For those of you that have asked how to leave a tip to help the channel out. You can do it by clicking on the Super Thanks button under the video. Thanks for checking us out, hope our videos have helped to save you money! Have a great day!
@GaryGrube1 Жыл бұрын
Always turn the Multiport Valve handle in the same direction. Hayward recommends clockwise to make it easy to remember which direction you are using and to do it the same every time you move the valve handle.. Turning the handle back and forth can damage the valve gasket or cause it to wear out faster. So, if you always turn the valve handle in the recommended clockwise direction; when it is set to, "Waste", don't turn it backwards (counter clockwise) to, "Filter". Turn it from, "Waste", clockwise all the way back around to, "Filter". Again this is per the Hayward rep. Also, when my pool equipment was installed, the pool techs emphasized this to me when they were showing me how to operate the equipment.
@HomeOwnerRepair Жыл бұрын
Thanks for the added tip!
@Santaripaz Жыл бұрын
Exactly what I was looking for. As a swede, we're generally blessed with good manuals when we buy things (IKEA!), but the pump i bought contained just about zero instructions. So thank you very much for posting this!
@HomeOwnerRepair Жыл бұрын
Glad I could help!
@Jillian1stJohn3-9-102 жыл бұрын
Oh no! Yesterday the pool supply store wrote down some basic instructions for us to clean a pool that hasn't been used in 6 years. Today I noticed that the water was really low, so I just found your video, and I realized that I used the handle as the dial!!!
@HomeOwnerRepair2 жыл бұрын
Thanks for watching
@HomeOwnerRepair5 жыл бұрын
In The Swim Pool Product Offer: $10 off orders $75 or more! Enter Code: I8AFFP10 at checkout Shop Here: intheswim.7eer.net/c/26179/633057/1935?sharedid=HomeownerRepair
@justinalexander10565 жыл бұрын
Homeowner Repair im cleaning my pool, adding alkalinity plus and poolside turbo shock, should I keep my Hayward in the filter setting, thanks.
@jimbo56356 жыл бұрын
Its important to push the handle fully down before turning it. There is a gaskets under there that can be damaged if redirection plate is dragged across it. I never heard of only turning it one direction and I have rebuilt a lot of theses, I can't think why it would matter.
@HomeOwnerRepair Жыл бұрын
Thanks for the added tip!
@soulie12063 жыл бұрын
I was always told to go clockwise for the settings.
@eternalabyzz93862 жыл бұрын
Ye me too
@edlingja12 жыл бұрын
Irrelevant, it’s a spring loaded plug. Turn pump off and pull handle as far down as you can so you don’t drag the gasket around causing damage when you turn it. One direction vs another doesn’t change how it lifts or rotates.
@HomeOwnerRepair Жыл бұрын
Thanks for watching
@sparkythedetroitdoggo82813 жыл бұрын
This is exactly what I needed to know . Thanks for posting !
@HomeOwnerRepair3 жыл бұрын
Glad it was helpful!
@toddburton14916 жыл бұрын
Important thing is to not move the valve with the pump running.
@lukebaker36333 жыл бұрын
Is the true? This is what I came here to find out... How come it seems designed to be able to change on the fly
@lisaheeter38103 жыл бұрын
@@lukebaker3633 i always switch mine while running 🤷♀️ 4 yrs now no problems. (Except for closed or winter of course) But to backwash or recirculation i nvr stop pump.
@sjmunoz3 жыл бұрын
i dont undesrtand why they recommend it. i have never stopped the pump while switching the valves 13 years now, same filter, same pump. no problemo.
@normt4303 жыл бұрын
That plus only clockwise direction, not counter clockwise.
@bobfrankfurt94493 жыл бұрын
@@sjmunoz could you tell me what the PSI gauge supposed to read? I just moved into a new home and my first time pool. Gauge is at around 4-5 psi and doesn't move. What is this gauge used for?
