How To Use Arturia BeatStep Pro with Bluffmunkey - 03

How To Use Arturia BeatStep Pro with Bluffmunkey - 03 - Synths and Final Comments

Рет қаралды 28,102

4 жыл бұрын

Watch more courses here: www.sonicacademy.com/
In this short new hardware 'How To Use' course Bluffmunkey is back with us once again and checking out Arturia's BeatStep Pro.
With two independent melodic sequencers and a drum sequencer, you can take full control of soft synths in your DAW, analog and digital instruments and drum machines all at once giving you that sought after 'hands-on' performance-related experience.
Over these few short videos, Bluffmunkey runs through how to get up and running with this innovative bit of kit so go check it out!
Connect with Sonic Academy:
_________________________________________
Website: www.sonicacademy.com
Facebook: / sonicacademy
Instagram: / sonicacademy
Twitter: / sonicacademy

Пікірлер: 28

@organism-7915 3 жыл бұрын

You can expand the steps by holding shift and the arrows. It will copy your current sequence across all 64 steps.

@hermansimms8410 3 жыл бұрын

You are a bloody genius. You don't talk to fast and you give a great lesson in using the beatstep pro

@nooneinparticular6014 4 жыл бұрын

There really needs to be more videos about this device.

@Spludgeroo 2 жыл бұрын

I wasn't going to watch this series because I don't use a Bluffmonkey. Then I watched it to find out what a Bluffmonkey is and do I need one. It worked out in the end. Very good vids. Thanks.

@MeneerSpijker 4 жыл бұрын

Very clear introduction! Thanks

@garryvee 4 жыл бұрын

This is a great introduction. Thank you.

@phillindablank 3 жыл бұрын

this is actually a great demonstration

@sonicacademy 3 жыл бұрын

Thank you

@Raggo12345 3 жыл бұрын

Brilliant review! Best review on the Beatstep so far! Have just bought one. :) Will use it to control VST-synths in a DAW, :o which might sound strange. (It's just until modules are being bought.)

@DiegoFuego87 4 жыл бұрын

A cool follow up video would be to show how you can extend the beatstep with all of the midi functionality in ableton

@DrDefJake 4 жыл бұрын

Pro tip - you can use a headphone splitter to hook up both midi dongles from the midi out jack to set up this way without having to buy a more expensive midi din splitter.

@sonicacademy 4 жыл бұрын

Thanks for this!!

@aleksrutar8839 3 жыл бұрын

You made my day, i was just thinking i need to buy a midi splitter soon :D

@organism-7915 3 жыл бұрын

Hey! I’m using this method of linking up a ms-20, Minilogue XD, and Roland JD-xi. I’ve managed to sequence them separately, for some reason the Minilogue randomly triggers random notes that aren’t in my sequence. I’ve tried a lot of different things to fix this, so now I’m wondering if you have any suggestions on possible fixes??

@eirikolsnes 2 жыл бұрын

@@organism-7915 A bit late, but yeah. Using more than 2 devices with this method tends to be glitchy. I run the MS20 from cv outputs - after changing V/Oct setting (and a few more maybe) in beatstep config. Works well :) Btw: 2 reasons for glitches.. Headphone splitter usually has built in balancer of some sort. Also, splitting "current sink" breaks midi specs, or something like that :)

@RepublicAllegiance 4 жыл бұрын

Your timing is great. Can you do a tutorial on using the drum sequencer as a polyphonic sequencer? #DawlessNoob

@rendermanpro 4 жыл бұрын

Thanks A LOT!

@kostantinosmag2986 2 жыл бұрын

Nice video

@je7647 2 жыл бұрын

Good videos, found other people's videos on the BSP much harder to digest

@DiegoFuego87 4 жыл бұрын

Which setting allows you to preview the note pitch as you turn the sequencer dial? I didn’t know that was possible on the beatstep. Great video, super clear and nice overview of the features. Watched this as a bit of refresher after not having the BSP in my set up for quite a while and was really helpful.

@rennnnnnnnnnnnn 2 жыл бұрын

I'm wondering this exact same thing. Mine doesn't preview like that either, but that would be super useful.

@elyot4010 3 жыл бұрын

Question: How did you set up the D to receive midi channel 16?

@dubcotics 3 жыл бұрын

Why do I hear sound of my synth or drum machine when I hit play tho none of the pad is selected. to a sound?

@ove1312 4 жыл бұрын

Hi,i have a little problem with my Beatstep and a Spectralis MK1. I am trying to set it up so i can play on SEQ1 my synth and on SEQ2 a VST. The problem is: If i set midi channel 16 in beastep pro and try to set up a vst in ableton on midi ch 16 it triggers the sound from Spectralis.Do i need to buy a kenton midi thu box or i just need to change the settings in midi control center ?

@noisevector 4 жыл бұрын

I think you have both synths listening on channel 16 than? Change 1 synth to listen on a different channel.