How to Use a Tumbler Press for Tumblers and Mugs
Рет қаралды 146,699
Күн бұрынAre you ready to dive in and learn how to use a tumbler press? The press I am using can be used for a variety of tumblers as well as mugs. I am going to show you how to set up the press and use it to make some 20 oz skinny tumblers. Plus, I will share some of the benefits as well as drawbacks to this type of press. If you have wondered about purchasing a tumbler press, this is the video that you need! Already bought a press for tumblers? Watch this video to see how to use it correctly!
NOTE: This mug press was given to me free of charge, however, all projects and opinions are my own.
Supplies used (affiliate links):
Tumbler press amzn.to/3fMC1lP
Heat resistant gloves amzn.to/3bfvjm8
Heat resistant mat shrsl.com/2ny7t Use code CCC10 for 10% off
Sublimation printer - NOTE I am using an Epson EcoTank Printer (I have the ET-4700 and here it is on Amazon amzn.to/3pEKbjX and from Target rstyle.me/+LIrULy_3cQICP14IfS... - NOTE: Any EcoTank Printer should work with these same steps.)
Sublimation paper amzn.to/2USUmGl (Get 50% off the sublimation paper through August 2021! Just click this link and follow the instructions! store.hiipoo.com/pages/angie-... )
Sublimation ink amzn.to/3ioaMjE
Heat resistant tape amzn.to/37wLmcE
Protective paper shrsl.com/2ny7q Use code CCC10 for 10% off
Glow in the dark tumbler amzn.to/3jD3A23
Heat changing tumbler amzn.to/3fIYvUr
UV color changing tumbler amzn.to/2VB4EuS
Lint roller
Tumbler with handle amzn.to/2VIIlTV
Other videos you may enjoy:
Cricut Mug Press with Tumblers • Cricut Mug Press: Mugs...
Mug Press vs. Oven • Cricut Mug Press Versu...
Be sure to follow me on social as well!
Instagram / countrychiccottage
Facebook / countrychiccottage
Cricut Facebook group / cricutlove
TikTok / countrychiccottage
Got a Cricut machine?
Join our free 7 day Cricut class: www.thecountrychiccottage.net...
Join our Cricut community on Facebook: / cricutlove
#tumblerpress #sublimation #sublimationtumblers
0:00 Introduction
0:48 Size restrictions
2:20 Full wrap instructions
3:08 Supplies needed
5:35 Tumbler press components
6:15 Adjusting the pressure/size
8:06 How to set time/temperature
10:08 Preparing your tumbler
15:21 Pressing a tumbler
22:03 Adjusting for other tumblers
22:45 Adjusting for mugs
23:59 Pressing a mug
25:15 Skinny tumblers variety
26:26 Comparison to Cricut Mug Press
28:55 Wrap up
@HollyMiller1958 2 жыл бұрын
After spending a collective 20 something hours searching for a 30 oz mug press you have FINALLY sealed my decision!!! TY for the great tutorial and supply list. hopefully I will be as successful as you were :)
@billladson2511 2 жыл бұрын
I love you showcasing this. I love my PYD Life tumbler press for 2up mugs and the tumblers!
@Junebug3519 2 жыл бұрын
I purchased a variation of this tumbler press in April and I absolutely love it! Ir is super easy to set and it does a fantastic job of sublimating. Now if it would just anticipate user errors before the occur! Thank you for all your awesome videos.
@AngieHolden 2 жыл бұрын
I totally agree!
@LorraineCastellon-Rowe 3 жыл бұрын
Great tutorial. Seems like the press is pretty awesome. Great choice of you don't want a convection oven. Thank you very much Angie!! 💐🌸🏵🌼🌺💖💐🌸🏵🌼🌺💖
@Luxinda 3 жыл бұрын
I recently got a tumbler press and love it so far! But I’m still watching every video I can find, and really appreciate yours!! Very clear and helpful - thanks!
@AngieHolden 3 жыл бұрын
Awesome! Thank you!