@maxine25602 жыл бұрын
Thanku! hubbys in hospital and the pools gone green. So i did extra filters, and now ill backwash a bit, then rinse a bit. Then go back to normal filtering and hope we dont get frogs by the time he comes home
@HomeOwnerRepair2 жыл бұрын
Hope he feels better. Hope this video also helps you out. If the pool is green you may have to shock the pool to kill the algae. Once it turns white you can work on clearing it up. Once you clear it up try this product it's called Pool RX, I used it last year and my water was awesome never turned green or cloudy once it works well. Here is a link to it, hope this helps out amzn.to/3hgv6BD
@TheLisabronte6 ай бұрын
Legend! One of the best videos I've seen. Easy to follow and bite size.
@HomeOwnerRepair6 ай бұрын
Thank you for watching out video that explains the settings on a swimming pool filter. Have a great day!
@blurayffan663 жыл бұрын
Very helpful- thank you. Greetings from Alicante, Spain.
@HomeOwnerRepair3 жыл бұрын
Glad you enjoyed it!
@user-yv4iz3hx8v2 жыл бұрын
Thank you. I appreciate it you're direct and concise "get directly to the point" presentation. Point: you excluded what the 'close valve' is used for . How do I use the 'close valve?'
@edlingja12 жыл бұрын
You use that for making repairs if there is a potential for a leak which will damage your glue operation. It’s just there because they can put it in, could be helpful for an above ground where the equipment is below the water level- although you need a valve at the skimmer anyways so it is irrelevant.
@HomeOwnerRepair Жыл бұрын
Glad it was helpful!
@dumphreysmcgeerr58937 жыл бұрын
Thanks man! New to pool and this helped understanding the Hayward 👍
@HomeOwnerRepair Жыл бұрын
Thanks for watching!
@tinybrownin2 жыл бұрын
Thank You for this video. I’ve been learning my Grama’s pool to help her take care of it. 💙
@HomeOwnerRepair2 жыл бұрын
Glad it was helpful!
@user-yv4iz3hx8v2 жыл бұрын
I noticed you missed 'Close.' What is the 'close valve' used for. I sooo appreciated you concise, direct presentation. I wanted to learn about the haywood exact pump you showed,
@HomeOwnerRepair Жыл бұрын
To stop the flow of water through the filter.
@theocline90762 жыл бұрын
Ur video was very informational as a pool owner
@theocline90762 жыл бұрын
Thank you
@HomeOwnerRepair Жыл бұрын
Thanks for checking us out.
@HomeOwnerRepair7 жыл бұрын
Remember to subscribe to our channel to receive all of our coolest updates!
@jyum446 жыл бұрын
HomeOwnerRepair.
@marywynn-ball566 жыл бұрын
How to network two computers using windows 10
@soniafinn59126 жыл бұрын
HomeownerRepa
@PROGamerSavageIsaic5 жыл бұрын
What do you put on while vaccuming
@marilynwylie68696 жыл бұрын
fantastic. We have that same valve and our description on top has finally worn off and can't read so now I can play this and get used to where and what all valves are for. Thanks a bunch for this video
@HomeOwnerRepair6 жыл бұрын
You’re welcome. Glad this helped you out
@theblakefamily39915 жыл бұрын
You can get a new sticker for it at a pool supply store or Amazon. Pool supply was cheaper for me. They are made way better than my original label was.
@skyforce21323 жыл бұрын
This is so much better than cartridge filter!!
@HomeOwnerRepair3 жыл бұрын
The sand is awesome
@cynthiaarmstrong7972 Жыл бұрын
Closed? That’s the one setting that I needed to know about. Please explain. Thanks
@HomeOwnerRepair Жыл бұрын
This position can be used top the flow of water into the pool filter.
@chrish40792 ай бұрын
I kept waiting for you to talk about the closed setting and you never did. Or did I miss that? I'm looking for a setting that will allow me to work on the pump without the water from the pool draining back through the filter and flooding me. I don't suppose 'closed' will do that?
