I’ve been thinking about buying FSUIPC for ages, but never found any good examples of its usage other than on Aerosoft’s shop. I think this is evidence enough for me now, great stuff.

Superb clear speaking voice. The best I've ever come across. Many thanks!! (And no junk noise to prevent me hearing anything!!)

Once again I thank you for your supremely useful vids. This utility really played havock with my dyslexia, until this video. Now I'm a free man and shall never be shackled to just one choice. Absolutely great stuff. Barty

Thanks a lot for all your tutorial videos, Froogle. Much appreciated by the Sim Community.

I still refer to this video when I go and tinker with my settings and mess everything up. Its always good to come back here and learn (remember) how to set things up. Thank you very much.

Thanks for making this tutorial, Froogle! It's very useful and a quick way to learn the FSUIPC interface

I always wondered what you got in the full version I have been struggling with pmdg 737 and a satex yoke for a few days now I see this is the answer thanks froogle

Thanks for another great video Froogle. I was looking for something like this to tune out the deadzone on my yoke in FSX.

Great advice and given in a very easy to listen style. Just what I was looking for!

Great Video, the only one on the youtube that helps you better to understand FSUIPC

Thanks For years I've only used the free version of fsuipc for the simple reason I have never found a video actually telling me what it does and how. You have addressed that Thank you Mike

Merci pour ce tuto ! Super instructif pour les newbies :o) Merry Xmas and a happy NY !

Thanks so much. I've been researching for days and most of the posts suggest I should "go and re-read the user manual". Well that is obvious, but the manual isn't an easy read and your video really helps me confirm if I am doing the steps correctly because suggestions on the Internet can vary. Been a fan for a while, even more so today. Thanks again.

Thanks so Much Froogle! This was much awaited :) thank you so much, you the man!!

Good video, but I have one comment: In order to avoid unwanted effects of known "dead zones", move the levers to their min, then pull back a tad before hitting the "set" button. Do the same for max and the center positions. This will prevent value changes just by having your hand on the levers, and the fact that the max and min values will vary every time you move the levers. A purchased version of FSUIPC is a "must have" for any flight simmer.

I found using the Slope option was a must for the A2A172 when it released. Made a positive difference. FSUIPC is a clever program.

Holy crap brother, you have no idea how you saved me with this video! Thank you.

Wonderfully done and incredibly useful. Thanks!

Thanks Froogle - very useful!! I finally moved to a registered version of FSUIPC and didn't realise the control binding was so useful/customisable. Now using my TM Warthog I can have 2 seperate throttles in the PMDG 737, and also the lift-up idle cutoff buttons work with the reversers now (not possible in FSX standard config, even with full repeat set), and then I can have a different profile in my A2A Spitfire splitting to throttle and prop control etc. Also - now idle in the 737 is 'actually' idle!

Thanks for the excellent video! I needed to buy FSUIPC/WideFS7 several years ago for an add-on, but never knew, or understood it's full potential.

As a saugage fingered, (almost) 68 year old technophobe who can just about cope with the defaultFSX... I only recently found you on utube! as a result of that I have started to download 'add-ons! My first was the A2A Cessna 182... what a shock to the system that is, but I love it! I also down loaded Aerosofts free 'Santa Ana airports' ..and every free second of my life is spent doing circuits and bumps at the John Wayne Airport. One problem... I find great difficulty in 'twiddling the knobs' with the mouse! and I wonder if installing FSUIPC might help in correcting the problem?

Thank you Froogle this really helped :) got money for christmas so i am getting the saitek cessna yoke, orbx PNW region, Rex essentials with OD, a2a c172, and fsuipc4. Just wanted to say thanks because u showed me there is alot more to fsx than i originally thought and now i am hooked :)

Thanks Froogle, You helped me a ton!

FSUIPC 4 definitely the best 28€ i ever spent on FSX. Anyways, great video and nicely explained ! Christmas sales on Simmarket & Co are killing me right now :D

Cant wait to see the XPlane Froogle!

Another useful and awesome video.. Thank you!

You make it sound so easy. Maybe it is when you know what your doing!

Thanks for the vid. This should help with those pesky disconnects. Love your videos.

Thank you for this very useful tutorial!

great, concise and thorough, well done

Hi just to say I am loving your work!

I got FSUIPC and I had no clue what the fuck it is until now

Thank you Froogle !!!!!!