@deborahknapp5524 10 ай бұрын
What kind did you get?
@Luxinda 10 ай бұрын
@@deborahknapp5524 great question - I can’t answer because I’ve actually forgotten. I went back and looked at some videos I made about it, and I wouldn’t even list the company name because their customer service was awful. However, I did end up getting a much smaller one recently that I really like, it’s called a Hitprex.
@MrsMonzel 2 жыл бұрын
I just got mine today and it worked great however the settings are a bit confusing but I'm just as happy 😁. I been watching your videos nonstop and enjoy every one!
@AngieHolden 2 жыл бұрын
Great to hear!
@SLRoth 2 жыл бұрын
How has yours held up after 3 months of use? Thinking of getting one, but the reviews on Amazon aren't that great for it.
@lorrainefox6774 2 жыл бұрын
This was a very helpful video, thank you!!
@jmoss55ish 2 жыл бұрын
Hi Angie, I was given this press today as a GIFT!!!
@AngieHolden 2 жыл бұрын
So lucky!!
@INTLEVA 3 жыл бұрын
Thank you as always! Was just looking for a 20oz and 30oz tumbler press
@AngieHolden 3 жыл бұрын
Perfect!
@rosedew25 2 жыл бұрын
I have the same tumbler press and love it. Less spending or no spending extra on shrink wrap.
@RainorShine1 2 жыл бұрын
No matter what I do I still get ghosting. Shrink wrap tape around the cup ect. Still ghosting ugh. Will this press help with that?
@knowyourworld-kyw8140 2 жыл бұрын
Supperbb 👏 i have been watching your videos for quite some time and I am taken away by your efforts. Thanks a lot dear
@AngieHolden 2 жыл бұрын
It's my pleasure!
@abbiebabie77 6 ай бұрын
Thank you for your video, I have a different press than the ones in the video but this really helped me out. I did realize I didn't have any parchment paper & had to use copy paper but my first cup came out great!
@AngieHolden 6 ай бұрын
Glad it was helpful!
@rebeccacook9167 Жыл бұрын
Great Videos! you cover all the details thank you!
@morenag.7769 2 жыл бұрын
Omg! I’m so glad I found you! I’m new to all of this. You are a lifesaver!!! Btw I subbed! 🙏🏽❤️😊
@AngieHolden 2 жыл бұрын
Welcome!
@CheBesDesignBox 2 жыл бұрын
Love your videos. Very thorough and love the technical details you provide. I just purchased a similar mug press from Heat Press Nation. It comes with different attachments for various size mugs and tumblers. There is even an attachment for a shot glass.
@candigirrl003 2 жыл бұрын
A shot glass u say, oh I'm getting one then.🥰🤑
@bezdek3505 Жыл бұрын
Angie thank you so much for the review.
@teresamasek104 3 жыл бұрын
Thanks Angie for this video, it was awesome
@AngieHolden 3 жыл бұрын
You're so welcome!
@carlabrown2957 3 жыл бұрын
Great video Angie! Thank you! ❤️❤️
@AngieHolden 3 жыл бұрын
Thanks for watching!
@tammygrimshaw1844 2 жыл бұрын
Thank you for your video's. I wish I could find the tumbler press here in Australia.
@librarymarna 2 жыл бұрын
Finally got my hands on the PYD Life tumbler Press from your link. They had 2 versions so I chose the V3 which is the updated version of the one you showcased in this video. I couldn't be happier and it printer a sublimation mug perfectly the first time out following all of your directions. Now onto tumblers. Thank you so much for this video and for encouraging us to try this. I had already sent another brand back to the supplier as I had wasted so many blanks so I am a very happy PYD Life customer!!
@AngieHolden 2 жыл бұрын
Yay! Happy to help!
@lauracooper4877 2 жыл бұрын
I have that same press but have had a terrible time with my edges! the middle presses great but the edges come out uneven. did you have this issue?