@grapplerguy20076 жыл бұрын
Mistake dont turn it back only go clock wise. Will tear up valve gasket.
@gileadlane5 жыл бұрын
That's what we thought too..
@1kaboobie4 жыл бұрын
I made that mistake unfourtunately! I also need to change the valve out completely.
@mafilters76954 жыл бұрын
Yes you are right
@mafilters76954 жыл бұрын
Ken coup
@edlingja12 жыл бұрын
Incorrect. The plug lifts vertically, the gaskets are made to last but they will wear out anyways. The direction of rotation has nothing to do with gasket wear.
@shermasealy6022 жыл бұрын
My pump doesn’t have a waste setting, what should I do?
@HomeOwnerRepair Жыл бұрын
What other settings does it have, and what are you trying to do.
@MrC55ps10 ай бұрын
THANKS. The markings have faded away on my filter. I thought you turn it just clockwise. You turned it both ways ... is that OK?
@HomeOwnerRepair10 ай бұрын
You want to turn it in one direction, I would turn it clockwise.
@sls64176 жыл бұрын
You forgot to mention the 'close' setting. The one I was waiting for.
@k.holland70116 жыл бұрын
Same here
@topfunko73365 жыл бұрын
It just closes the valve
@Executiveranch5 жыл бұрын
This setting is only used when servicing the pool pump. Never run the pump with the valve in the ‘Closed’ position.
@HomeOwnerRepair Жыл бұрын
Sorry just saw this. Looks like your question may have been answered
@alexrex38803 жыл бұрын
Nice and short video . Easy to understand! Good job. Thx
@HomeOwnerRepair Жыл бұрын
Glad it was helpful!
@michaelmontalbano50833 жыл бұрын
Thanks for the post. It was made very simple.
@HomeOwnerRepair3 жыл бұрын
Glad it helped
@davewinship18264 жыл бұрын
Thank you my friend, well done!
@HomeOwnerRepair4 жыл бұрын
Thanks for watching. Hope this helped you out.
@paulneale98810 ай бұрын
Great video and your explanations were very were very easy to follow. I've had my pool and my Hayward filter since 2008. Other than some of the names wearing off, the filter is doing it's job with no issues. Now, is there a 'rule of thumb' out there of when you should change out your filter and multiport for a new one, or keep rocking with the old one? Thanks Paul
@HomeOwnerRepair10 ай бұрын
I would use the old one until it fails.
@edwardmcewen6 жыл бұрын
Thanks for posting!
@HomeOwnerRepair Жыл бұрын
Hope this helped you out
@johnreynolds67983 жыл бұрын
thank you brilliant for a NOT HANDYMAN John
@HomeOwnerRepair3 жыл бұрын
No problem John. Have a great holiday season!
@asapodg19353 жыл бұрын
God bless you ...I've learnt a lot ...
@HomeOwnerRepair3 жыл бұрын
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
@rmtrout6545 Жыл бұрын
Does closed totally close the system so I can open my filter without losing pool water? You didn't mention close. It may be a simple question, but it would be nice to have included it.
@HomeOwnerRepair Жыл бұрын
It just closes the valve. You will still loose water out of the filter if you take it off.
@shawnrock53224 жыл бұрын
Thanks that really helped me out a lot real easy to understand
@HomeOwnerRepair4 жыл бұрын
Glad it helped!
@dennistaylor45486 жыл бұрын
Very informative....thanks a mil.
@HomeOwnerRepair Жыл бұрын
Thanks for watching
@susiejones5673 Жыл бұрын
How do I know which setting I'm on.On the top there is no markings on what it is on?
@HomeOwnerRepair Жыл бұрын
You may have to look up the manufacturer, or shut the pump off and turn the valve, turn on and see what setting you are on then mark the valve accordingly.
@SheilaSteMarie Жыл бұрын
I believe I ruined the gasket if it is a white plastic. Do I need to get that replaced asap
@HomeOwnerRepair Жыл бұрын
If there is a damaged gasket it should be replaced.
