You're doing God's work man. It's absurd how much money it costs to get into NV... for those of us lucky enough to save up for it, it's nice to save a few hundred on the ear pro like this.

Ay man just wanted to say thanks for the straightforward tutorial. Shit made me feel like an engineer . Lebanon here we come

Hey man. I’ve been looking for instructions for this exact project for a while. Thank you so much for the straightforward and direct instructions. Subbed here

Exactly what I needed to know -- I had the same idea but was worried I'd destroy them in the process. Worked great with your instructions!

Thank you, thank you, thank you!!! You just saved me tons of money. When I saw the cost of the Peltor headset, my jaw dropped. I'm going to purchase my helmet today and was wondering if I could do this same thing with my Walkers.

Dude, this tutorial is AMAZING!!!!!!

I've been meaning to do something like this for my helmet and this explained it really well. Definitely helps to see it done before jumping in for a "Measure Twice Cut Once" approach

I'm very glad I saw this. I'm looking to get a helmet and I didn't want to spend $600+ on headphones and all that. Thank you!

Gents, remember; this is a great set up for a beginning point into headsets. You will never regret spending money on some amps/comtacs/etc. the ability to identify which direction a sound is coming from is massive. Save up! Me and my guys got into Comtac VI’s and they have more than surprised me. It’s a big difference know that you are getting shot at, and knowing WHERE you are getting shot from.

I love the new outro for the last 20-25 videos or so. It got stuck in my head for a few days after I binged your videos last weeks to catch up lol

I can agree to this, I did the same thing to my head rig. As long as your careful with it and take your time, it’s worth it

I am a ROK marine and considering if I need to buy Walkers ear protection and this video is very helpful for me. Thank you very much.

I would absolutely love a helmet setup/review vid. This lid fucks so hard.

video saved me from messing up my headset! thank u bro

Dude! Thanks. I was looking for such video for monthes...

Super!! I was just wondering if you could clip razors to peltor arc's and then I stumbled upon this video, cheers mate 🤝🏼

thanks bud, I attached some to my ops core. looks badass now

All your missing is noisefighters gel cups for your helmet set up! I have a pretty similar set up to you and the gel cups are a game changer and reduce a bit more sound as well. Cant wait to hear a review on that light!

Thanks bud , this is a very good idea I will copy, 10/10.

Spend a few more bucks on the Razor Quads, for 360* hearing amplification. I've had the mic jack pop out so many times on the standard Razors I never use it anyway. You can run an ear bud mic under the cups, and it works fine for quiet comms. A lot of PTT Mic's have a plug for an earbud anyway.

Ty for the video. On my sub list now. Good luck with the new house.

Just what I was looking for.

dude! this video rocks! thank you.

Thank you Sir, that was very helpful!

As far as running comms with it they have a radio/mic that connects to the razors. Decent cheap option for that as well.

I just did this to mine and it works, but it is possible to slip the ear cups off the wires. bending the wires inward helps with tension and keeps them on better

I love my Walkers being I have about 6 pair, so I can sacrifice at least two, one in black and one in FDE. I have the pair with the velcro for patches.

Exactly what I was looking for. My walkers feel great, electronic hearing is great, can hook up with a cable, like I really don't want to spend $400 to $600 on comtac peltors so this is perfect. Thanks so much!

I was actually going to make something to adapt a set like this and it looks like the y make the already very cool!

Awesome video, thanks!

To be honest your lighting and backdrop seem fine. Reminds me of JRE

I'm not interested in the full helmet mount mod, but I am doing my own weird electronics mods to my Walker Razors since I love them for daily driver headphones. I appreciate you saying how to remove the wire band from the actual ear pieces, which helps me in my own goals!

Genius, I'll be doing the same thing.

Great video!!!

Awesome vid. Thanks dude. Subbed!

Did this myself just the other night thanks to you sir, did you manage your cable by just running it through the top pads?

Fantastic! Thank you!

Like your video, very natural, and comfortable. Subscription already!

I love your helmet setup and I am on a budget too and want to get into nightvision. Can you give me a list of what you got on your helmet?

Take those little rubber pieces that go between the nods and eyes and flip them up so you can use your peripheral vision

This is a game changer now that Walker has the “Razor Walkie talkie attachment.” Basically you can get coms for less than $100 instead of spending $600-1200 on peltors or opscore

I did this with a cheap bump before I got my ballistic hat. Gonna have to see how the walkers work on the ballistic. They wouldn’t compress against my head when I put them on the bump helmet.

Can you make in depth review of your halmet?

Walker has a walkie talkie attachment for those as well.

Thanks for the video but I didn’t see which ARC adapter you used?

THANK YOU. Been trying to find a mount to work with my razor slims with no luck, was wearing my ear pro under my helmet with no pads and it’s uncomfy

Really enjoy your channel. I'd love to know more about what you have to do to make a firearm work with a suppressor. Do I need an adjustable gas system or is my a2 setup OK as is? Not sure if my psa block is adjustable either... One can for 22 up to 6.5 creedmoor?

Could I add on the walkie-talkie piece to the headset? Or it won’t fit with the helmet?

Where did you get the mount? Did it come with the helmet? I have hard head veterans helmet and want to do the same. Looking for an Mlok mount

I did this with my setup, but with different connectors. Unfortunately mine a loose AF so I've had to tape them on for the time being

just got the Bluetooth version of the walkers. sucks I need to cut the band on the top, seems like it would make the band unusable after that.

I have a set up like that but I’m having issues with the headphones sitting snug against my face, any tips?

I want to get the walker razor slims with the walkie unit and do this on my bump helmet. So i have coms may not be the best encrypted but its still coms

Can you do this for HL Sport Impacts?

