How To Use A Servo With Raspberry Pi Pico
Рет қаралды 19,305
Күн бұрын🔗 The full guide : core-electronics.com.au/guide...
In this guide, we'll learn how a Servo works, the difference between a Positional Servo and Continous Rotation Servo , how to use a Servo with a *Raspberry Pi Pico*, and what to consider when choosing a Servo.
🔧🔨🧰 Hardware featured in this guide:
Feetech FS90 180 degree Servo:
core-electronics.com.au/catal...
Feetech FS90R Continous Rotation Servo:
core-electronics.com.au/catal...
Raspberry Pi Pico:
core-electronics.com.au/catal...
Robot Arm
core-electronics.com.au/catal...
Servos:
core-electronics.com.au/compo...
💡❓ If you have any questions about this content or want to share a project you're working on head over to our maker forum: coreelec.io/forum
0:00 Intro
0:40 How a Servo Works
1:23 Positional Servos vs. Continous Rotation Servos
2:03 Connecting a Servo to a Raspberry Pi Pico
2:44 Installing MicroPython-servo library
3:34 Using a Positional Servo with the Pico
6:40 Using a Continous Rotation Servo with the Pico
9:36 What to Consider when Choosing a Servo
11:27 Conclusion
🌏🦘 Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:
• Raspberry Pi core-electronics.com.au/raspb...
• Arduino core-electronics.com.au/ardui...
• Sparkfun core-electronics.com.au/brand...
• Adafruit core-electronics.com.au/brand...
• Pololu core-electronics.com.au/brand...
• DFRobot core-electronics.com.au/brand...
The following trademarks are owned by Core Electronics Pty Ltd:
"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo
@mathavan5919 3 ай бұрын
Thank you so much bro
@Danster575 4 ай бұрын
My idle want that i install a module named machine but first i dont know why and second thing is that when i want to install it i receved a error message Can you help me please
@natashasmith7182 7 ай бұрын
Is it normal for the range to be less than 180 degrees, around 160 or so? Is there a calibration process?
@Core-Electronics 7 ай бұрын
Some servos may have more or less range, check the data sheet of your servo model to see what it is, 160 sounds like a weird number though 🤔
@mannahfarmandforge5225 Жыл бұрын
Hi I'm trying to follow along but in Thornny I cannot find "Micropython servo" package. Any pointers?
@santanukumarpatra2073 2 ай бұрын
it"s micropython-servo
@btigenie 7 ай бұрын
Following code line by line and when I get to run, I get an error saying "no module named 'machine'". It is a requirement of micropython-servo .... what package or plug-in is it?
@comical24 5 ай бұрын
have you got micropython installed on your pico? if not, go to the bottom-right part of thonny and click "install micropython". go through the needful and whatnot, then the machine library should work!
@pcc404 4 ай бұрын
o-ooh i thought rotational servos could be positional
@richardcafe7757 8 ай бұрын
Guide, what guide? Go to where? You're forgetting you're teaching novices. 🤦♂️
@Core-Electronics 8 ай бұрын
Hi Richard, it's in the first line in the description.
@richardcafe7757 8 ай бұрын
@@Core-Electronics Hi, sorry. I'm an amateur model maker trying to get battleship turrets to turn and elevate and I've ended up in an electronic and programming nightmare😱😁 Thanks, I'll re watch it.👍
@Core-Electronics 8 ай бұрын
No worries mate, sounds like a fun project 👍
@richardcafe7757 8 ай бұрын
After my initial outburst (from my frustration rather than anything you had or hadn't done, once again my apologies) I have to say I found your coding, description and explanations very easy to follow and I now understand a heck of a lot more than I did yesterday. Thank you.👍 Could you do or have you done a follow up to this vid covering running two or more servos doing independent movements simultaneously? That would certainly be of great help. Thanks again.
Andreas Spiess
Рет қаралды 174 М.