@alicia121ful2 ай бұрын
How can you figure out the settings if the words have been faded completely way by the sun?
@beckyswag0988Ай бұрын
I had the same problem with my filter and you can buy a label to go on top of your filter.They are pretty cheap from amazon.
@cliffnash10263 жыл бұрын
I need to have the valve setting on circulate unless I am backwashing or something to that nature correct
@HomeOwnerRepair3 жыл бұрын
It should be on filter to filter the pool water. Circulate will bypass the filter and just circulates the pool water.
@fav18904 жыл бұрын
Thank you very much for this information bro
@HomeOwnerRepair4 жыл бұрын
No problem
@coopdawg2 жыл бұрын
thanks for the video, great content... what setting do I put it on for cleaning the pool manually with the hose?
@HomeOwnerRepair2 жыл бұрын
I typically use the filter setting.
@stuartmarshall70992 жыл бұрын
If I have air in my pump which setting should I use to get air out as I see there in no air bleed valve?
@edlingja12 жыл бұрын
The air is probably coming from the suction lines but if your lines are good then occasionally you can get air trapped in the filter dial head. If so, you generally turn pump off, use recirculate for a few mins, turn pump off again, back to filter. If you are still getting air in the system you can plug the waste line temporarily to see if air is sneaking past the internal gasket on the dial head and causing the pump to not prime completely full (replace it if it is).
@HomeOwnerRepair Жыл бұрын
Thanks for the tip!
@hannahbruns3482 Жыл бұрын
how do you take the filter out of this pump to check it?
@HomeOwnerRepair Жыл бұрын
Are you trying to remove the filter valve off of the tub with the sand in it?
@grassvalleydudes Жыл бұрын
many thanks!
@HomeOwnerRepair Жыл бұрын
You're welcome.
@swade46902 жыл бұрын
Which setting would you use to leave it running on all day
@warriorgamingyt56552 жыл бұрын
Filter
@HomeOwnerRepair Жыл бұрын
Filter
@kathydouglas65934 жыл бұрын
My dial settings are wrong. Backwash is filtering and vice versa. Help please. Can i have installed wrong?
@HomeOwnerRepair4 жыл бұрын
Hi Kathy, See if the hoses are possibly connected to the filter the wrong way. The hose opening on the filter market inlet should connect to the skimmer, and the outlet marked return should be connected to the return outlet in the pool. Hope this helps out.
@peted76877 жыл бұрын
Thank you that helped
@HomeOwnerRepair7 жыл бұрын
Thanks for watching
@Samsung-py9mu5 жыл бұрын
When you do the vacuum your pool where is is volve setting sposed to be? I am new to the pool need help.i have same system
@HomeOwnerRepair5 жыл бұрын
It should be on the filter setting. Hope this helps you out.
@Samsung-py9mu5 жыл бұрын
@@HomeOwnerRepair Filter position thnx for reply. But this setting .return water line making my pool green nasty again on filter setting.water going thru sand and going back to the pool . Algae going thru from vaccum to the filter and coming back mixing in the water same vaccum time
@dumpsterdivingqponqueen94995 жыл бұрын
@@HomeOwnerRepair then u want to vacuum on waste or backwash but try do it quick as u will be losing water and will need add some fresh water back
@sdfaucette4 жыл бұрын
Samsung 4 I used to have this happen also. Would vacuum and get everything out of my pool only to turn it on and all the green came out of my jets. I learned that if you have any algae or actually even after a couple of weeks of cleaning. You need to backwash to clean out sand , then turn off pump and put it on rinse for a few minutes. Until you see clear water in that little bubble 👍🏻 Hope that helps.
@MrSshagster3 жыл бұрын
Always turn the handle clockwise
@HomeOwnerRepair Жыл бұрын
Thanks for the added tip!
@jbabe3282 Жыл бұрын
I got a drain plug for motor. Inground pool.when i tighten to much it gets loose again. Brand new plug. Is that normal?