Maybe it's my head shape or I screwed up somewhere or something but I just did this with my set of walker earpro and now they don't press firmly against my ear, any way to adjust this?

How do you increase the tension slightly. The headphones actually pop off my ear at the top because they’re too loose

Very nice, thinking about using mines for Airsoft to protect my hearing from thunder b’s grenades

I've got walkers razors and a baofeng uv5r is the radio/comms noise supposed to only be heard in the left earmuff (the one the baofeng is connected to)?

walkser makes a mic attachment for those ear pro muffs...got it today on amazon for 26$

Have u add coms with your walkers yet

fun fact, if you pry the plastic piece from the headphones then turn them 90 degrees they should come out as intended so that they dont fall off under normal use

Are those the Razors? Do you have directional awareness? Mine sound like a mono channel split in two. I can’t tell if the sound is coming from front/back or which side. My Howard Leights at the same price point, no problem whatsoever

I did this exact setup and love the look. However my walkers sit like a inch away from my ear, got any tips to make them fit snugly.

Question, i attached it onto M3 adaptor, but the ear muff is super loose, sometimes falls off when i rotate it. Any suggestion to fix that problem?

Mine slide off the metal things that go into the Mount to the ear portion

Was using m32s from earmor but they broke and I was overall not satisfied with them, that being said I have the helmet mounts by earmor and it looks very similar to those so does anyone know if I can just buy the walker razors and slip them on the earmor mounts?

Thanks, I'm just gonna put razor on my bump helmet set up. you're using surefire IR. right?

Curious if you have tried to put the Walker Razor Walkie Talkie on while mounted?

On the topic of fitting a helmet and pads-there is a reason that helmet manufacturers have “fit guides” and “fitting kits” for their specialty helmets. As noted, the helmet is the nerve center for most of the warfighter’s sensory gear: communications headset, night vision goggles, O2 mask, gas mask, and so on. And the head is a very sensitive part of the body. The helmet needs to protect your brain from TBI/ballistic threats while keeping all the aforementioned gear stable and in ready-use placement, all while creating the least amount of discomfort. It is absolutely imperative that a helmet is fit properly to the wearer. If it’s too small, the fit will be too tight and the wearer will experience a pressure headache. To relieve this pressure he may opt to use thinner pads, which leaves him open to possible traumatic brain injury (TBI) in the event of blunt force trauma to the head. If the helmet is too big, the shell could move around on his head during use and compromise coverage in the event of ballistic threats, while also shifting mission-critical gear around. I always recommend biasing toward the larger option if your head measurement puts you in between sizes. The difference can be made up with pads and chinstraps. If your measurement puts you squarely within the range of a specific size, then you may consider yourself lucky and you should stick with that size. One thing is certain: Wearing a helmet that’s too small for your head is one of the most miserable feelings.

Can this attach to my Milwaukee safety helmet?

What mounts are those for the ear pro ?

I did this but I am having a hard time getting them to seal completely off on the bottom because they won’t go up far enough under the helmet and if I keep trying to push it higher one of the mounting clips pops off of the ear muff. I’m upset I ruined a good pair now. Im using a ops core bump with arc rails and peltor mounts. They seem like they aren’t wide enough for the walkers.

I have a similar setup with walkers just wondering if theres a way to protect the wires more?

what was the arc rail adapter you used

Please, what brand and model is this helmet? Love the black multi-cam!

wondering if you put them on the high cut other way on purpose or does it not matter which way they go? or is that the right way? CONFUSION INTENSIFIES

Thank you for this. I have a pair and wanted to attach them to my issued helmet (because Uncle Sam likes to be cheap with us).

I saw oomp had these in his nikkikoavacado vid, wondered how he did it

Does anyone have any suggestions of what parts I need for a similar setup on a full-cut type helmet like Viper P4? It has rails for mounting the earpieces but I'm not sure what parts I need.

I’m sure you’ve answered this hundreds of times but I’m a first time viewer. What helmet are you using?

I just installed mine and they seem to be slipping off any ideas on how to fix that?

When is the review of the helmet coming comfort and fit.

My ear pro is those $5 walker ear pro from walmart

I did this set up on my helmet with an old pair of walkers. Very secure and no problems with the mounts but I can't seem to get the muffs high enough! They are pushed slightly up inside the helmet cut and its still not high enough to not sit on the tops of my ears. They sit lower on my jaw and I can hear the muff unseal when I turn my head left and right. Any ideas on how to fix this?

wherre did you get arc rails

Apparently these can be converted for comms with Baofeng. Have you tried that for communication?

I have that problem where my ear pro slides off the arc rails when I’m running or moving a lot and idk what to do

The only issue I have with the walkers is when you rotate them off your ears, they don't hold shape when you rotate them back, and the seal isn't great.

i did the same thing with Howard's, but since the metal wire holding tabs on the arc rail adapters are oriented 90deg to the Howard's, i just heated the plastic with a lighter and squeezed gently to make a more secure interface.

Can you rotate these up with the helmet on, or is the connecting wire too short?

What type of ARC Rails are those? Would any brand work with walkers??

Anyone had any problems with them not sealing off properly? I upgraded to the gel cups which made it a little better than the standard walker cups but my ears tend to end up ringing especially after rifle (shooting unsuppressed).

Does it have to have to be peltor mounts?

What ARC rail adapters are you using?

Can you reuse the original wires that hold the earmuffs in place the peltor ones are loose on mine & slide up & down almost come off the exact problem you’re not having 😭

YO I GOT ACTUAL GPNVG-18 FOR 15 BUCKS Now I need a mount for the nvg and the fast helmet

Anything about communication with this razor? Any advise?

Hard head veterans actually offers the method to mount these on your helmet

What kind of halmet is it bullets prove and what kind is it. It looks bad@$$.

What is the name of the mount he uses?