@librarymarna 2 жыл бұрын
@@lauracooper4877 I have not had any heating issues with 2 mugs at a time or my tumblers. I do make a half turn after pressing and then press again with the tumblers just like Angie did on her video. They all come put perfectly. Sorry you are having issues. Very frustrating as I had to return another tumbler press from another company because of this kind of issue.
@lisayoung3737 2 жыл бұрын
@@lauracooper4877 Yes me too !!! Can't afford too ruin any more tumblers. Have you figured it out yet ? Thank You
@lauracooper4877 2 жыл бұрын
@@lisayoung3737 not yet unfortunately, but I also haven't had time to really play with it. I'm really only having issues with the 30 Oz, which are longer. Recently i read in the pyd life manual that due to how the heating element is inside, the last 1/2 inch or so on left and right (can't remember the exact measurement) doesn't get as hot, so I figure I probably need to do more rotations and press each end longer. Hope that makes sense!
@cathyrarden8073 Жыл бұрын
Thank you, very informative!
@will_graham Жыл бұрын
This was amazing and very comprehebsive youre awesome angie tha k you
@lori-jocarroll 2 жыл бұрын
Great information. Thank You❣️
@AngieHolden 2 жыл бұрын
Thanks for watching!
@Mewtwo1774 Жыл бұрын
Cool now I want one 🤩
@philmatoph 2 жыл бұрын
great video
@lymariperezandino4463 3 жыл бұрын
Great video THANKS 😉✨
@AngieHolden 3 жыл бұрын
Thanks for watching!
@gerrywolfe2549 Жыл бұрын
Great video. Thanks for all the tips.
@mikeandkitgrabowski1542 Жыл бұрын
Would LOVE to see a video how to do the Stanley dupes
@AngieHolden Жыл бұрын
I have been working on them so stay tuned!
@Truecrimequeen68 3 жыл бұрын
You would think you shouldn't have to rotate it. Great job 👏
@jenselle2933 2 жыл бұрын
I was thinking the same thing.
@papamrk1343 2 жыл бұрын
First off, I LOVE YOUR VIDEOS!! Question: Can you ADD an image to a tumbler/mug that you had already sublimated?
@AngieHolden 2 жыл бұрын
You can sublimate again but it gets tricky. It can fade your first image.
@RBLACKPEARL7 3 жыл бұрын
My Next machine yes
@kimberleymorse5 2 жыл бұрын
I just purchased this tumbler press. I have one I purchased in China and it came with 0 directions, and can not get it to work. 🙏 This one will work for me too. I will let you know how it goes.❤️ Thank you so much for your videos I believe I will soon be able to do successfully because of your guidance.
@AngieHolden 2 жыл бұрын
Sorry to hear that!
@Lobesanft 2 жыл бұрын
I´ve been looking for that or a similar tumbler press here in Germany but unfortunately it´s impossible to get one with (at least within the EU) about the size of the described one on the video. Therefore I ordered as an alternativ machine the VEVOR 6800 from GB (which isn´t EU either) with is completely closed and can sublimate tumblers up to 28 cm (11") height and almost 10 cm in diameter (almost 4 inch). The only disadvantage I realized so far is the fact that You cannot sublimate any cans oder tumblers or mugs with any plastic parts attached, ´cause it goes completely into the machine with all parts heated up to the desired temperature.
@albinsalguero6300 2 жыл бұрын
hi, I just ordered this machine I get it tomorrow. Have you ever used a laser engraver you should try one out you are very creative I am sure you would make cool things with it.
@AngieHolden 2 жыл бұрын
I have not. Just no time to do anything else.
@sherrywatson7347 3 жыл бұрын
Am I the only one who finds the settings panel complicated and confusing? Also, the fact that there’s no beep or indicating sound that the time has elapsed sends warning bells (ironic, huh?) that over processing is going to happen. I’m not sure what that would do to your project but it doesn’t fill me with confidence that I would be successful 🥺. I’m also concerned that a manual adjustment is necessary for different sized mugs or tumblers. I’m thinking this press is much too complex for me (a very occasional crafter) therefore, I think I’ll stick with the Cricut mug press. Thank you for the demo of the tumbler press. It was very informative and you saved me some money. Again, thank you.
