You don't need a mug press? Or any type of heat? Is it dishwasher safe?

😱😱😱 Thank you 😊 💓 💗

Can this product be used on say a black or red cup

How long does this stay on, does it stay on long like the pri table vinyl from Jazeera?

If I am going to put epoxy over the viny, do I still need to put the transparent vinyl over? I think it will be too thick with both.

How material use for laminate vinyl? Thank you.

I've been trying for 2 hours. I'm almost out of paper, and it DOES bubble. Not only that, there's a bleed even when I even tried to use regular printing quality. What am I doing wrong? HELP

Will you be selling us the trimmer soon too?!

i wouldn't recommend the ink doesn't dry is been 10min is still coming out of the Clear Printable Vinyl. :( { I have never had issues with there stuff happy with everything else but this Clear Printable Vinyl is a fail but was worth try but no good i should have read the comments anyway if anybody try it let us know.

All the crucial parts of the process are cut out from the video!!!! Only the cheesy music and the impression is left, to convince how easy this goes! COMMERCIAL LIE!!! I bought this product on Amazon, and here are my experiences: - Very confusing, meaningless directions of use. Instructions on the listing and on the product even contradict each other! - Instructions say print on the sticky side! Nonsense! Should I peal off the vinyl from it's back paper and fit the sticky thing into my printer, to directly print on the sticky side??? If so, all images will be mirrored and the printer likely to be jammed! - Strangely, if I print a colorful picture on the glossy top of the vinyl (without pealing it off from it's back paper, as it supposed be used), the ink dries and the printing works fine! But if I print a document to the same surface (not a picture), the ink never dries, not even during a night! I tried it with colored inks not just black, and none of them dries! The only difference is printing a picture or a document. Strange! I use an Epson XP-352 inkjet printer with the recommended glossy paper, and high quality printing settings. - The size of these sheets are not A4, but larger! The right way to use these sheets: - There are two kinds of sheets in the pack. One is the vinyl sicked on a glossy back-baper. This goes into the printer, for printing on the vinyl side. -The other pack is the transparent protective layer to cover the printed vinyl with. So the printed ink will be protected in between the two layers. This is also a sticky transparent thing, but may be another kind of material, probably not printable. To identify this one, it has pre-drawn or cut, square lines on it's back paper. - The process is to print on the vinyl, then stick the cover on the printed side (once dry), then cut out the silhouette, then peal off the vinyl (with the protective cover) from it's back-paper, and stick it where you want it. Why is it not written down like this, as manual, or instructions???

This was a terrible how too video! It was much to fast, the wording didn't stay on the screen long enough and the white lettering was not a good choice!