HOW TO USE GOOD PROGRAM FORMAT IN YOUR CNC MILL PROGRAM

No video

HOW TO USE GOOD PROGRAM FORMAT IN YOUR CNC MILL PROGRAM

Рет қаралды 11,212

Tom Stikkelman

Күн бұрын

Пікірлер: 7

@xDjordjeMx 5 жыл бұрын

Thank you for the amazing tutorial, definitely the best online cnc tutorial!

@anhkhoiluong4707 7 жыл бұрын

Hi Tom, can you help me with the last code " G91 G28 Z0". Why we need to use G91 ( not continue G90). So the next N200 we need to add the safety line G90 to turn it back to absolute progam, isn't it ? Thank you so much, Tom.

@ashutoshdwi 7 жыл бұрын

Hi Sir, can you help me with the last code " G91 G28 Z0". Why we need to use G91 ( not continue G90). So the next N200 we need to add the safety line G90 to turn it back to absolute progam, isn't it ?

@lynndalsing1821 7 жыл бұрын

Does anyone know how to set up the pallet manager on a Doosan Horizontal Mill using a Fanuc 30i controller

@kylek1508 9 жыл бұрын

Tom what is the function of full stops after some commands?

@TomStikkelman 9 жыл бұрын

KylesGuitar The 'M01' command at the end of each operation will stop the machine between tool changes or operations. It allows you to open the door and check your part dimensionally to make sure you are leaving a proper amount of material for a finishing operation or you may need to check the ID of a bore before you do a cutoff. The 'M01' optional stop can be deactivated by turning off the optional stop button on the control panel so that the program will run all operations without stopping between operations or tool changes.

@kylek1508 9 жыл бұрын

Tom Stikkelman Aha what I was asking about is the dots after some of the commands for example G0 Z1. There is a dot after it, though I was wondering what the M01 was doing down there anyway! :)