@AngieHolden 3 жыл бұрын
Definitely all things to consider! Which is why I mentioned each of them!
@virginiarector4376 2 жыл бұрын
@@AngieHolden And everything that you mentioned was much appreciated, especially for the reasons that the other person mentioned. Everyone is def different and what is complicated for some, might not be for others. I did not see any of if being complexed, but I def would want an alarm when it is done, because as a mom, we can get busy or distracted very easily :). Thank you for a wonderful description.
@jenniferbaker515 2 жыл бұрын
Do you know how to calibrate the big press
@lisawhite9725 2 жыл бұрын
Hi Angie, how is this tumbler press still working for you? How does it hold the heat and have you had any issues at all with it? Thank you! ❤️
@wendyhayes240 2 жыл бұрын
Do you have a video for a tumbler press vs the double door oven by Oster. Also have you ever use the water method to cool the tumbler down a little.
@AngieHolden 2 жыл бұрын
I have a video comparing the mug press to an oven: kzfaq.info/get/bejne/qc14aqurvLjNZ5c.html and I don't cool my tumblers at all.
@lizgonzalez4781 2 жыл бұрын
What tumblers would work well with the Cricut mug press? I just ordered mine and would love to make some as gifts!!
@AngieHolden 2 жыл бұрын
Try this: kzfaq.info/get/bejne/jN5dopZ8zdqZj4U.html
@cindymartinez1335 Жыл бұрын
Can you do a tutorial on how to mirror and resizing the prints to fit different items?TIA
@AngieHolden Жыл бұрын
Try this: kzfaq.info/get/bejne/ocydrdV908nLmJ8.html
@mariebibeyron3137 2 жыл бұрын
I was wondering if i take the cricut???
@elviramancilla7289 2 жыл бұрын
Great video! I'm barely starting looking into doing this as a business. Quick question: what printer do you use to print these prints for sublimation? I need all the help I can get! TIA
@AngieHolden 2 жыл бұрын
I have a converted Epson EcoTank as well as an Epson F170. I have videos on both of them.
@coilycrafty 2 жыл бұрын
Great video! What kind of camera do you use?
@AngieHolden 2 жыл бұрын
I use a Canon DSLR.
@lillipadgiftsinc 2 жыл бұрын
Angie, Do you know what each of the letters mean in the settings? Are they supposed to be set on anything specific? Or do we only need to use the cTr choice?
@AngieHolden 2 жыл бұрын
I don't know what each of those mean. I left them on the defaults.
@allisonwalker4441 2 жыл бұрын
Do you have a video on the designing sublimation image? I’m struggling in that area.
@AngieHolden 2 жыл бұрын
Try this: kzfaq.info/get/bejne/iq2Rn8tnxsi6Yas.html&lc=UgzCe-b4XFuoF143T614AaABAg
@kellymong5265 Жыл бұрын
Hi Angie, just received my Ecotank printer after 2 years of watching your videos!!! Now I'm looking for a mug/tumbler press. Can you recommend a good one that won't break my bank?? I'm wanting to start a small business but moving very slow, I want to make one time purchases and not panic. Your videos have given me the courage to take the leap!! TIA for any help you can offer.
@AngieHolden Жыл бұрын
I do like the tumbler presses from PYD life.
@Mfleclerc 2 жыл бұрын
Thank you so much for your video. I have an Elite Tumbler Heat Press, but I think it would be the same. Can we use Cricut Infusible Ink Transfer Sheet? My first items will be the skinny 12 oz wine tumblers.
@AngieHolden 2 жыл бұрын
Yes you can use Infusible Ink!
@Mfleclerc 2 жыл бұрын
@@AngieHolden awesome! Thank you for quick reply
@rameyj2 3 жыл бұрын
Love the video , I went through it a few times . When I get to the end to set temp it goes to 5P. The out does not light up. Do you have any idea what I may of done wrong. Machine just in today.