Excellent video there that helped me clear quite a lot of misconceptions about this gem of software...makes quite a difference to the otherwise twitchy and imprecise control movements of joysticks like the Logitech Extreme 3D Pro and Saitek ProFlight Yoke (both of which i own). I only wish you could make this video a little more informative by giving us a rough idea of how much to set the response curves of the pitch, roll and yaw axes for a particular category of aircraft e.g. response curves for a 747 will be quite different from that of a Cessna or an F18 or an Extra 300...is there any recommendation that you can give? Or should they be adjusted based purely on "feel"? Please advise.

Hi Frogglesim. Is the any other chance of doing a more highly detailed FSUIPC tutorial for beginners. So that all setting go through FSUIPC, and show how to make sure settings in FSX are definitely shut of, and how each section in FSUIPC works. Your stuff is just so educational and helpful, such a video would be great

Very helpful, thanks!

Thanks froogle!!

Fantastic info.... I didn't know.

thank for the video on fsuipc, i have no problem with pmdg using fsuipc to coontrolling my throttle, but can not use with the airbus x

Very useful indeed!..thank you :)

Hi buddy ..... this 1 is overall a very informative tutorial. I have connected 3 joysticks to my sim ... of course 1 for flight controls and other 2 for various pushbuttons and rotary knobs. Assigning pbs was done after watching your tutorial, but m unable to assign rotary knobs like airspeed or altitude etc using potentiometers of the joystick. Pl need your guidance in this aspect.

what about the hat switch for looking left right, up down... ect

Thanks, Froogle! I always gain so much from your videos and your presentation is pretty much no non-sense. Need that, I cannot stand gibber jabber and...(you get the idea).

Just found this... gonna try your way. Thanks.

Hi Froggle, your vids have always been so much help to me, I have just got FSUIPC and its grate solved all my issues but in turn has created one which I'm hoping you can help me with, I have the pmdg 737 and mostly all works fine except the parking break, as normal it well have the bottom left corner release parking creak with (.) but this well not work and as I normally do I use the lever in the aircraft itself but this also does not work and nor does my joy break button, all other aircraft seem to not have this issue but no matter what I do and have the break released in the aircraft I still have the bottom left release break text, any kind of help would be very much appreciated.

Correct me if I'm wrong. If I uncheck "Enable Controller(s)" I believe I would have to re-assign all the buttons and controls on my Saitek yoke and throttle quadrant. I did not want to do that, so I left Enable Controller(s) checked and then in FSX I deleted only the controls that I intended FSUIPC to manage. Seems to work - am I understanding the process correctly?

Thanks. I think. Very slick. I have the full paid for version. Maybe its time I explored just what I have paid for!!

Speaking specifically in regards to 10:19 - is there a way to have the control input be completely raw to where there isn't any acceleration to it? I swear I've been using MSFS since 2001, but the inability to have ACTUAL control inputs is borderline forcing me to switch to X-Plane at this point.

froogle, I have thrustmaster hotas x joystick with the throttles and also thrustmaster pedals. Since i connect the pedals i cant use joystick's rudders and i really like better to use joysticks rudder while im taxing around the airport. I can fix it with the fsuipc so i can use both rudders?

yeh froogle

Thank you so much !

Great Tutorial

hello froogle, great video! I do have a problem though with the axis! I assign the buttoms as i wish, no problem there, but when i try to assign the Y axis as the elevator, the fsupic recognises the axis but it doesn't allow me to assign it to something, the check boxes below the type of action required, is grey and unclickable...do you have any idea what could the problem be? I am using a Logitech Attack 3

When I get to the Joystick calibration part, when I click set on the values all I get is the windows Asterix sound playing, like there is another window open and your trying to click on it

OMG Thx you so much!!

hi my plane is drifting to left can yout help?

One quick question. Where do i find the saved keys file so if i format my PC and want to re-install FSUIPC, i can just paste the file back instead of re-programming all the keys over again?

Can i use this for keyboard?? CoZ i do not hav a rudder panel for my aerosoft airbus x n the rudders dnt tend to work

Hi Froogle: Although the steering wheel of the aircraft is moving right and left, the airplane wont go letf and right on ground and unable to taxi. This happened upgrading to p3D 4.1 Any clue? Thanks!

thank you

Thank you VERY much. ..as the fog lifts..... ;-)

how did you get the full screen without the black bars on the side?

