This video made my life about a thousand times easier and saved me a service call. Thanks a bunch!

Did the repair with husband in 1 hour and we are still married!! Followed every step and all went well. Thank you so much!!

Thank you sir for a well explained and thorough walk-through. You saved my wife and I a headache, several arguments and a $125 appliance service call fee. Keep up the great work.

Great video! Perfect steps and process flow. I will be buying my replacement part from you guys too. This dude is the Bob Ross of appliance repair.

The key to saving time ... is the trick to put the metal band on for the last step. This dude nailed it... unlike other videos. Nice job... and thanks!

I’ve literally watched it 3 times and I can’t express how grateful I am for such a thorough and absolutely fool proof instructional video! I highly recommend this video compared to any of the other 5-6 videos I attempted to use....I didn’t even make it through half of them because they either left out info or were reminiscent of an early MTV music video. Thank you so much!!!

His way of putting the seal clamp back on worked wonders. Better than the other videos I watched. Thanks

Exceptional How-To video! Clear, simple,’s step-by-step walk-through that made replacing the washing machine boot/seal totally doable by someone who has never done this before. Took me a bit over an hour as my model was slightly different than the one here, but overall a very doable project. Thank you so much!

Thank you so much for making this video available..... After 14 hour work day was able to disassemble and rest. After a great nights rest was able to reassemble without any leaks or "extra parts" left over!

Watched the video. Ordered the part from them at 2pm on Black Friday 11/25/16. It arrived standard shipping at 3pm Saturday 11/26/16. Installed and done by noon 11/27/16. Well done video and instructions! Will use these guys again for sure!

Just repaired mine and it was easy! Thank you very much for the tutorial! Love the fro by the way. Keep it 70’s! Peace out!

Thanks! I will never buy another Maytag again. Second time in a year and a half I’ve had to do this

Another excellent, helpful Appliance Parts Pros video. Agree with other positive Comments. Perfect, easy-to-follow steps and procedure flow. On a DIY scale of 1 thru 5, with 5 being the hardest, I'd say this job was a 2-3. Definitely a task most people can do. Just requires some patience. Main difference between my experience and what is seen in this video is that I spent approx. 8-9 hrs altogether - incl. initial troubleshooting, establishing what is needed to fix, researching DIY videos, ordering parts, making notes + 2 hrs cleaning all of the parts I took off + incl washer innards + cleaning area behind washer prior to re-install. Only a DIYer would do all that making a much more complete, thorough job than if done by service technician. If I did this again I could get the total time, incl. ordering parts down to 4-5 hrs. One other detail: When disassembling I removed the plastic soap tube that connects to the rubber bellow tub seal at the 10 o’clock position. It was caked with detergent, etc so I removed and cleaned. When I re-installed I added a 2-1/4” diameter pipe clamp to the upper end where this tube connects to the bottom of the plastic soap tray. I could foresee the possibility of that connection leaking, which if it happened would require you to disassemble the washer again. This video -- which only applies to this specific washer rubber door seal has been screened 263,000 times in the past 8 years. Gives you an idea of how common this fix is. Over the years I have bought many replacement parts from APP for a wide variety of appliances. Matt -- the technician-teacher is indeed “the Bob Ross of appliance repair”. Thanks again. Keep up the terrific work!

Great video! My boot replacement was a breeze thanks to you. I originally watched a different video, which was not exactly my model, indicating that I would need special spring tools and that I'd have to disconnect wiring and remove the counter weights, with an estimated job time of about an hour. I only had to remove the top panel, control panel (no disconnecting of wiring), bottom panel and door and needed no special tools besides a torx 20 driver. It took about 15 minutes. Cheers!

By far the best simple exact instruction ever changed mine in 40 mins cleaned the hair trap and scraped 9 years of soap gunk . Thank You great vid.

The spring on the wire which attaches the bellow has definitely been stretched out a bit...the wire for my bellow won't even stretch to the 1 o'clock position and this guy has it stretching all the way over to the 2 o'clock position. I really need a third arm to wrestle this wire into place. Great video,very helpful and informative, thanx.

Your excellent repair video helped with our washer bellow tub seal reinstall repair, and was much appreciated. Thank you! We will consider patronizing your web site for any future appliance parts needs.

Did this for the first time, only took me about 45 minutes from start to finish. Thank you so much for this video

Phew for a second there I was going to give up but glad I didn’t! Thanks for saving me some 💰 💰 💰

Thank you so much for this video. I followed it carefully, and the repair went extremely well. I owe you a beer!