@HomeOwnerRepair Жыл бұрын
No, The hole might be stripped.
@jbabe3282 Жыл бұрын
@@HomeOwnerRepair fixed with Teflon tape
@johnbradford12914 жыл бұрын
Thanks, really helped.
@HomeOwnerRepair4 жыл бұрын
Thanks for watching, glad this has helped you out
@WhatwhatBE Жыл бұрын
My filter is leaking water from the waste outlet when I put it in the filter setting, can anyone explain why? Should I just put a plug on the outlet when not in use?
@HomeOwnerRepair10 ай бұрын
The valve might be starting to go on it.
@mayraalfaro6622 жыл бұрын
I’m looking for someone to tell me where the on and off switch is on this pump please.
@HomeOwnerRepair2 жыл бұрын
There more than likely isn't one. It is supposed to we wired to a dedicated circuit with a GFI outlet and also a switch to cut power to the outlet.
@carolcuccia35375 жыл бұрын
this year, i used it on filter, and now i put it to backwash, and stopped and went back to filter, but water is still coming out of the backwash spout
@HomeOwnerRepair5 жыл бұрын
Make sure nothing is preventing the selector from seating into the top of the housing correctly
@jepoytv6125 ай бұрын
Thanks for info
@HomeOwnerRepair5 ай бұрын
Welcome
@hypefuego64143 жыл бұрын
how do you bleed air out of this type of filter ?
@garysicurella923 жыл бұрын
I wish I knew
@HomeOwnerRepair3 жыл бұрын
I typically shut the filter off and then push down on the valve handle to purge the trapped air out. You may want to check the o-rings and hose clamps to see what may be letting the air in.
@thejeremypost3416 жыл бұрын
I heard it was a bad idea to move your filter valve back and forth. I was told you should always try to go in the same direction ie. Clockwise/counter clockwise. Is this true, or is it just garbage talk? Thanks.
@HomeOwnerRepair6 жыл бұрын
I’m not sure. I have never heard of this
@TheParksnfl6 жыл бұрын
I was told the same thing... Always go clockwise. Not sure if this is true but this is what I was told.
@arthurwalton52556 жыл бұрын
The Jeremy Post Always rotate the setting handle in the same clockwise direction.
@dawhoda16 жыл бұрын
Not sure about that but I sure know that moving it into different settings while pump is running isn't the smartest idea 💡 😂
@gracesmith44346 жыл бұрын
I was told to make sure your pump is turned off and be sure to press down your lever and then turn it to your setting in a clockwise Direction
@johnp.delaura60087 жыл бұрын
Good video, thanks
@HomeOwnerRepair7 жыл бұрын
Hope this helped you out.
@TimdogQ6 жыл бұрын
Thanks, Sitch!
@HomeOwnerRepair Жыл бұрын
Thanks for watching
@pattyhicks1343 жыл бұрын
How do you put on a new dial. I'm trying to replace same exact one. Took off old one and put new one on but where all the screws are there is water spraying out. Is it not right enough. LOST!!! HELP PLEASE ASAP!?!?!?!?
@HomeOwnerRepair3 жыл бұрын
The screws holding the valve assembly collar should be tightened the same amount at the same time.
@alexandersauceda77375 жыл бұрын
Thank you so much for the info
@HomeOwnerRepair5 жыл бұрын
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
@vikeyjain48362 жыл бұрын
I want to do vaccum ..throght the vaschum head...where should I set the multiport setting in waste or in rinse...pls reply urgently ..I am getting frustrated ...I have a personal pool....I am not getting the setting for vaccumig the pool throught the vaccum head
@HomeOwnerRepair2 жыл бұрын
I typically vacuum on the filter setting
@truckerjake13 жыл бұрын
Any videos on how to Maintain a pool?
@HomeOwnerRepair3 жыл бұрын
Do you mean with chemicals?
@filmolosophy4 жыл бұрын
Do you have to replace the sand ever?
