Since watching your channel I've been trying to incorporate more into my sim-world as you have been using. Another great vid and product..

I've been thinking of getting EZDOC for a while now. Thanks for posting these clear instructions.

Great reference video as i only had ezdok half set up all this time. Your a huge asset to the flight sim community froggle thanks.

You make so much easier to set up rather than me reading and drawing a "Huh?" blank look and auguring in! I really appreciate your efforts and dedication to helping us older and "what does this button do?" fly by trial pilots! Great big like!! :)

Again, a genuine "FROOGLE". Concise information embedded in casual format! Thanks and cheers. Hoping for more to come!

I've been flight simming since the green screen days and have recently purchased the PMDG737NGX. Found your uploads by mistake but so pleased that I did. Love the quality of the video, the information given and a nice touch of humour. Great job, keep it up. Subscribed.

I finally decided to get EZDOK and using it on the PMDG 737NGX. This video was very helpful. thank you.

Great video, I love the way you explain things, very clearer and straight to the point. Thanks for taking the time to help people.

Thank you for the video. I saw your FS Crew video yesterday, then purchased Ezdok, spent 5 hours trying to get exdok to work. Found your video on you tube, within 4 minutes bingo... thanks again

Froogle we need to fly a route!! Thank you mate you have tought me so much ive watched every one of your vids fantastic teacher many thanks ;)

AMAZING video... A million thanks froogle from Jordan!!! Big fan of your work...

Great video. Whenever i tried to set it up, all i got was a headache. Thanks so much for taking the time to show us how it's done. Great stuff.

Thanks for this tutorial, after a while trying, this video finaly covered the main aspects in a effective way, all set to fly now.

IMO best explanation so far. Very concise and to the point, the way it should be done. You should do an advanced EZdok vid.

I think maybe the best (in form of simple) explaining of EZ DOK. Thanks a lot! For sure, with this video you made my descision to buy!

Very nice piece of software. After hearing you mention it today at FlightSimCon, I'm definitely gonna pick this one up.

Brilliant instructional video - thanks Froogle!

thanks for sharing. this is the most clear tutorial I've seen

Thanks Mark, glad you found the videos useful.

Just brilliant. Made setup so much easier. Well done.

Great vid, clearly explained. Everything went with examples. Thank you, Sir!

Froogle. Thank you, that video was fantastic. I've had EZDOK for ages and since getting TrackIR I'd been using that instead of EZDOK. This was a great video on how I can use them together to get the views I want (PIC, radio panel, external views etc.). I'd never really got either add-on to do quite what I wanted in the past. Thanks again.

Great video, extremely informative, and gives us a very good idea of how to use it, and what the features are. I loved your wingtip view!

Thank's for your fantastic tutorials you drive me in to deep simulation.Great job!!!!Go on man :)

Thanks to this video now I know how to use the Ezdoc camera,excelent video in how to use this add on,this made it all easy,thanks.

That was the simplest explanation I've seen. Thanks!

This made complete sense for me as I deny myself the pleasure of reading manuals. Thank-you

Hi Froogle, This is the best vidio on Ezdok I have ever seen...it has helped me to configure my PMDG 737-800....fantasic..thank`s Regard`s Brian.

Helped me loads , I have subbed you and all your videos are brilliant , keep the good videos up :)

Very nice video. I´m now practice this cam setup in my FSX now. Thanks for sharing. Greetings from Brasil. Gilberto Mendes,

Thank you very much, this was the best one I have ever seen.

Thankyou for your reply.Really enjoy your vids

Thanks a Million Excellent Infomercial. My Eyes were Open and The Dummy has Awaken. You Make It Look So Easy and User Friendly. Thanks Again..Must be exhausting for You...But Keep Up The Good News/Work....

Yea after about 2 hours i managed to get it running perfectly thanks a lot ! and its really one of the best add-ons

Awesome tutorial! Thanks a lot. Can't wait to get my sim working like this...

Thank you so much! Finally my EZdok settings are great!

EZDOK is absolutely the best addon for FSX. I feel like I can finally learn how to fly the planes without the hassle of moving around the cockpit with clunky controls. It aldso has the added bonus of serving as a wonderful filming and photography tool. Absolutely brilliant. Unfortunatley it took me a while to get past the bug of creating a new camera with addon planes (no shake once binded to key), but once I figured out I could import an existing camera, then clone it, the problem was solved.

Froogle, master of tutorials.

Thank you so much! This makes EZdok easy to set up.

Pete, Thank you for the great video!

Thanks man! This video really helped :)

Thanks Froog... very helpful...

Such a thorough and yet easy to understand tutorial... Cannot thank you enough! Just one question, how do I get the standard tower views? I use them a lot and can't seem to figure out how to get them back since purchasing and setting up EZdoc.

Thanks froogle your a legend. Will give ez another go now :)

Amazing tutorial, thanks!

thank you froogle because there were many other unhelpful videos out there

Thanks Froogle. 'Great help !!!

Phew!! A bit too quick for me. I have been perplexed by EZDOK for a few years and still haven't cracked it. |I'll need to run this five times to keep up with you. But a great clear speaking voice. Thanks.