Guys, thank you very much for posting this video! My retainer ring popped off unexpectedly and I wrestled with it with my bare hands for 20 minutes before I thought to come to KZfaq and...LOCKING PLIERS, boys! Locking pliers! Once I executed this with locking pliers it went right into the groove. I have already saved your website and in the future, when I need parts, I'll order with you. "Appliance Parts Pro...if you didn't buy parts from us, it's not fixed!"

Very instructive and complete video. Thank you very much!

Matt does a great job explaining and showing how it's done. Excellent helpful video.

This repair can be carried out without having to remove all the panels. This can be done through the door itself. I have a washer dryer setup, with the dryer being on top of the washer. So getting the dryer off the washer is a tedious task. I would literally have to disconnect everything. I was able to remove and install the seal just by gaining access from the door. The final inside clamp was a bit difficult due to limited access. But with a mirror it wasn't too difficult to line up. Thanks for the video!

Thanks! Boot came loose and this showed me how to properly put it back on.

Thanks for video. I ordered the seal and installed following you step by step and no more leak! Thanks again.

Thanks. I subscribed. New home owner with lots to learn...... and fix.

Thank you for the helpful video! My wife and I just replaced our tub seal, following your steps very closely. I think we're good, but one thing we noticed is that the door doesn't stay closed as securely any longer. Once we start the wash machine, the door locks, so we don't have a problem with leaking -- that much is good! I will take the front cover off again and re-evaluate the placement of the locking mechanism.

Thank you this helped me out big time. Saved me a ton. It only took me about one hour. Thanks

Thank you! This video helped get the difficult spring back into place!

By far the best video on this type of repair. I have installed bellows before without taking the control panel or the front cover off but after watching this video I did and it made the repair much more comfortable to work on and easier. Thank you much!!!

Excellent video. I'm told that the bellows that have been installed are failing prematurely. The reason is that people overtighten the clamp. Your tip of putting a black mark on it saved me from overtightening it for sure. The tip to use vice grips to help put on the spring seal was also a big help. Thanks again!

So grateful for these guys! They make it very clear.

Excellent demo with clear instructions. Thank you!

This guy knows his stuff! Thanks for helping me save a ton of money with this helpful video!!!

This was one of the best videos...I was able to follow along through the steps and change out the bellow for my Maytag. Awesome job...thank you so much!

Great videos but they remind of something straight off Tim and Eric Awesome show

That's a fabulous video! Thank you so much for posting this info. I replaced the boot gasket with no problem at all, thanks to the clear instructions in this vid. Excellent work! 1,000 thanks!!!

Matt and appliance part.com have the easiest to understand videos. I had an F5E2 error and an occasional leak across the top of the bellows. I found that the larch hook on door was a little loose. Checked and error code was still there. I didn’t know to how to delete codes. Manual was taped inside the bottom front panel. Inside the lower front panel is the drain pump with attached filter. I cleaned years of coins and other debris from the filter. No more leaking and I don’t need a new bellows. The loose door hook and the high water volume caused by the clogged pump filter were the problem

I Needed to put the wire on after cleaning the gasket. Thank you for the detail of using a vice grip AND the direction of pull. I did it!!!!!

Thanks for doing this step by step.. took 90 min maybe.. that 3rd clip on the console was a beast.

Truely a life saver.

Great video, very helpful. One comment to make things easier, instead of using a locking pliers, use a hook awl in the spring loop, not the wire loop. This make pulling the spring so much easier than locking pliers.

this video made me look like i knew what i was doing ..thanks so much

just finished installing the seal thanks to you. thanks alot!

I just got done with my install. Great video thanks!

TYSM! This video is very helpful!

Thank you so much! This video was excellent and so easy to follow.

Thank you for this video it saved me time and money!

this video rocks!! fixed my washer all,by myself!!

I looked at several videos but this by far was the BEST :-) GREAT TIP on marking the band that holds the bellow in place!!!! Since the bellow is rubber I'm guessing I could have easily tightened it more, which I'm guessing may not be a good thing! Without marking it I wouldn't have had any idea how tight to make it when putting it back on. One other video did not take the panel or front door off which sounds like a great time saver BUT I think it would have been way more frustrating trying to take the band of and even more trouble getting the bellow and band back on!! The only frustrating thing is that there are SO MANY varieties of washers that each seem to have a different trick to getting the control panel off :-( This frustration is not directed at you, its just a fact, not something you could have done better in the video unless you made 100 videos, one for each model :-D Thanks SO MUCH for putting this video out there, I can't tell you how much time and aggravation you saved me!