Hi Froogle, can you tell me how do you set Hat Switch in FSUIPC?

Hi Froogle, my yoke in the game doesn't turn smooth, it's only turning straight left and right when i try to turn can you help?

Is this the same way you do it for PMDG ?

I got the same Joystick! :D

I don't understand. I have all these options for camera switch, elevator trim etc in the vanilla setup.. I don't understand the difference between this one and the default.

can u plz make a tutoria on getting u addon manager bck like recover it if you lose it

Froogle, i have tons of questions about fsuipc that you went through quickly. But every time i do one thing it leads to questions i dont get the answers too. I don't even understand the instructions Dawson gives because he "assumes" the reader already knows certain things. Do you know any interactive site i can use to assist me?

can you please tell me how you fix "jacky lines"?

Froogle sorry for being such a pain i have 1 last problem my fsuipc with the saitek throttle quadrant say if i power up it doesnt respond till its on 25 % now i have got rid of the stuff of fsx the controls its not worked ive done what you have done here it feels weird when taxing same with flaps im stuck again if you know how to get them alligned correctly so it starts from 0% that would be great thanks

thank you :)

guys u have problem with fsuipc when I click create mouse macro and click to taxilight on the airbus x extended the green box doesnt appear pls help me

might be nothing for you Pete but for us beginners its a massive ask

Does FSUIPC support Hawx 2?

I got thrust master joystick and it doesnt have a build in rudder control. and i am planning to use the hat switch to control the rudder.. will it work?

Will it work with Windows 10?

If you turn off the controller and set up fsuipc for your plane what happens if you simply go back and click on "enable controllers do my controls revert back to not using fsuipc?

Hi pls how to fix CH peddals o cantidad maje them work correct?? Trans

Hello,I am an engineer.I want to make a program with Csharp.The program using the FSUIPC.I would like to call the FSUIPC function to access some of the FSX data, how to use?

Hello What about pmdg?

Hi Froogle, What is the official website for the purchase of FSUIPC? There are quite a few sites I'm looking at, but don't know what the proper one is. Cheers :)

Flapssss!

I was wondering if fsuipc could give me the ability to give all buttons/switches/knobs in the airbus x a320 key commands. could you let me know how much it allows me to work with especially on the fmc/mcdu. Thanks, Fly

I can't see anything on Networking REX to reduce OOM issues, have you done a video on that?!I use FSX Steam BTW.

FSUIPC is available for direct purchase in Sim market, can we trust it?

frooglesim I Cant get my pan view oon my saytek yoke ... do u know wich is the right command i will aprecciate the help

A bird told me that FSUIPC now works with FSX:SE.

Hello. I have a problem with my FSUIPC4, and i was realy hoping YOU could help me.So i downloaded the FSUIPC because i was making a overhead panel and i needed to program it so that when i pusht a button or switch it whould happen on the FSX Steam edition to. Like a taxilight for example. So on FSUIPC i programed my yoke,quadrant and rudder pedals. And everything worked fine. All buttons and axees worked. But straight away when i for example programed a button on taxilight, i whould then push the button/switch and nothing whould happen in FSX. FSUIPC does registrate the buttons/switches but something is stopping it from working in fsx. I then deleted the hole of FSUIPC and re-installed it. And it still didnt work! I dont know what is wrong and i have tried fixing it for a very long time, but now i realy need some help. System info: FSX steam edition,FSUIPC (payd), Leobodnar chip (for buttons/switches),windows 8,PMDG 737 ngx, If any question PLEAS ask,And pleas help me.

what is the reverse button under in fsuipc?

when I try to download the FSUIPC4 it doesn't work it just says like wrong version of simmconnect or something please help!

Where is the paid link on Simflight? Only find the free version and "register" does not provide a payment option. Their main site is down and only the forum seems to be working at SimFlight.

Froogle a request from me could you please do how to connect avlisoft efb from one pc to another and one one wide FS Thanks

So this will stop the joystick form disconnecting randomly in FSX?

Why doesnt everything works with macro in the pmdg 737?

Is it worth it ?

how do i get fsuicp?

HOTAS WARTHOG.....utter nightmare!!

hey :) great video! I only got one problem - i bought the saitek switch panel but FSUIPC doesnt find it :( . I go to Buttons and switches and i push the switches - but he doesnt find it :((( can anybody HELLLP MEEE :P Thank you :)

no comments