@AngieHolden 3 жыл бұрын
I am not sure?
@Slag1980 2 жыл бұрын
Jackie..did you figured that out? I am having the same issue😢 Thanks
@tabathasteele7547 2 жыл бұрын
are you going to show doing the other size tumblers like the 30oz?
@AngieHolden 2 жыл бұрын
It would be the same procedure for each different size. You can do many sizes in this press so I definitely cannot show them all.
@annnerren9370 2 жыл бұрын
I just purchased my tumbler press and when I press my tumbler. The first 2 tumblers I had to much pressure and I bent the tumblers LOL! I wish I would of saw this video before. Very informative! The paper also stuck to the tumbler and I had to use water to wash it off. I press at 365 for 70 seconds. I have the HPNation signature tumbler press that is there recommendations for pressing tumblers. Can you please tell me why my Paper is sticking and pulling off the white sublimation off the cup. HELP I want to be successful craft! 🤦♀😭😭😭
@AngieHolden 2 жыл бұрын
I would try adjusting the pressure. You may have too much and pushing the paper in.
@leeandaudreyroberts7006 2 жыл бұрын
Do you need to do anything to the tumblers after your done? Like coat them with anything or are they just good to go after pressing, and ok to wash and not destroy the project. New and watching videos before I start.
@AngieHolden 2 жыл бұрын
Sublimation is permanent as soon as you press and ready to wash.
@vidhividhi7638 2 жыл бұрын
Hi. I am new with tumblerpress and never used before. Can you let me know do we Need sublimation printer and print on sublimation paper everytime. If yes, is there a cheaper option
@AngieHolden 2 жыл бұрын
Try this: kzfaq.info/get/bejne/Y8xkoqtj3ZOypWQ.html
@michellecunningham2254 2 жыл бұрын
The pyd press is sold out :( Can u recommend a similar one? Thank you for this video!! I definitely want one!!
@AngieHolden 2 жыл бұрын
Sorry! Hopefully they will restock soon!!
@myhawaii00 3 жыл бұрын
what program do you use to print the designs on
@AngieHolden 3 жыл бұрын
Try this: kzfaq.info/get/bejne/iq2Rn8tnxsi6Yas.html
@savorthesweets830 2 жыл бұрын
Any tips on wrapping cafe mugs. The have a weird curve/shape. Like latte mug
@AngieHolden 2 жыл бұрын
I have not made any of those!
@lynnewman8382 2 жыл бұрын
Hi, PYD Life has 2 different mug presses. The one you're demonstrating is the V2.0. There's also a V3.0. Is there a difference besides the price? Thank you
@AngieHolden 2 жыл бұрын
They did send me some information and it looks like they did change some things but I have not used the other one.
@jenselle2933 2 жыл бұрын
Angie is there a reason that you need to rotate? If the press fits all the way around the tumbler.
@AngieHolden 2 жыл бұрын
It SORT OF fits all the way around. There is a small gap at the top. I feel like rotating is safe to make sure you get a good print.
@veronicajuarez3684 2 жыл бұрын
Hi! Do you think I can do sublimation on the new glass can 12 Ana’s 16 oz?
@AngieHolden 2 жыл бұрын
They should work but I haven't tried them yet.
@yangm916 2 жыл бұрын
Does the PYD Press cause a smell? Because I watched another video where another crafter stated that with the convectional oven, it gave off a chemical smell and the Cricut press does not. She used a different press and when she pressed it smelled a little. Did you have any problems with it giving off a chemical odor?
@AngieHolden 2 жыл бұрын
All sublimation gives off some odor. The convection oven is a bit worse as the smell is basically trapped until you open the door. The Cricut press as well as this one gives off some odor during the process. I recommend opening a window in your craft area.
@justinivancovich8053 2 жыл бұрын
Question. We are using the same pyd press. 350-50-50 and keep getting a pinkish result on all of our tumblers. Some have said either to hot or to long. Using A-sub ink and paper.
