No video

How to Wrap a Full Box Truck! | Behind the Scenes!

  Рет қаралды 5,707

Sticker Status

Sticker Status

2 жыл бұрын

Quick behind the scenes video of a full box truck wrap! Let us know what other types of videos you would like to see in the comments below!
Website: www.stickerstatus.com
Merch Store: stickerstatus.store/
Facebook: / stickerstatusdecals
Instagram: / stickerstatusboise
Twitter: / sticker_status

Пікірлер: 15
@thegirlthatprints8190
@thegirlthatprints8190 2 ай бұрын
Hi, great vid! Any tips to get it laid nicely on the rivets?
@StickerStatus
@StickerStatus 2 ай бұрын
Thank you. The best roller for rivets is the rollepro roller, which you can get at Fellers or sometimes on Amazon
@Ich_slage_dich_in_dominos
@Ich_slage_dich_in_dominos Жыл бұрын
We do that as 1500 drops and you should be able to do 3 to 4 of those trucks day 1 person but then again been doing this for 20 years
@ryandriverhidatsawarrior3034
@ryandriverhidatsawarrior3034 Жыл бұрын
What tool do you use when going over the revits?
@tonimediaGmbH
@tonimediaGmbH 2 жыл бұрын
Did I get this right: you first mounted the side pieces together on a flat table and then put it on the box?
@StickerStatus
@StickerStatus 2 жыл бұрын
Yes, we pre seam them together and lay it all in one piece.
@BigNatureTrucking
@BigNatureTrucking 11 ай бұрын
How much did this job cost to the customer.
@bensims7208
@bensims7208 Жыл бұрын
How long did the complete truck take to wrap?
@StickerStatus
@StickerStatus Жыл бұрын
These generally take about 10-12 hours or so.
@NotMyRealUTubeYall
@NotMyRealUTubeYall 2 жыл бұрын
Can you tell me, how do I UNWRAP a box? We have a box that we need to get an old set of vinyl letters off... SOS
@StickerStatus
@StickerStatus 2 жыл бұрын
This can be a very challenging task, it will generally require a 3M rubber erase wheel, adhesive remover, plastic Razor blades, a heat gun and lots of patience 😀
@NotMyRealUTubeYall
@NotMyRealUTubeYall 2 жыл бұрын
@@StickerStatus NEVER heard of that rubber erase wheel, man that looks MONEY! Thank you for the quick reply. I pealed a lot of the vinyl, but the adhesive separated and is still there. Rubber wheel is the play!
@ahmetcemiloglu7213
@ahmetcemiloglu7213 2 жыл бұрын
When the lift platform is down, the gate is up for loading, and when the gate is down, the platform is up to block it. Why wrap the gate in these trucks? I've seen quite a lot of them. It's mind-boggling.
@StickerStatus
@StickerStatus 2 жыл бұрын
We mentioned that to the customer, they wanted it wrapped haha. Customer gets what they want!
@ahmetcemiloglu7213
@ahmetcemiloglu7213 Жыл бұрын
@@StickerStatus I hear you 😅
HOW TO WRAP A JEEP HOOD!
22:35
Sticker Status
Рет қаралды 7 М.
Box truck wrap installation
11:08
AJR Wraps & Graphics
Рет қаралды 5 М.
Задержи дыхание дольше всех!
00:42
Аришнев
Рет қаралды 3,8 МЛН
Gym belt !! 😂😂  @kauermotta
00:10
Tibo InShape
Рет қаралды 18 МЛН
HOW TO WRAP A CAR HOOD | Custom Carbon Fiber Camaro Hood
24:48
Sticker Status
Рет қаралды 9 М.
The Ultimate Box Truck Buying Guide | Overview & FAQs
27:25
Buying Bigger Better Academy
Рет қаралды 4,5 М.
7-MINUTE HOOD WRAP
7:06
Wrap Institute
Рет қаралды 1,2 МЛН
VINYL WRAPPING A TOW TRUCK IS SO EASY
22:18
Pabloz creation
Рет қаралды 496
How To Install Truck Lettering - Slicks Graphics
8:29
Slicks Graphics Inc
Рет қаралды 48 М.
I Learn How To Vinyl Wrap A Car
18:38
Diymike
Рет қаралды 2,6 МЛН
Box Truck Roller Wrap
7:26
geekwraps
Рет қаралды 32 М.
Задержи дыхание дольше всех!
00:42
Аришнев
Рет қаралды 3,8 МЛН