How to Use a IMAX B6 Lipo Battery Charger

Рет қаралды 52,773

Күн бұрын

Check out our Lipo Battery Pack here!
www.frontlinefoam.com/product...
► Fully-Assembled Nerf Blasters: Assembled Blasters - Frontline Foam
► Hardware, DIY and Print Kits: Kits & Hardware - Frontline Foam
►Sidearms & Pistols: Sidearms/Pistols - Frontline Foam
► Tactical Gear & Apparel: Tactical/Apparel - Frontline Foam
►Free STL File Download: Free STL File Download
►Blaster Build Guides: Build Guides
►Blaster Overviews: Blaster Overviews
►High-Powered Nerf Gameplay: High-Powered Nerf Gameplay
►Hardware & Maintenance: Hardware and Maintenance
►Frontline Foam's Blasters on KZfaq: Nerf Blasters on KZfaq from Frontline Foam
►FACEBOOK: Frontline Foam
►INSTAGRAM: / frontlinefoam
►REDDIT: Frontline Foam (u/frontlinefoam) - Reddit
►EMAIL: support@frontlinefoam.com
Frontline Foam is a hobby shop in Provo, Utah, dedicated to making aftermarket nerf more accessible to the nerf hobby. If you're looking for a specialized, custom, 3D-printed blaster or parts, Frontline Foam is for you.
The shop is run by 10 employees who build each and every blaster by hand. The videos you see on our channel are often filmed in the very shop where we build and test your blasters. All blaster designs are produced with designer permission, and often collaboration.
Frontline Foam was started by Derrikk Sun, who says his passion for building nerf blasters over the past 12 years has accidentally overblown into a small and rapidly growing business.
We believe that nerf is not only just for fun, but can be a healthy outlet for stress contributing to serious mental health issues. We stand by mental health awareness & effective recovery efforts.
We aspire to be an asset in the nerf hobby and our communities in general to improve people's lives through fun.

Пікірлер: 65

@FrontlineFoamBlasters 2 жыл бұрын

Check out our Lip Battery Pack here! www.frontlinefoam.com/product/imax-b6-lipo-battery-charger/

@tommynewman6376 7 күн бұрын

I was quite nervous about using the lipo charger! This was super helpful. Thank you

@jorgen5788 10 ай бұрын

this video was a great demonstration!

@ryankimura312 6 ай бұрын

Great instructions!

@rcocm 6 ай бұрын

Great video. Thanks for the help!

@sircabs09 Ай бұрын

Very helpful, thought my lipo was damaged during shipping, it was just very low in voltage.. thank you for the hack..

@matthewhall7976 Жыл бұрын

What if your battery doesn't seem to weaken in sound it just stops firing when it runs low on power?.. Because my nuprol 11.1v battery doesn't sound like it gets weaker it just seems to stop working when it gets weak/dead..

@wardzriek6413 4 ай бұрын

good job man

@hoemanch0w 2 күн бұрын

Great viedo To the point All the right Info N0t 20 minutes long Thank you Cheers

@z3centurion277 7 ай бұрын

Hi im gonna buy the IMAX B6 soon, and im wondering if the titan Li-ion is gonna work out of the box with this charger? A dean plug is included

@itzjsh. 2 жыл бұрын

helpful vid

@mainstay. 2 жыл бұрын

Excellent, just need to ad the PSA for 'Storage' i.e after gameplay and putting the LIPo to bed safely.

@lukeodell8188 5 ай бұрын

Just change the setting to storage charge, and I always charge for storage at 1.0amp.

@kclazygaming8543 9 ай бұрын

Awesome!

@royalmail7 5 ай бұрын

Thank you

@DanielCValot 2 ай бұрын

How do you discharge? I just bought this for discharge only

@thanhvan5814 2 жыл бұрын

what is the name of pete's blue shotgun in the video not long ago

@cemiclesbox1531 Ай бұрын

Thanks!

@PeteSack-vg1gg 9 ай бұрын

How do I reset the whole charger memory. I had LiPo selected and started my settings and now I can get it to go back into LiPo and it is stuck in LiIo.

@Venaber Жыл бұрын

thank you

@MegaTarantulas 6 ай бұрын

After starting charging the battery the display stops showing info, gives a signal and shows only just black rectangles. What can it be?

@pakistanimomingermany8385 4 ай бұрын

Hello I want to know how to see on this charger how much mah the lipo has .??

@Dale2 5 ай бұрын

Is there a way to check the state of a battery to know if it's charged or not? (Yeah my battery management isn't great)

@mesh147 Ай бұрын

Thanks bro

@Bao_baogod69 5 ай бұрын

How much Volts do you usually need for an airsoft gun

@leeeeni 7 ай бұрын

i have 1450 mah batteries, do i set to 1.4 or 1.5?