@AngieHolden 2 жыл бұрын
350 is probably not hot enough. Check with the instructions for the tumbler you bought.
@debraplumley4831 2 жыл бұрын
When I was reading the manual it says 400/60 seconds but I notice you did 360/50 seconds and twice. Did you lower to compensate not burning so you can turn it?
@AngieHolden 2 жыл бұрын
I always get my time and temperature from the sublimation blank. The manual just gives you a general idea for all tumblers but to be more specific you will want to check on your blank.
@ninascraftypants 3 жыл бұрын
It would be great to get this in Ireland!! Can you find out if they deliver to Ireland or can I still buy from the US use an adapter plug!
@pydlifeamazon1121 3 жыл бұрын
Could you please leave us your contact email or phone number? We can provide you the Europe Plug,and send you directly.
@ninascraftypants 3 жыл бұрын
@@pydlifeamazon1121 can you tell me your email as I can’t put it on here👍🏻
@AngieHolden 3 жыл бұрын
I would definitely contact them as they should be able to take care of you!
@allisonwalker4441 2 жыл бұрын
What brand is your tape dispenser? I’m having trouble finding one that fits my heat tape.
@AngieHolden 2 жыл бұрын
I actually just found a new one on Amazon that I am testing!
@msmetrice 2 жыл бұрын
Can you use shrink wrap instead of paper for protection??..
@AngieHolden 2 жыл бұрын
I think that would just be more expensive? I wouldn't recommend it.
@prestonsworld1011 2 жыл бұрын
Do you recommend the PYD tumbler press? I'm deciding between this one and the Heat Press Nation tumbler press. Are you still using the PYD press?
@AngieHolden 2 жыл бұрын
I am still using this one and I do like it.
@Brineytoes 2 жыл бұрын
Where can I get the glow in the dark ghost paper please? I don’t see a link for it.
@AngieHolden 2 жыл бұрын
It is a glow in the dark tumbler then I put the sublimation print on it.
@allisongraham1159 2 жыл бұрын
I recently started working with the tumbler press and am having issues with the top&bottom not being as dark as the rest of the cup.. I’ve tried adjusting the pressure and it’s still doing it. I’ve been doing 360/ 50 seconds and then turn and do another 50. Any ideas?
@AngieHolden 2 жыл бұрын
My guess would be you need a higher temperature perhaps.
@just.x.marissa 2 жыл бұрын
Can you do this with a regular HP printer? Or do I have to use that specific paper for it? Great tutorial!
@AngieHolden 2 жыл бұрын
You have to have a sublimation printer with sublimation ink.
@just.x.marissa 2 жыл бұрын
@@AngieHolden thank you!
@kimberleymorse5 2 жыл бұрын
Epson printers take sublimation ink.
@murphylaw2436 3 жыл бұрын
What do all of the red abbreviations mean on the display ?
@AngieHolden 3 жыл бұрын
I did not look up what each of those changed! I was just worried about temp settings!
@tiffaneywilson7032 Жыл бұрын
I just bought this press. I'm having major issues getting my tops to look good. I keep getting white spots with no ink. After watching your video, I don't think I'm using enough pressure. I'm going to tighten the pressure and make a tumbler tomorrow. Hopefully that fixes my issue.
@tiffaneywilson7032 Жыл бұрын
I adjusted the pressure and that did not help. I'm returning the press and sticking with my convention oven. My oven gives me perfect tops and bottoms.
@AngieHolden Жыл бұрын
Hmmm....Sorry about that. I have not had an issue.
@yvonnebrown1779 2 жыл бұрын
Hi since I have a tumbler press would it be ok to use shrink wrap so I know the image is snug to the tumbler
@AngieHolden 2 жыл бұрын
I have not ever used it as you don't have to with a press.
@jessicaflores462 2 жыл бұрын
I’m looking into buying a tumbler/mug heat press and have been looking at reviews however I was going to buy this one but they are currently unavailable 😭 any suggestions on the next best tumbler/mug heat press??
