How to Use the Box Maker and the BoxMaker Classic Apps in Easel

No video

How to Use the Box Maker and the BoxMaker Classic Apps in Easel

Рет қаралды 35,008

2 жыл бұрын

Let's make boxes the easy way with the Box Maker Apps in Easel. These apps can be adapted to make a variety of different styles of boxes and even drawers.
Here is the link to the project: easel.inventab...
Please consider supporting companies that support this channel (affiliate links)
Easel: www.inventable...
X-Carve: www.inventable...
CNC4Newbie: cnc4newbie.com...
FOXAlien: www.foxalien.c...
Amazon: Genmitsu PROVerXL 4030 amzn.to/3xPdgMP
STARBOND GLUE: www.starbond.com?rfsn=2376834.ca9c16
15% OFF PROMO CODE pawpawsworkshop15
Support my channel on Patreon: / pawpawsworkshop
Direct donations support my channel: www.paypal.me/...
Comments or questions My email is:
PawPawsWorkShop411@gmail.com
Official Website: www.sainsmart....
Link to Laser: jtechphotonics...
CNC4NEWBIE: cnc4newbie.com
Demon Controller By Designs by Phil:
cnc4newbie.com...
_______________________________________________________________________________________________
AMAZON AFFILIATE LINKS:
As an Amazon affiliate I earn from qualifying purchases. Purchases that you make help to support my channel.
Link to My Amazon Affiliate Store:
www.amazon.com...
Frequently needed supplies:
Genmitsu PROVerXL 4030 amzn.to/3xPdgMP
FOXAlien 4040xe link: www.amazon.com...
Replacement brushes for DeWalt 611 Router: amzn.to/2Sknovz
DeWalt 611 Router: amzn.to/2Sp7H6l
90 degree v-bit: amzn.to/2WspRDf
60 degree v-bit: amzn.to/2sYTK0k
Freud bottom cutting bits: amzn.to/2H30R00
Router Bit Set: Router Bit Set 1/4" Shank: amzn.to/2G4iQDH
Oramask 813 12"x10' Roll amzn.to/2VrrUe5
Oramask 813 12"x20' Roll amzn.to/2ViovxQ

Пікірлер: 63

@jeffdavis9892 Жыл бұрын

Paw Paw... Your box and drawer making video is just awesome. I think that dust boot will fill on my C-Beam. Thanks for a great video.

@PawPawsWorkShop Жыл бұрын

You are so welcome. Thanks for watching

@einfachtischlern 2 жыл бұрын

Hello, hope the hurricane cleaned all the dust out of your shop and not more ;-). Thank you for this video. I was searching for this long time. Cheers from France Tim

@PawPawsWorkShop 2 жыл бұрын

The storm damage in the state is horrific. It will take a long time to recover

@mmmmmmm8706 2 жыл бұрын

Good to see you back. Power and services must be restored by now.

@PawPawsWorkShop 2 жыл бұрын

We are very lucky to have power. Most of my families’ homes are still without power. Also there is no gas available for cars. We also have many repairs. Recovery will be very long.

@dexterbutler9735 2 жыл бұрын

Happy to see you made it through the hurricane. Hope all is well.

@PawPawsWorkShop 2 жыл бұрын

Yes, we made it. The recovery will be long with a lot of rebuilding. We can do it.

@UrquidiGuitars Жыл бұрын

Paw Paw you rule! Thank you for this video!!

@PawPawsWorkShop Жыл бұрын

You are so welcome!

@jimdrennan_signsonthetyne 2 жыл бұрын

I have thought about using the box maker in Easel.After watching your video you have convinced me to try it.Thanks

@PawPawsWorkShop 2 жыл бұрын

Awesome. Thanks for watching

@deonholt Ай бұрын

Good day. I am so relieved that I found this video. Thank you very much. I was almost thinking I will never be able to use my CNC for box joints. Question: What material are you using for this box?

@PawPawsWorkShop Ай бұрын

Glad it was helpful! Masonite was the material used.

@warrenking1815 2 жыл бұрын

Glad to see that you made it through Ida, and liked the video especially the part about not fitting the machine as I have a 3018.

@PawPawsWorkShop 2 жыл бұрын

Thank you very much. Yes, we made it through but just starting the recovery. Long long ways to go

@daveshackshack Жыл бұрын

Thank you very much, enjoyed the video.😀

@PawPawsWorkShop Жыл бұрын

You’re so welcome. Thank you very much

@mariemeyer2885 2 жыл бұрын

Another wonderful and informative video.

@PawPawsWorkShop 2 жыл бұрын

Thank you very much

@aburk8417 2 жыл бұрын

Awesome tutorial!!!! Thank you!!! Question...why tabs on the drawer...but not on the box?.....Nevermind...you answered it at the end ☺

@PawPawsWorkShop 2 жыл бұрын

Just trying to show different options. Rarely use tabs at all. I’m always showing different techniques and methods to do the same thing

@MichaelDavis-gu3oi 2 жыл бұрын

I was just wandering why your dust boot hits the clamps. I set mine where the bristles are just proud of the project as well and the bristles just glide right over the clamps. As long as you don't make the clamps you use taller than the bristles they will not hit the plexy housing of the dust boot. At least mine never have the upgrade did not change that either works the same with or without upgrade. I thoroughly enjoyed the video and you and the comment section gave me some great project ideas thank you for all you do. Have a blessed day.