@HomeOwnerRepair4 жыл бұрын
I typically replace the sand every other year. It does make a difference when you replace it.
@d12duke Жыл бұрын
I am five years late to the video but thank you for the explanation! As a completely novice pool owner with this system, I am experiencing an issue I hope the internet can assist with. I have my pump primed and when I am in any other setting rather than circulation, I have circulation. If I am in circulation, it is the only setting that will not initiate circulation. Is my device damaged or am I being a novice? Edit: Also, if my lever is set to the UP position facing any direction, it will circulate.
@HomeOwnerRepair Жыл бұрын
Sounds like there might be an issue with the valve.
@d12duke Жыл бұрын
@@HomeOwnerRepair I didn't have the plugs out!!!! Hahaha. Again, totally a novice. Now we're in the super chlorination phase trying to reach breakpoint. There's So much more this than I realized!
@SheilaSteMarie Жыл бұрын
Should the valve stay on filtration
@HomeOwnerRepair Жыл бұрын
If you would like to filter the pool under normal operation then yes. The filteration setting will filter the water.
@johnp.delaura60087 жыл бұрын
Good video thanks
@HomeOwnerRepair Жыл бұрын
Thanks for watching
@mariegarcia82972 жыл бұрын
My valve on hayward reads 40? Is this right?
@HomeOwnerRepair Жыл бұрын
Usually filters run between 5-20 Psi
@constancerieck65385 жыл бұрын
What setting do you use when you vacuume the bottom of the pool?
@HomeOwnerRepair5 жыл бұрын
Usually filter, if it’s really bad then waste
@michalejizzed3 жыл бұрын
This is the main question that was not answered in this video ugh
@jillmathes2196 Жыл бұрын
What if my filter does not have waste option what should I use instead.
@justinalexander10565 жыл бұрын
New subscriber ✊🏾
@HomeOwnerRepair5 жыл бұрын
Thanks for subbing the channel!
@janjaf844 Жыл бұрын
Can the pool be drained through pump?
@HomeOwnerRepair Жыл бұрын
You can use it to lower the water level down to the skimmer level.
@ilanassa18395 жыл бұрын
When you open the pool after the winter, which setting should we put it on first. Thank you
@HomeOwnerRepair5 жыл бұрын
I usually run mine on filter and shock the pool to kill and algae
@bobfrankfurt94493 жыл бұрын
@@HomeOwnerRepair could you give me a quick rundown on how you OPEN the pool after winter, as well as rundown on how to WINTERIZE it? First time pool owner with the new house. ty
@AndreasEUR4 жыл бұрын
At the place I'm at, the valve is set to closed. I'm assuming that's not normal for when in operation ? It's even missing a pipe from the skimmer etc..
@HomeOwnerRepair4 жыл бұрын
It should be set to filter when you are tying to filter and clean the pool water.
@AndreasEUR4 жыл бұрын
@@HomeOwnerRepair yeah, I managed to get that airbnb cancelled.. Several things there that didn't sit right with me.. Thanks for the reply.
@bart64692 жыл бұрын
Nice video but there is no vacuum setting?
@HomeOwnerRepair2 жыл бұрын
To vacuum I typically set it to filter
@forged_billions24 жыл бұрын
Do I move valve to a setting then turn pump on?
@HomeOwnerRepair4 жыл бұрын
Yes, anytime you move the valve position you should turn the pool pump off. Hope this helps you out.
@sparky25024 жыл бұрын
after I backwashed and switched back to filter the water comes shooting out the top of the filter . can I run the pump and bypass the filter ( recirculate ) until I get it fixed? I'm thinking maybe the O ring?
@HomeOwnerRepair4 жыл бұрын
You may want to see why it's causing this to happen.
@erinbarberesi75112 жыл бұрын
What setting would I turn it to if I want to clean out my impeller (after turning off the power)?
@HomeOwnerRepair Жыл бұрын
You should be able to put it on the closed setting to stop the flow of water.
