Beko washing machine not spinning or turning how to replace carbon brushes

Рет қаралды 403,990

9 жыл бұрын

Get your appliance fixed faster! Click the link below to browse our supplier's huge selection of appliance parts and support the channel at the same time! (repairpartsteam.co.uk/index?r...)
Tutorial: www.how-to-repair.com/help/how...
Beko washing machine not spinning or turning this video will show you how to replace the carbons brushes in the motor. This video will show you how to fit and replace new one´s properly to Beko washing machines and all these makes Alpari, Ardem, Arcelik, Altus , Aya, Bravo, Brandt, Bomann, Bru, Bluesky, Continental Edison, Carad, Far, Funix, Linetech, Listo, Proline, Saba, Selecline, Unic Line, Wellin & Westwood, Defy, Fisher & Paykel, Kenwood, Listo, San Giorgio, Venus & Wasco.
Beko Washing Machine Tutorials & Repairs: goo.gl/FwiF0j
Frequently Asked Questions About Beko Washing Machines: goo.gl/g14yyE
Please remember to subscribe to our channel
kzfaq.info?...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-pau...
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
KZfaq. / apart4u
Facebook. / how.to.repair.appliances

Пікірлер: 229

@bingobills 2 ай бұрын

Thanks. your video was immensely helpful. i didn't think I'd be able to fix our machine and was facing a costly repair or buying a new one. i was amazed to see a video with the exact symptoms as ours was suffering. all the steps were very clear and within 24hrs my machine is back up and running. you deserve a beer.

@How-to-repair 2 ай бұрын

Thank you very much for the beer donation. It is much appreciated. It's people like you that help. Keep the site going. Glad you got your washer up and going again again. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be KZfaq superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @bingobills please remember to subscribe to our channel as that really helps us kzfaq.infoe432SAb2g08 Thanks, Paul 👍

@michaellagallon2944 Жыл бұрын

As a 51 yr old woman living alone and not having a lot of money, this video was a god send I’ve managed to fit the new brushes and fix my machine . Thank you so much very much appreciated 😊

@How-to-repair Жыл бұрын

The video is always long, so you actually understand exactly what to do. I'm glad you fixed your machine. Have a great Christmas and a happy New Year. glad we could help you michaella gallon this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@sdm4186 5 жыл бұрын

I appreciate that you put these videos to help people with their repair. I am not that handy and probably won't be repairing a washing machine. However, many years ago my father tried to have a go. It was the pre-youtube age. There was no guide and he was just guessing. I wish he got to see this video!

@bingobills 2 ай бұрын

following these simple, well explained steps, i have successfully managed to repair my beko machine. thank you. beer donated.

@How-to-repair Ай бұрын

Really do appreciate the beer nation not that I can drink them all anymore, but it really does help support the website What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be KZfaq superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @bingobills please remember to subscribe to our channel as that really helps us kzfaq.infoe432SAb2g08 Thanks, Paul 👍

@running4fun863 5 жыл бұрын

Thanks Mr Paul, I am saving up for a big trip and could not really want to buy a new washing machine. I followed your guidance . I listen and watched this twice and I am super happy , I a girl fixed the washing machine and yes I can afford to buy youa beer . I watched several and you were the best . I norminate you for an award. Thanks Paul.

@joaosilvestre1468 3 жыл бұрын

Thanks for the videos lads. It is already the second time that I fixed something learning from to your videos. First the tumble dryer, now the washing machine. Beer paid

@petersseven 3 жыл бұрын

54 year old housewife, delighted with herself for changing the carbon brushes. My machine on spin cycle is music to my ears. Now let me go to that beer button.

@ajbonmg 3 жыл бұрын

I've now used this video twice - 3½ years apart, a reasonable lifetime for a set of brushes. Thanks for your help! :)

@jimpilling1664 3 жыл бұрын

Came so close to throwing out Washing Machine, thanks to you Ive saved tons on a new one!!! Enjoy the beer Paul :J)

@lesliefoster9027 6 ай бұрын

I just fixed my machine with this video. My brushes were stuck back, cleaned them and away it went. Thank you so much 👍👍👍

@radders97 7 жыл бұрын

Just did this repair. It's straightforward and my machine is working again. Cost £9.99. Thanks so much and beer on its way

@adrianstoneman2690 6 жыл бұрын

Best video guide I've seen for this procedure, and it's specific for our machine too! Doing the job ourselves saved a lot of time and loads of cash. Well worth the price of a beer!

@francescoastri4371 5 ай бұрын

Thanks Paul, managed to fix my washing machine thanks to this video. Beer’s on me. Cheers!