@PawPawsWorkShop 2 жыл бұрын

I’m being overly precautious. I don’t want to take the chance of any interaction with the dust boot to a clamp that could cause a problem

@GregoryLynnWood 2 жыл бұрын

@@PawPawsWorkShop I agree, You can sit the bristles on the board and the dust boot will still just go over the clamps. But if you are overly cautious your bump stops are great here.

@charlesbopape5404 2 жыл бұрын

I enjoyed this very much. I'm in the process of starting my own cnc business and I'm trying to learn as much as possible before I can get started. I would like to know if you have videos of designing and assembling chairs and bed side tables. Looking forward to hearing from you.

@PawPawsWorkShop 2 жыл бұрын

I have some furniture built on y channel and I am planning on two end tables shortly. Thank you for watching

@pethuds Жыл бұрын

How do you compensate for the bit size you are using. I have tried this and the joints are very sloppy. Do you cut on outside of all the pieces. Your help would be greatly appreciated.

@PawPawsWorkShop Жыл бұрын

Yes, the app generates on path which will make joints loose. Change to cut on outside

@pauls.5815 Жыл бұрын

I like the tape Idea, except for the fact that blue tape is out of control price wise.

@PawPawsWorkShop Жыл бұрын

Yes, like everything else, prices are crazy

@chriswade3901 Жыл бұрын

What dust boot is this? I have the dewalt DWP611 router also. Thank you!

@morrismurray3621 Жыл бұрын

I tried it with MDF and made a slide lidded box. The cut groove was too close to the top, leaving only 1-1.5mm of wood, so the lid just pulled out. Do I need to modify the program before cutting?

@PawPawsWorkShop Жыл бұрын

Yes, modify the box in any way that works for you

@copeland360 2 жыл бұрын

great videos , did you mention in a previous video about free Marines logo we could carve ? thanks

@PawPawsWorkShop 2 жыл бұрын

I have shred the logo on the Inventables project page. You can also get it from a Google search

@JolienBrebels 2 жыл бұрын

Hi, I just got a cnc and it looks like you have some great videos about it! Is this version of Easel free? Or is it a paid version like the easel pro?

@PawPawsWorkShop 2 жыл бұрын

This is the.free version of Easel. Congratulations on getting the CNC. Should you have questions please ask

@bobhooven7094 2 жыл бұрын

I enjoyed today's video with the Box maker app. If you were to make a tray instead of a drawer how would you do curved handles on the sides. Thanks for the videos Bob

@PawPawsWorkShop 2 жыл бұрын

Same way. Edit the nodes by removing the ones that were not necessary and to accommodate the handle

@mattivirta 21 күн бұрын

have this normal human dimensions metric system, because only 3 country in world use old bre-history cavemen imperial dimensions today. and have this software, easel or what have ???? for linux debian too or only old windows system.

@PawPawsWorkShop 21 күн бұрын

All too often countries mix the different systems. The US is not different. We use both systems depending on the field that you are in and from reading many of the comments it seems many other countries do the same. It would be nice to have just one system everywhere

@sr4087 2 жыл бұрын

thanks for the video, but, why no waste board underneath? you are gonna wreck your base board quick

@graciebel263 Жыл бұрын

What if you want to use 2 types of wood? How do you do that?

@michaelparker148 2 жыл бұрын

Have you tried to make a box with a hinged lid on the X-Carve?

@PawPawsWorkShop 2 жыл бұрын

Not yet. Sounds interesting

@GregoryLynnWood 2 жыл бұрын

Just curious, what vacuum are you using.

@PawPawsWorkShop 2 жыл бұрын

You can use just about any shop vacuum. I have a Rigid

@ohske 2 жыл бұрын

😯👍👍👍👌

@PawPawsWorkShop 2 жыл бұрын

Thanks

@justanotherguy8791 2 жыл бұрын

You didnt happen to share this project did you?

@PawPawsWorkShop 2 жыл бұрын

Yes, it’s in the Inventables project page.

@justanotherguy8791 2 жыл бұрын

@@PawPawsWorkShop Thank you so much. I've commented so many time how much you've helped me learn. Not skipping steps, not being judgmental just easy going videos. Thank you sir

@PawPawsWorkShop 2 жыл бұрын

You’re very welcome

@sekritskworl-sekrit_studios 2 жыл бұрын

Is Easel Free?

@PawPawsWorkShop 2 жыл бұрын

Yes, the basic easel is free and is a very easy program to learn and is very capable of doing many basics projects. If you chose to add the pro version then that is paid and it does add a number if additional features such a vcarving, raster, ramping and a number of other nice features

@mikecrook8434 2 жыл бұрын

Sound quality is poor. We can't hear you.

@PawPawsWorkShop 2 жыл бұрын

Thanks. Fixed the issue

@Pir8Gaming361 2 жыл бұрын

Don't ever use easel. It's the worst software ever for a cnc mashine. I know I was forsed to use it with my new cnc croncraft mashine. Worst time of my life right there.

@PawPawsWorkShop 2 жыл бұрын

Easel is an excellent beginner software that has a lot of the basic features you need to be successful. It’s easy to learn and you can get up and running quickly. You do not need a separate sender to get the project to the machine. It’s all there. I still use it today for quick projects and projects where I need to make changes and then carve another.

@Pir8Gaming361 2 жыл бұрын

@@PawPawsWorkShop personally I had the worst experience with easel any person that starts with cnc could have. Since going over to aspire and lightburn I have never been happier.

@PawPawsWorkShop 2 жыл бұрын

Fantastic. Both are excellent software