@lonetteraycrane46697 жыл бұрын
Thank you.
@HomeOwnerRepair7 жыл бұрын
You're welcome. Hope this helped you out
@mgamga94763 жыл бұрын
When in backwash setting does it backwash it back into the pool?
@HomeOwnerRepair3 жыл бұрын
No it will clean the filter out and come out of the outlet on the valve
@notrondayt95 жыл бұрын
Thanx very helpful
@HomeOwnerRepair5 жыл бұрын
You’re welcome. Hope this helps you out
@walkingthruyourdata-60192 жыл бұрын
awesome thanks!
@HomeOwnerRepair2 жыл бұрын
No problem! Thanks for watching
@amandasturkie3496 жыл бұрын
Can someone please answer my completely ignorant question??? How in the world do I open my filter to check to see if the laterals are not broken without losing pool water??? It is not hard plumbed, so I have no cutoff valve. I'm just wondering how people do any kind of work/maintenance on their filters if all the water is coming out of the pool into it when take the top off?? How in the world do you even replace a hose if need be???? I feel so stupid!
@HomeOwnerRepair6 жыл бұрын
Put a tennis ball in the skimmer to prevent the flow of water from coming out, and then disconnect the return hose into the pool from the filter, leave it connected to the pool and hang the return hose over the edge of the pool wall so that it’s looped and no water flows out
@elisabethpankhurst20165 жыл бұрын
How do I drain the in ground pool for the winter
@benjaminkent43975 жыл бұрын
@@elisabethpankhurst2016 Place handle in the waste position. Make aure if you have a skimmer and bottom drain that the valve is set to lower drain only. Waste the water from the pool and drain your filter system. Be cateful when wasting water on in hround pools if you have a high water table as this may cause your pool to "pop out" due to increased pressure below pool. This goes for liner pools, fiberglass or gunnite. If in doubt contact your local pool pros or the contractor who installed it.
@Seidrskratti4 жыл бұрын
Didn't understand about winter setting... Please help.
@HomeOwnerRepair4 жыл бұрын
The winter setting should be used at the end of the season once all water has been drained from the filter. It props up the valve diverter inside.
@aztecwarrior61382 жыл бұрын
Where should the setting be for normal operation?
@HomeOwnerRepair2 жыл бұрын
Filter
@mrs.robinson-lotus3 жыл бұрын
Omg thank you!
@HomeOwnerRepair3 жыл бұрын
Thanks for watching. Glad this helped you out.
@MellyBenelli Жыл бұрын
What is closed for?
@HomeOwnerRepair Жыл бұрын
It can be used to stop the flow of water into the tank, i.e. if you are maybe trying to change a filter
@zulmuhamad22992 жыл бұрын
Thanks. Now i know
@HomeOwnerRepair2 жыл бұрын
Thanks for watching
@phileubanks28184 жыл бұрын
On the Hayward filter.... What size is the backwash hose that goes on there? 1 and a half or 2in?
@HomeOwnerRepair4 жыл бұрын
Mine was 1 1/2" Just replace a hose last weekend
@phileubanks28184 жыл бұрын
@@HomeOwnerRepair Thank you very much. I did purchase a 1 1/2 yesterday online and looking forward to hooking it up soon. I read that some bust easy but I am hoping I get a good one. Have a great day.
@katiewells24835 жыл бұрын
What setting do I use to get air out of the filter??
@lwangandamase22752 жыл бұрын
I would also like to know
@edlingja12 жыл бұрын
You have a broader problem then. You can power down, switch to recirc. Then run it for 5 mins to see if the bubbles stop in the pool itself. As it runs, monitor the pump basket for incoming air bubbles (this is a result of air entering the system before the pump’s impeller (leak, loose fittings, o-rings, whatever is between the pump suction and the pool outlets).
