How To: Whirlpool/KitchenAid/Maytag Dishwasher Door Latch WPW10653840

Рет қаралды 37,017

Күн бұрын

How To Replace: Whirlpool/KitchenAid/Maytag Dishwasher Door Latch WPW10653840 www.appliancepartspros.com/wh...
Symptoms: damaged, door won't latch, switch has gone bad, the dishwasher won't go through the cycles.
Tools: Torx 15 driver, flathead screwdriver.
This Whirlpool/KitchenAid/Maytag made Dishwasher Door Latch replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, Kenmore Dishwashers: W10653840, W10574864.
Buy the new Dishwasher Door Latch WPW10653840 here: www.appliancepartspros.com/wh...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
DIY Repair Group: / fixmystuff
Twitter: / applpartspros

Пікірлер: 17

@jimmo1949 Жыл бұрын

This video troubleshot my problem and showed me the process to rectify the issue. Thanks for your very informative videos and parts service.

@rockstarrockstargirl 8 ай бұрын

This is what is wrong with my dishwasher, I can’t wait to get the part and fix it myself. Thanks so much!!!

@appliancepartspros 8 ай бұрын

You are very welcome. If we can help you with anything please let us know.

@NMLongshot Жыл бұрын

Just a quick tip... if your door has a operable handle on the front... sort of a lever action handle, you may also have a screw under the handle. Plus, there may be two screw caps on the inside of the door that have to come off once you get the panel off.

@JonnyAbs-0 Жыл бұрын

would you know if your door latch was faulty? My dishwasher runs but I get condensation along the top and sides and it drips down to the floor. I wonder if its latching all the way.

@nathanguest6964 Жыл бұрын

I have the same issue. Did you fix it ?

@JonnyAbs-0 Жыл бұрын

@@nathanguest6964 I still get some but i have been able to reduce it. The shelves were not pushing all of the way back in. I had to push them back a little farther. They were keeping the door slightly ajar. Also, I had to re-secure the cabinet screws by using longer ones. The dishwasher was wobbling around too much.

@millax-ev6yz 9 ай бұрын

I beleive i have nearly the exact same dishwasher. Im in a new place. My last one was from the 80s with the swing bar for latching. I am getting a leak out of this kitchen aide on the left bottom, not underneath. My question is how do i know if it is the latch or the gasket? It doesnt take much umf to close or open the door. The dishwasher does run. I can tell you that with the door shut there is about a 4mm extra length from the cabinet to the lower part of the dishwasher, making the top stick out more and the washer is not plum. Thoughts?

@appliancepartspros 9 ай бұрын

It doesn't sound as if it is the latch. You could be having an issue with the gasket. What is the model number of your appliance and we can take a look into this for you?

@millax-ev6yz 9 ай бұрын

@@appliancepartspros certainly! It is a kdte254ess2 . I ran it again tonight with towels underneath and a paper towel along the side to see if any water wicked in. Tonight it did not. After looking inside the gasket does have some white ish stuff on it, probably from detergent. Another thing I noticed is on the bottom where the gasket bends from the side and extends roughly an inch, it is loose/ not glued down or held in place. This would mate with the bottom of the door. If this is meant to not be loose perhaps it moves out of place when shutting the door making a bad seal? If you have one can you see if that being loose is potentially why?

@millax-ev6yz 9 ай бұрын

To clarify, the gasket is held in place fine along the side. That inch or so along the bottom is not held in place

@crudeawakening2715 3 ай бұрын

I did this the same exact thing. Replaced the old latch with the new one and it’s still the same, the door still won’t close. What seems to be the problem now?

@appliancepartspros 3 ай бұрын

What is the model number of your dishwasher? Have you checked for a damage spring or cable by chance?

@tassoumaate3293 4 ай бұрын

I have the same machine that won’t take the water in. I’ve replaced the door latch, float switch and the water valve. Still no water in. The hose has hot water but the machine won’t take it in. What else am I missing here? Any help 🙏

@appliancepartspros 4 ай бұрын

What is the model number of your dishwasher?

@tassoumaate3293 4 ай бұрын

@@appliancepartspros WDT730PAHZ0. The machine cleans 🧼 perfectly when I add water with a bucket. 🪣

@tassoumaate3293 4 ай бұрын

@@appliancepartspros WDT730PAHZ0. I don’t see any leaks or the hose is kinked. The drainage hose is above the ground. If I add water with a 🪣 the machine cleans and dries the dishes perfectly!