Really cool explanation. Thanks

I've tried several times before to do it (and your tutorial is EXCELLENT btw) so maybe Im doing something wrong, but it shouldn't be this hard. Im used to learning more complicated applications than this, and even the DCS sims dont have a dedicated camera app like this but can still get by with simple short cut keys for a free camera, offset camera to the plane ect With this, I always end up with a camera in the middle of the jet and it not saving what I have done. I'll keep tryin..thx!

Clear, concise tutorial. I was waiting for EZdock v2, since even the patch is 2 years old!But may go ahead and get v1.15 and patch it to v1.17. I assume thats your version in the vid? Thanks again for the tutorial.

ty for this video i needed help using my EZdok!

Very nice and usefull video !! Thanks

I do like all your videos. they are really quite helpful. Thank you. I just picked up EZCA and am wondering how you can float around in the cockpit as smoothly as you do in the 3D look as you did in the beginning of this video. I went through all the documentation and didn't really find any good explanation, unless I missed something. I'm going to go over the manual again and check. Again, thanks for all you hard work.

wonderful tutorial, thanks very much!

Thanks! Great video!

Amazing Man well explained hope you pst some advance level tutorials sir

Great mod great video. Thank you.

Very useful, thanks!

Great video Sir it helped me out a lot. One thing though I can not get the camera resonance to work on my wing tip view? Any ideas

How cool is that! Although it looks a bit involved and complicated but do-able.

It really helped. Thanks :)

Thank you my friend helped me alot

Glad you liked it.

Excellent, thank you.

finally know how to setup EZCA! thanks!

Hi Froogle. great tutorial. May I ask what program you are using to record your computer screen and your voice while flying simultaneously? If is FRAPS? If so, how do you do it without the dramatic drop in frame rates?

I have watched a few of your videos now, and they have been both useful and interesting, thanks! Out of interest, what zoom do you use for ezdok in pmdg 777 and airbus extended x?

Great job bro.

Thank you sir Much appreciated.

excellent and useful, thanks.

Great video Froogle....are there any conflicts with A2A's Accufeel turbulence camera settings or Opus FSX camera settings. I assume, you need to use either one or the other (EZdok or OPusFSX)?

At 10:31 it looks like some massive plane out of a movie, the shadow, (which is actually a river), makes it so much better, damn that's awesome.

Just came across your video and it sounds far easier than having to read a bunch of manuals that leads to confusion. I've finally picked up on EZDOK, followed your instructions on unbinding keys, etc. Page up/down works perfectly but every time I try to focus on a particular panel, the view centers me again to the pilot view. Any insights? Thanks in advance!

At least a week away. I have the Sabre in this video to do, plus a written review of a Stearman that I might film, plus the full review of the Coolsky DC-9 and the second mission of the Black Shark, but with human co-pilots. Lots to do. I will try my very very best to get to it. I may even cover the AoA training program for the 737 which I managed to get my grubby mitts on to let you know if it's worth it. OH, and there's a 146 collection to look at.

I like the scenary below the plan....

Cheers. I have them on my extensive wishlist! Because EZDock has the aircraft dynamic effects built in, I was wondering if Accufeel was worth buying?

Thank you sir. Guess what!? The World views are the one part of the app I struggle with. I'll have to dig in and see what can be done.

what a brilliant product. Does it work in other simulations or just in fltsim?

I set up a and shift a to cycle the views, then unbound them in the sim. It's in the ezdoc options menus.

I thought I knew EZCA, but I didn't. Great video. Now ... I have yet to figure out World View, and I'm guessing that's how everyone gets those great video scenes. Any chance of a tiny video on World View?

I needed to see something like this vid to make my mind up on using it, so I'll give it a go, one question though, if you re assign number pad keys, which do you use for reverse thrust on landing if 3 can't be used?

Loverly... I learned a good bit, even having EZDOK's EZCA for a while now...but you forgot to tell us to SAVE!

Finally someone with brain. Thanks m8 :)

Thank You soooo much!!!

When setting up the cameras, click on the PtP button for each camera. This makes them "Point to Point" cameras that will animate when changed.

what a brilliant product :)... does it work with other simulations an all or just with fltsim?

Thank you soo much!

Thank you for these. How do I disable the pan function of the hats though, so I can assign EZOK view positions by hat degrees? It seems to pan even if I disable it in FSX.

Would you use Accu Feel together with EZDOC? Which products' dynamic effects would you rate higher? Also, if you select "float" in aircraft menu, can you float around outside the aircraft and in the viscinity?

Im getting there slowly. Notice how subdued the narration is in the latest Airbus vid.

Thanks man!

I use FSUIPC and bind reverses to the a switch on each throttle. I think you can use F2 as well.

Make sure you are pressing number 2 on the keypad on your computer, not the row of numbers above the letter keys. Make sure that Num Lock is turned on. Beyond that, consult the support forums.

Hi Pete will you be doing any more tutorials for Ezdoc that cover world cameras???

Oh Gawd. You should do a start-up and take off video for this aircraft.

nice video!!! thz! btw when u are showing the key mapping for ezdok u ve got the cycle view section, i hvnt got it.... how did u get it???

You need to set up the views, as in this video, for each and every aircraft. For the transitions, you need to make sure the cameras are set as PTP (Point To Point) to get that floaty effect.

If you put FSX into windowed mode you can just drag the window borders to resize it just like any other application.

You can bind joystick hats to camera movement if you wish.