@HomeOwnerRepair Жыл бұрын
Sorry just saw this. Looks like your question may have been answered
@RT-kh8rg5 жыл бұрын
I got the basic but I have problems finding the differences valve
@HomeOwnerRepair Жыл бұрын
Sorry just saw this question
@BLUEISTHEONE5 жыл бұрын
if i turn to backwash i turn on the pump or not?
@HomeOwnerRepair5 жыл бұрын
Yes the pump should be running so that all of the crud comes out of the filter. Shut the filter off, turn to backwash and then turn the filter back on.
@BLUEISTHEONE5 жыл бұрын
@@HomeOwnerRepair how long can i backwash? thanks for replying
@realmccoy5 жыл бұрын
@@BLUEISTHEONE 1-3 minutes
@normt4303 жыл бұрын
@@BLUEISTHEONE backwash for one minute as you watch the sight glass clear. Then rinse for 30 seconds. You may need to repeat sequence. Remember to turn valve only in clockwise direction.
@kenfox222 жыл бұрын
Great 👍 video but the sound quality could use some improvement
@HomeOwnerRepair2 жыл бұрын
Thanks for watching
@ashleyni26williams262 жыл бұрын
How do I turn it on and off
@HomeOwnerRepair2 жыл бұрын
You should have your pool wired to a grounded outlet dedicated for the pool. There should be a switch on the circuit to turn the pump off.
@LubaLuba14 жыл бұрын
mine has waste settings so whats the difference between waste and backwash
@HomeOwnerRepair3 жыл бұрын
Backwash reverses the flow of water and cleans algae out of the filter sand. Waste by-passes the filter and should be used to vacuum hard to remove algae out of the pool. Hope this helps you out.
@jaimematos7723 жыл бұрын
Can you run the pump on flow setting
@HomeOwnerRepair Жыл бұрын
It should be on filter during normal filtration conditions.
@MrVa3smc5 жыл бұрын
I maintain a pool and do a backwash, then rinse, then back to filter. However what happens when its back on filter and turn pump back on all the dirty water goes through the glass where you can see the quality of water and then it goes out the jets and into a pool. I back washed our pool this morning, it was crystal clear, then after i backwashed the water was cloudy.....should i be doing something differently?
@soleslayer915 жыл бұрын
Yes put it in rinse for 30seconds to a minute after you backwash
@officerkrupke49665 жыл бұрын
The spider gasket under the multiport valve may be defective, causing the backwash water to also go into the pool. Next time you do a backwash, look to see if dirty water is coming out of pool jets.
@edlingja12 жыл бұрын
Backwash 3-5 mins generally, rinse for 30 sec - 1 min. Backwash cleans from the bottom up. Rinse cleans from the top down (very important).
@HomeOwnerRepair Жыл бұрын
Sorry just saw this. Looks like your question may have been answered
@artejchahill56734 жыл бұрын
That was helpful
@HomeOwnerRepair4 жыл бұрын
Thanks for watching
@PatrickCossette4 жыл бұрын
I have a filter which does not have the Recirculate setting, but that has the Whirlpool setting. Are these the same?
@HomeOwnerRepair4 жыл бұрын
No, The Whirlpool setting bypasses the filter and should create a stronger water return flow into the pool.
@PatrickCossette4 жыл бұрын
@@HomeOwnerRepair Thanks!
@lisaheeter38103 жыл бұрын
@@HomeOwnerRepair thats exactly what my recirculation does
@edlingja12 жыл бұрын
Recirculate = whirlpool Also, throw that filter away as soon as you need to it’s not very nice lol
@MarcusAurelius330367 жыл бұрын
I have a hayward system as well. You refer to a sand filter, but mine uses diatomaceous earth instead of sand. How much diatomaceous earth do I have to add back into the system for a +/- 45,000 gallon pool?
@HomeOwnerRepair7 жыл бұрын
I'm not sure,it might say on the side of the filter like mine did
@digger55216 жыл бұрын
DoWhutNow There are some sites that let you work out your pool size by measurements , even kidney shaped www.swimmingpool.com/testing-water/pool-volume-calculator