We can ship to the Uk. Send me a list of what you want via email and we can do you a quote.

@inactive67 5 жыл бұрын

I would agree with the HDIY that its 6mm as y'all are not from the USA which means its not AWG.. You might have to do some trial an error depending on the tools dies, rope and what its intended use is but its always doable.