Thank you for this! I appreciate it

Outstanding and easy to follow. Thank you kindly!

Great video! It made this chore simple and fast.

So Ron Jeremy is playing an appliance tech now...can't wait to see how this pans out.

Thanks a lot! The instructions are spot on.

Great video, very nicely done. Made the job so much faster.

This video is straight forward & is allowing me to fix my machine!!! I am also experiencing a malfunction with the start push button. It is not connecting consistently. Do you have a video for this fix? May tag 2000 series.

Perfect Instruction. Thank you!!! I had a Kenmore HE2t.

Great video, thank you! I had no problems at all following this, perfect!

Thanks, for the great information. Only thing is, that I have my dryer stacked above the washer, which makes it very difficult to execute removing the top panel.

Thank you so so much for saving me $$$ . Great post

This is a great video and I followed the steps as best I could. The only problem I ran into is the door won't lock without me holding it! I took the spring clamp off and it will lock sometimes. It seems like the part of the boot that touches the door appears to be sticking outward. No leaks though when I use it. Any suggestions?

Thanks!! Great video!

Very helpful video thank you.

This video worked best for out Whirlpool Duet WFW9750WW001 front load washer

Very well made video.

Excellence video ! I will order it soon . Thank you for your help sir .

Amazing video. Thank you for your time

Great video, thanks much. Can you use a washing machine spring expansion tool on the front spring?

Very helpful. Thanks for sharing your knowledge

Super helpful.

Good video. However, I just did this repair. Let me assure you, 100% that the top and front do not have to come off. In my case, it was a stacking washer/dryer. It was custom built in to a closet so it would have taken an hour just to get the dryer off and pulled out You just need a 90 degree drill adapter, to get the inside screw clamp off.

Thanks! My washer has a dryer stacked on top so taking the top off is not practical. Why do you have to take off the front? Can the repair be done without removing switches and panel?

Thank you very much, I totally appreciate the help.

Thank you very much

great video ... good tips ... everything was very similar on our washer. thanks again

between 6:30 and 6:55 you missed a MAJOR step... to lap the new bellow over the inner ring

Great video. I replaced my bellows but not the door won't stay closed. If I hold it shut and start the washer it temporarily locks, the tub begins to move but quickly the lock light goes off and the washer stops. I did not have this problem before I did the repair, what did I do wrong?

Thank you Thank you Thank you

Incredible video!!! Very detailed

Awesome! Thank you!

worked great thanks for the show!

Thank you...very helpful!!!

If your hands are small enough. And depending on where the tensioner screw is positioned for the inside wire loop. Its is totally possible to replace the seal without taking any panels off at all.

My bellow adheres right to the washing machine without a clamp. Like it's glued there. Is this normal? It is a whirlpool wfw9050xw03. We just purchased a bellow replacement and cant continue on with the repair because the old bellow is apparently glued to the washing machine? Any advice?

Excellent Video! Thank you. I know I can do it now. I'll be ordering from you right now! ;)

well that makes sense.... i have no clamps on my machine!! i believe the last owner took a shot at fixing it and failed to return parts! my inner stays on but it definitely needs the ring around where the door closes, now i know there is supposed to be a part there ill check with my local appliance guy

I put everything back together, the washing machine is still leaking. Any suggestions?

Boom.... saved me $250

ill give it a try thank you

my maytag epic front load washer has movement when spinning. I open the door and it has lots of play. any idea?

I took my washer apart today and the secondary lip on the plastic seemed to be broken off in some parts. Is this going to effect the washing process or causing leaking issues or is it less crucial ?

Where can I find a replacement spring for the outside seal??

Now my door won’t close! Why won’t it close? Please reply.

What is the name of the plastic part that you pull the tub seal off of?

nice

Hello. I have a Whirlpool Duet that keeps leaking. I have already replace de hose for the soap dispenser and the boot. still keeps leaking. Don't know why??? can you help.

$200 with shipping for this piece of rubber on your website or $73 and free shipping with Amazon Prime,,, hmmmmmmmm which should I order, this same part fits Kenmore Elite HE4 washer as well.

can't seem to find my part number. it's same one but mine has a fill valve at the 12 o clock position. so i would need one that has an extra hole. any suggestions?