How to use an adjustable wrench properly

Рет қаралды 7,404

Ай бұрын

How to use an adjustable wrench properly.
#wisemanautomotive #automobile #mechanicsecrets #mechanic #goodinfo #diy #adjustablewrench #wrench #car #nut #bolt #bolts #boltsnuts #boltz #nutz #nutsandbolts #tool #tools #toolreview #secret #safety #safetyfirst #autotech #automotivetechnician

Пікірлер: 21

@charlesfields7908 Ай бұрын

No no not its not an adjustable wrench it's a sweetish nut lathe, universal hammer, universal pry bar 🤣

@minus3dbintheteens60 Ай бұрын

You're all wrong, it's a shifter

@Wizard__J Ай бұрын

Crazy, if people are using tools, _but don’t know how to use them_ maybe they _shouldn’t be using them_ lol. Nonetheless, thanks for the video. I’m sure there’s someone out there who can find this helpful 🎉🎉

@jeffwiseman0286 Ай бұрын

Great point! Thanks for the comment

@jonpaul1981 Ай бұрын

Just remember Everyone starts out NOT knowing how to use tools.😊

@jeffwiseman0286 Ай бұрын

@@jonpaul1981correct you are. It’s one reason I make my videos. I hope I can help everyone out from beginner to novice.

@TuRaTic Ай бұрын

The only thing i havent used ths for is driving screws. Its not good for anything, it is however just enough to fuck up pretty much anything

@jeffwiseman0286 Ай бұрын

😂

@alastairdow4400 Ай бұрын

Its called a crescent

@michaelsly267 Ай бұрын

Thank you!

@jeffwiseman0286 Ай бұрын

You're welcome! Thanks for watching and commenting, it really helps me out.

@mikepowell4122 Ай бұрын

Well, unfortunately, there’s pressure on both sides of the wrench

@jeffwiseman0286 Ай бұрын

Yes but doing it backwards will greatly increase your chances of slipping off

@andreitorok8887 Ай бұрын

@jeffwiseman0286 One could argue that is incorect.. considering physics the pressures on the two arms of the wrench will be equal or negligible different for our debate so when you use it the “right way” you put pressure on the tip of the moving part but when you use it the “wrong way” you put that pressure on the base of the moving part so considering that moving part a lever and considering that the base of the moving part is more thicker than the tip, you will have a higher chance to break it using the “right way” than the “wrong way”…

@andreitorok8887 Ай бұрын

Regarding the slipping off situation it shoud not be the case if: 1. your adjustable wrench is not rounded at the contact points whith the nut at which point you should not use it anymore as a wrench, 2. if you hold it right in jour hand and attached well to the nut and 3. if you adjust it right to the size of the nut.

@jeffwiseman0286 Ай бұрын

Well I’ll tell you this, having logged in over 20 years in the trades, my knuckles will agree with this video lol

@andreitorok8887 Ай бұрын

@@jeffwiseman0286good argument.. you should at least consider physics and common sense though. Have a nice day

@minus3dbintheteens60 Ай бұрын

You shouldn't own one, then youll never be stuck using one

@user-xi7se3tc7p Ай бұрын

Yes I agree however what happens after a while is you find yourself modifying a proper spanner. I.e grinding away at it. I have several 'special' spanners like that😨

@minus3dbintheteens60 Ай бұрын

I have only had to cut up my very oldest crapest spare spanners or wrenches at the ring end for hydraulic lines like brake and clutch, I really only work on cars, engines etc.. What types of tool mods do you make?

@user-xi7se3tc7p Ай бұрын

Mainly specific bicycle tools. Thin spanner's,just made a special bottom bracket removal tool. Didn't look pretty but very effective,you can buy these tools but generally come in a kit that's expensive and the tools aren't good quality so saved a couple of hundred £ for half hour work on the lathe and a chunk of aluminium