@frankmaddalenajr5721 2 ай бұрын

How do I know when the battery is fully charged?

@jcasey2309 7 ай бұрын

I purchased this charger but didn’t realize it didn’t come with a power supply…. Anyone have a link to one that is compatible??

@RESARU09 7 ай бұрын

hi, the A on my charger always get low went my battery are almost full.. just set for 2.2A but its get low to 0.1A.. help me pls..

@dgmenace73 Ай бұрын

Thanks for taking the time to share this. Something I have yet to have someone explain, under the battery voltage (while charging) is what I think is the capacity of the battery but I have never seen mine show a capacity even close to the capacity of my lipo pack I'm charging. Is it supposed to show the capacity of the lipo battery pack in total? Any information will definitely be appreciated. Thanks

@karoljabonski4320 Жыл бұрын

Hi, I have a weird battery with only balance wires. Is it possible to charge it with this charger?

@brandonbentley5453 8 ай бұрын

I'm going to assume yes. Get the V2 of this charger. It's a very versatile and safe charger(V2).

@eliargumedo4728 6 ай бұрын

You charge your battery until it goes back to normal votlage right? Like how long do we charge the battery

@InaMopar 5 ай бұрын

Until it about 3.3volts x number of cells is the voltage to stop and change to lipo

@aminebenraouda7795 11 ай бұрын

Thank you soo much dude for your time , i already killed 2 lipo batterie 😂, so am learning, i have ( 450mah / 100c / 3s / 11.4 / 5.13w ) what should i do to charge it ? I already buy the same charger b6

@wk713 8 ай бұрын

Set lipo balance/ 0.5/3s lipo 11.1v

@aminebenraouda7795 7 ай бұрын

@@wk713 thanks man , i set it on 0.7 , i think it's fine

@pogoshorts6770 Жыл бұрын

Do I put it to 5.2a since it’s a 3s 5200mah ?

@osopenowsstudio9175 11 ай бұрын

Yes

@VR46Monster Ай бұрын

you can use NIMH just so you get peak voltage over what you need.. 1s 3.7V.. so charge it just to something between 3.2-4.2 and switch between charging modes really fast.... it takes a minute until the voltage, calms down to thze actual voltage. i aint electrician, i just know it works for me and i know that if i let it run longer than minute on NIMH i would forget its on wrong setting and had to deal with fire anyway

@chrispfeif5552 Жыл бұрын

what is the charge counter on the bottom right corner of display? anything to note or write down?

@FrontlineFoamBlasters Жыл бұрын

It’s charged capacity. Not super noteworthy imo.

@chrispfeif5552 Жыл бұрын

@Frontline Foam thanks for that. i have another question.... I'm trying to balance charge a powerbank, the cells are in parallel with 3.7v each, 20 000 mAh capacity. do i desolder them and charge at 1C ? I was aiming for half 1C since the Imax is 6amp max, and that is super high. much appreciated!

@FrontlineFoamBlasters Жыл бұрын

@@chrispfeif5552 you should be able to charge at less than 6amps. I believe the lowest is 0.1amps. You’ll probably want to charge @3.7v or less and a low amperage, but the amperage really only determines how fast it will charge, so that’d be up to you.

@chrispfeif5552 Жыл бұрын

@Frontline Foam thanks bud, appreciated!

@scappellos Жыл бұрын

there is a way to turn it off or I just need to unplug it?

@FrontlineFoamBlasters Жыл бұрын

Just unplug

@stuntxl5783 2 жыл бұрын

How do you know when it's fully charged?

@FrontlineFoamBlasters 2 жыл бұрын

Battery charger auto shuts off and beeps at you

@matthewhall7976 Жыл бұрын

@@FrontlineFoamBlasters that's good to know, thank you..

@cobrakilleridis2650 2 ай бұрын

If I'm not mistaken there is no a high voltage charging, right?

@justken1337 2 күн бұрын

Nope

@gavin9873 2 ай бұрын

I am looking for a way to test the capacity of my 18v power tool batteries can this device do that

@justken1337 2 күн бұрын

I guess it theoretically could (in 5s Li-Ion mode) if you managed to jury rig the connectors. The balance lead on the charger is JST-XH, but I've no idea how you'd go about wiring that to the batteries. Would be best to just get a dedicated device for your use case and not play around with potential lithium fire hazards.

@gavin9873 2 күн бұрын

@justken1337 agreed..I found something else that will do the job I need..thanks