How To Use Outboard Gear With Apollo Twin And Logic Pro

How To Use Outboard Gear With Apollo Twin And Logic Pro | A Step By Step Guide

Рет қаралды 6,086

Күн бұрын

Пікірлер: 24

@officialdiron 3 ай бұрын

Hey cool video, here's a little explanation I hope it's understandable. Warm greetings from Germany! Since you have inserted an XLR plug into a combination socket, the Apollo recognizes that the connection is on all 3 pins of the XLR and sets the MIC level. If you insert a TRS cable instead of the XLR, it would recognize the three contacts in the TRS. With an XLR it always depends on the MIC level and with a TRS, Line. This is for all interfaces with a combination socket the same.

@AdamBards 3 ай бұрын

Oh, makes sense, thank you!

@timothyinfinite 18 күн бұрын

So happy I found this video! Thank you bro!

@AdamBards 18 күн бұрын

You're welcome!

@pedalscapes 3 ай бұрын

Great work Adam. Sounds nice on the guitar. 😎

@AdamBards 3 ай бұрын

Thank you! I agree, I like it a lot

@Trioptic3D 2 ай бұрын

Thanks, I've been trying to figure this out with my compressor and Apollo Twin, but I'm using FL Studio.

@AdamBards 2 ай бұрын

You're welcome!

@RunningRebels 2 ай бұрын

If yu put XLR cables u force it through the Preamp, thats why u can choose only MIC.

@AdamBards 2 ай бұрын

Makes sense, thank you!

@sonicpalacevideos 4 ай бұрын

Welcome to the "Outboard" club!

@AdamBards 4 ай бұрын

Thank you! Excited to be here 🤩

@christophs.6149 3 ай бұрын

How do you route the mix to your speakers? I use the four apollo x4 outputs for my two monitor systems? I have no idea how to keep my both monitor systems running when all four outputs are used for outboard gear. Thanks for short answer. (Great video!!!) Cheers from Ibiza.

@AdamBards 3 ай бұрын

Cheers! Apollo x4 has 2 dedicated outputs for monitors, 4 mic/line inputs & 4 line outs... so just use the monitor outputs for your monitors.

@christophs.6149 3 ай бұрын

❤

@ejaybeatz3609 3 ай бұрын

Hey how do you use it for your daw for mastering or limiting

@AdamBards 3 ай бұрын

You need to "print" the output into a track. There are videos on YT explaining it for each DAW, I might do one for the Logic as well

@AdamBards 3 ай бұрын

Ok, I made a video where I explain this kzfaq.info/get/bejne/rtF7rLConN-XiZs.html

@terrellrhoden6133 4 ай бұрын

How would I plug mic in if I use xlr

@AdamBards 4 ай бұрын

The mic goes into the MIC/LINE inputs on the Apollo. If you're using both outboard gear and a microphone, then you might need an audio interface with more inputs. Or maybe your outboard gear is a preamp or a compressor? Then you plug the microphone into the outboard gear inputs and the outboard gear outputs into the audio interface inputs.

@MaisonLexBeatz Ай бұрын

Why did u bought the clone? There's alot of plugins (from UAD, Arturia, Overload) that can replace that piece of gear. If i were you I'd invest on monitors.

@AdamBards Ай бұрын

I wanted to dip my toes into the world of outboard gear and this was very good price/value option