How to use the Camo Hidden Deck Fastening System for Building a Deck

Рет қаралды 47,291

5 жыл бұрын

In this video, I'm going to show you the unboxing of the Camo Marksman Pro Deck Fastening System and how to use it.
For Camo Deck Fastening System used CLICK HERE 👉 amzn.to/2zJf3X5
Deck Screws for Camo Fastening System CLICK HERE 👉 amzn.to/2ZKrjkA
Installing the deckboards was an extremely fast process once we had this Camo Deck System. It had a screw hole in each side of the tool so my wife and I were able to secure Camo screws into each side of the deck board at the same time and move quickly through the project.
It's really as easy as squeezing the handle on the Camo tool and popping a special screw onto each side. Then drill in the screw with the bit that comes in the box. Make sure you align the tool over a joist so the screw has something to attach onto, obviously.
Enjoy your brand new deck! Big or small.
------------------------------------------------------------------
Tools Used:
⚒️⚙️🗜️🔦📐🔧🔨
Camo Deck Fastening System:
amzn.to/2zJf3X5
Deck Screws for Camo Fastening System:
amzn.to/2ZKrjkA
Dewalt Cordless Compact Drill:
amzn.to/2ZGuKc9
Ryobi Hammer Drill:
amzn.to/2MRONCF
#DeckBuild #BuildADeck #DeckDIY
------------------------------------------------------------------
Kelly Concepts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

Пікірлер: 42

@craigmoore1435 4 жыл бұрын

I used this system on a hardwood deck 3 years ago. It came up looking amazing. I get comments about it all the time including from tradies, builders etc. Some other tips - predrilled the hardwood as I was worried it would split the timber and make sure you put the screw furtherest from your last board first. It just helps to push the board up against the previously secured board for a more accurate spacing.

@KellyConcepts 4 жыл бұрын

Great advice Craig. It took me a few boards to begin starting the screws on the opposing side of the board. Definitely keeps the spaces tight and consistent.

@gamegenies8600 5 жыл бұрын

This is exactly what I needed.

@poultonprojects 5 жыл бұрын

Great video!!

@WoodChuckCreations 5 жыл бұрын

Great job! That’ll make all the screws line up well!

@KellyConcepts 5 жыл бұрын

Thank you! Yea it was perfect for hitting the joist with the screws.

@KellyConcepts 4 жыл бұрын

Has anyone used a different tool outside of the CAMO Brand? This one worked great but just curious to see what else is out there. Please consider subscribing 👉 kzfaq.info.

@Dutchshedwoodshop 5 жыл бұрын

Did not know this tool! Looks handy to me. Thanks 👍

@KellyConcepts 5 жыл бұрын

Haha yea it is super awesome

@jamestorres5582 2 жыл бұрын

Nice . I'm buying. New subscriber and thank you for the review

@roicarl 3 жыл бұрын

Looks great but I have one question. Did not see this covered in the advertising material. What do you do when 2 boards butt? Guessing you must drill a hole so the board doesn't split? The documentation says to keep screws one inch from the board end.

5 жыл бұрын

Hello my friend. nice system. I watched curiously. Thank you for sharing.... 1. like :-)

@grettacaydendaltonw.m.b.7945 2 жыл бұрын

Can anyone tell me if I have other brand composite screws, if I can still use this tool? Would they fit in the shaft? (Maybe if I have an extension and mark the exact length)

@nikgrekk2020 4 жыл бұрын

Hi! Do you think for soft wood it's good enough?

@TheHarly 5 жыл бұрын

Nice..thanks for sharing friend

@KellyConcepts 5 жыл бұрын

Thanks for watching!

@Warren3carpentry 3 жыл бұрын

I use this system also and I love it I made a couple videos on it also!

@KathleenMyers-q5p 28 күн бұрын

Do you use this with grooved or flat composite deck boards

@767dag 3 жыл бұрын

How do u deck boards against wall ??

@TheGrantAlexander 5 жыл бұрын

I have this tool. It works awesome and made building my deck a breeze. Worth every penny! I will say, I wish there was a way to use it close to a wall.

@KellyConcepts 5 жыл бұрын

I didnt think about that, luckily I didnt put this against any walls!

@TheGrantAlexander 5 жыл бұрын

@@KellyConcepts ya! Lucky you :p

@pmmahone1 4 жыл бұрын

There is a way to minimize the face screws on the board against the house using the Camo Marksman Pro. The X1 tool, by the way leaves a 1/16" gap - better for boards that will shrink

@ChelseaBeacon 3 жыл бұрын

Curious why no rim joints board on this deck? Even using a sleeper set up for the joints, still should have a rim joist I would think to keep the deck square over time.

@mmitchell3540 9 ай бұрын

Can this system be used with composite decking?

@johnfuller4991 4 жыл бұрын

I'm replacing 10 yr old deck boards that were face screwed and rotted the wood and the screws at entry point. how is your deck holding up?

@KellyConcepts 4 жыл бұрын

I have 2 decks now that I've used with this, both are doing great (although they're only a year old now). I will consider sealing the wood on a yearly basis to maintain it with a quick paint roller. Good luck!

@LonghornWorkshop 5 жыл бұрын

Best tools are the ones that don't require any set up, like this one. I was shocked that the plastic case around the tool didn't require a chainsaw to open it up. Another plus for this tool!

@KellyConcepts 5 жыл бұрын

Haha so true. Usually you need a tool to open the tool.

@cindymckenna6796 4 жыл бұрын

Do you have to top screw your stater board

@captainkangaroo4301 2 жыл бұрын

You must have to face screw the last board nearest the house.

@mk-jm5tv 2 жыл бұрын

I don't want those giant gaps in my deck. is there a tool that doesn't need big gaps ?

@jbhcrazyskills9508 Жыл бұрын

Get this same Camo jig, but the one with 1/16" spacing, which is the one this guy should have been using for wet pressure treated boards. The 3/16" spacing jig as seen on this video is for composite or pvc decking.

@kevinrivard3875 7 ай бұрын

@@jbhcrazyskills9508wet pt wood will gap on its own.

@bonzolafarti2582 4 жыл бұрын

I can see one problem right away. Treated lumber shrinks considerably as it dries out. That's why you're supposed to install the deck boards right up against one another -- no gap. Over time the boards shrink and you end up with a nice gap. With this device, though, you're going to end up with a HUGE gap. Not sure how you're going to get around that problem.

@RailNut2 3 жыл бұрын

Use the CAMO Marksman Pro -X1. It spaces the boards only 1/16 inch.

@nickchinavare5416 3 жыл бұрын

I said the same thing. Pressure treated lumber shrinks big time!

@jaycartmell6414 2 жыл бұрын

Oh dear, whatever will they do if there is a gap. Lol, who cares.

@chadhoughton5780 2 жыл бұрын

All everyone wanted, was to see how the screws went into the wood and you failed to zoom in and show it. Thumbs down.

@nickchinavare5416 3 жыл бұрын

Lmao.. you don't gap treated lumber. 🤷🏼‍♂️

@KellyConcepts 3 жыл бұрын

You definitely should. Pressure treated still expands and contracts. Even composite decking has gaps...

@nickchinavare5416 3 жыл бұрын

@@KellyConcepts no.. pressure treated lumber shrinks extremely. I do it for a living. If you put 3/16-in Gap it'll turn into 1/2". I'm installing a redwood deck and that would be gapped