@AngieHolden 2 жыл бұрын
I only have this one and the Cricut Mug Press so I don't have other advice.
@josephinejacobs2159 2 жыл бұрын
Have you sublimated in an air fryer/confection oven?
@AngieHolden 2 жыл бұрын
I see you found my video on this!
@BlakeTheFutureShow 2 жыл бұрын
Hi Angie, can you use infusible ink from cricut for this Tumbler and Mugs press machine even though it says sublimation?
@AngieHolden 2 жыл бұрын
Yes, absolutely
@BlakeTheFutureShow 2 жыл бұрын
@@AngieHolden duly noted. Now, I can buy it. Thanks
@sherryprince5856 2 жыл бұрын
I really like this tumbler press I am in Canada and on Amazon its not available can you recommend how and were to purchase one?
@AngieHolden 2 жыл бұрын
Sorry. I am not sure!
@SassybyDesign3732 2 жыл бұрын
I have this heat press…can you use the glass tumbler/cans in this heat press?
@AngieHolden 2 жыл бұрын
Yes you can! I am reviewing another one too....using the glass tumblers! It will be up soon!
@digitus78 2 жыл бұрын
How do you not get a missing space/white line around the rim and bottom with a press?
@AngieHolden 2 жыл бұрын
For the rim, I run it all the way up and leave some extra. The bottom is trickier. I like to find a place to stop it so yes there it a white line there. If you don't want that, then you would extend the print and tape down really well.
@connieohenley2234 Жыл бұрын
Can this press be adjusted to cone shaped (wider on the top, skinnier on the bottom) mugs and tumblers?
@AngieHolden Жыл бұрын
You would have to get one that would take those types of inserts most likely.
@kattiaesixx 2 жыл бұрын
Angie i hope you are well! question for a sub business what you will like better this machine or convection oven?
@AngieHolden 2 жыл бұрын
For a business, a press is definitely easier and quicker. However, the oven will do a wider variety of shapes and sizes.
@kattiaesixx 2 жыл бұрын
@@AngieHolden ty for your time and advise
@bigrndahouse 2 жыл бұрын
And do not put a single mug in the middle. It will not get enough pressure to sublimate correctly. If anything have a spare mug and put it on the other side if you have just one mug. This worked for me.
@AngieHolden 2 жыл бұрын
Oh good tip! Thanks! I have only ever used it for two!
@bigrndahouse 2 жыл бұрын
@@AngieHolden Thank you for your in-depth videos! Very much appreciated.
@RainorShine1 2 жыл бұрын
Where or how to get the ghost glow in the dark? What product did you get to glow in the dark paper?
@AngieHolden 2 жыл бұрын
The sublimation tumbler itself was a glow in the dark tumbler. I just pressed the ghost image to it.
@yvonnebrown1779 2 жыл бұрын
hi I know I asked before about heat temp the lady I bought my tumblers from said she does 315 another lady asked told me 400 I did the 400 came out a little too speckled but good so I see you do 356 what blanks company do you use I know you said the temp goes by the blank manufacturer please help sorry to be a pain also I like how in your vid you don't wrap the top just tape for security awesome
@AngieHolden 2 жыл бұрын
These are PYD life blanks.
@zindelvazquez2954 Жыл бұрын
Do you leave the access at the top without taping it? The sublimation paper itself I mean.
@AngieHolden Жыл бұрын
I had some tape at the top but not as much.
@rhondap1014 2 жыл бұрын
What kind of paper are you wrapping around?
@AngieHolden 2 жыл бұрын
First the sublimation paper then protective paper. Linked in description.
@cakkyblue 2 жыл бұрын
Are Butcher paper and freezer paper the same?
@AngieHolden 2 жыл бұрын
NO! Freezer paper is way different!
@jmoss55ish 2 жыл бұрын
Did I miss what the dimensions for the sublimated paper is for the tumblers?
@AngieHolden 2 жыл бұрын
You need to look up a template for the tumbler you purchase.
@clairechamberlain5807 3 жыл бұрын
How does it glow if you covered the whole thing?
@AngieHolden 3 жыл бұрын
I left the white ghosts which will not be covered.
@Lillyscraftsandgifts 2 жыл бұрын
Can you add permanent vinyl to a sublimation tumbler even though is says tumbler for sublimation?
@AngieHolden 2 жыл бұрын
Yes you can!
@Lillyscraftsandgifts 2 жыл бұрын
Thank you for your response. I love your channel
@intuitivebynature.1985 2 жыл бұрын
I have a Wala 8 in 1 press, can I press tumblers with it?
@AngieHolden 2 жыл бұрын
Maybe? Not sure of the size of the mug portion of that one.
@tracyishealing911 Жыл бұрын
Is it correct to say that if you want to sublimate on tapered or rounded drinkware you must use an oven?
@AngieHolden Жыл бұрын
There are some tumbler presses that come with coils for tapered items but they would be very specific. I find it easier to just do that type of thing in my oven and not try to buy more accessories for the press.
@tracijesienouski5976 10 ай бұрын
What program do you use to get the correct size to print? I'm having trouble doing it on design space
@AngieHolden 10 ай бұрын
Try this: kzfaq.info/get/bejne/ocydrdV908nLmJ8.html
@cindymartinez1335 Жыл бұрын
How do you mirror and resize the images for the tumblers? TIA
@AngieHolden Жыл бұрын
Try this: kzfaq.info/get/bejne/ocydrdV908nLmJ8.html
@blanchelee5680 2 жыл бұрын
Looking g for a tumbler press can anyone tell me the price if this particular one please and thank u
@AngieHolden 2 жыл бұрын
Link to this one is in the description for this video.
@heathermizell1195 2 жыл бұрын
does it matter if you using a different heat press? or they are the same temp?
@AngieHolden 2 жыл бұрын
Generally the same but you may have to experiment. An oven would be different.
@mariebibeyron3137 2 жыл бұрын
Hello possible to have them on 220 voltage french...
@AngieHolden 2 жыл бұрын
I am not sure.
@jeosmomm0611 2 жыл бұрын
So Im still using an oven until my press arrives. Im hoping you can answer this question. My tumblers all come out beautiful except on the seam. I always have fading along it. I cant for the life of me figure out why. Any suggestions?
@AngieHolden 2 жыл бұрын
My guess would be you need more tape down that area as it isn't tight enough. Are you using shrink wrap around them?
@denniss7805 2 жыл бұрын
Hello, what weight an brand paper do you use if you don’t mind me asking
@AngieHolden 2 жыл бұрын
Try this: kzfaq.info/get/bejne/q92eeN2pntzDo4U.html
@dlilly4053 Жыл бұрын
My tumblers are showing tape lines using this press. (Never had them when I used an oven) Any thoughts?? I've tried tightening the press and loosening it without improvement.
@AngieHolden Жыл бұрын
I have NEVER had this issue and have had many people say the same thing. The only thing I can guess is the brand of tumbler and the coating applied.
@CharlyPacheco Жыл бұрын
Hi .. I order these one Do you think I made a good choice I want to do the tumblers Mugs and glass
@AngieHolden Жыл бұрын
I love mine!
@trinadorcheus1719 2 жыл бұрын
Is your protective paper parchment paper.
@AngieHolden 2 жыл бұрын
NO it isn't. Try this: kzfaq.info/get/bejne/sNh1hcZenrjed3k.html
Silhouette School with Melissa Viscount
Рет қаралды 211 М.
Jennifer Maker
Рет қаралды 75 М.
Katrina's Graceful Creations
Рет қаралды 240 М.
Christy Cain - Appalachian Home Co.
Рет қаралды 17 М.
Katrina's Graceful Creations
Рет қаралды 10 М.
Vu Ngoc Son
Рет қаралды 16 МЛН