@MaryTacomaRehash 9 күн бұрын

Thank you! I'm in the US, and this was so helpful -- not saying there wasn't some physical effort and frustration, but hey, a bloody knuckle and a bit of a sweat (and two new brushes) later, and we're washing again! My old brushes were worn unevenly -- one was well worn down and the other was 3 or 4x longer. I'll make sure it's leveled once I get it back in place because I am assuming that maybe that is the reason for the uneven wear.

@12keys17 2 жыл бұрын

Thank you so much for this. I have a Beko WM6143 (2009) and I have successfully changed the brushes twice in it’s life using this video, the first time about 5 years ago and the second time a couple of months ago ... and so far so good 😊

@kevinmaunsell9474 5 жыл бұрын

Thank you, you have save my washing machine, great tip to replace the casing as the part i ordered didn't fit. My other half thinks i am a hero now thanks to this excellent tutorial. I have donated towards a round. Cheers !

@jaynegordon8680 8 жыл бұрын

Thanks for this video - I'm a mum of three and have just replaced my washing machines carbon brushes with ease......saved my at least £100! Also, some really useful tips throughout! Thank you :)

@How-to-repair 8 жыл бұрын

+Jayne Gordon I am glad I could help you with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your social media timeline & remember to mark us to your favourites. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/KZfaq. kzfaq.info. facebook.com/how.to.repair.appliances

@evamiddleton880 8 жыл бұрын

Thank you Paul! Went from panicking at the sight of the broken washer to having fixed it myself in less than 24 hours. Have bought you a beer, enjoy!

@user-po9sg3ks4p Жыл бұрын

Was it easy to fix 😱

@jaygargan6424 7 жыл бұрын

Excellent video, after struggling for half hour getting the back right hand screw off the motor (not using the correct size ratchet) i finally got there, i realised one of the carbon brushes had worn down saving us on a new motor. I have ordered some new brushes thanks to you for this brilliant video, cheers.

@21dragon15 2 жыл бұрын

Thanks for your video which is very helpful. I fixed my Beko washing machine just before I was going to buy a new one! Best video!

@woowar 7 жыл бұрын

Awesome video - I managed to repair our Beko WME8227W washing machine by turning it up at 45 degrees and accessing the carbon brushes from the back/bottom, unscrewing them to assess damage and without having to replace them (one had just become a little jammed and wasn't springing out properly) managed to make it work again! Many thanks, I have bought you a beer or two! :)

@petekrol 5 жыл бұрын

Big thanks for the video. I was able to fix my beko washing machine by following the advice!!! Much appreciated.

@scouse1967 6 жыл бұрын

Thank you,thank you,thank you so much for your upload.My wife has a BEKO WME7267S washing machine,that uptil yesterday evening was working fine.We she put in another load to wash,the drum wasn't moving at all.I had carried out ALL the test sequence and couldn't work out what was wrong.That was until i watched this video of yours.I took out the 2x motor bushes last night and there was only a small amount of the "Carbon" rods left on them.So first thing this morning off i went to my local appliance parts shop and bought a brand new set of motor bushes.Connected everything back up and the machine is working like a gem.

@samanthazempel5124 Жыл бұрын

Thank you so much for these videos. So far I've replaced the switch board on my dryer and the carbon brushes on the washing machine, saving a lot of money! What a god send!

@samanthazempel5124 Жыл бұрын

I can't seem to activate the 'Buy me a Beer' button?

@chris-hs1yu 2 ай бұрын

My motor also was not turning but the brushes and the DC circuit board were FINE. No error codes. The problem was: The motor connector had broken cables, not visible! But pulling some just ripped them off, they were only attached by their insulation! Replacing the connector by crimping single insulated flat connectors on each cable and adding some hot glue to prevent their detachment fixed it for me.

@kylesmith-wj6js 11 ай бұрын

Just another thankyou for this, machine stopped spinning a couple days back. Ordered new brushes, put them in the old casings and we're washing again!

@How-to-repair 11 ай бұрын

Glad you got it sorted

@floradibao2455 7 жыл бұрын

thanks a million for this video. Water got filled up in the pipe and upon emptying it, the machine could spin again. This has made me to save some good Euros. Thanks again

@chrisbaker4787 4 жыл бұрын

If i hadn't watched this i would have wasted alot of money, only cost me £6.90 for brushes, and surprisingly simple to do, now works a treat, thanks👍

@How-to-repair 4 жыл бұрын

Iam Glad we could help you.if you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzfaq.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZfaq. kzfaq.info Facebook. facebook.com/how.to.repair.appliances

@djappliance 6 жыл бұрын

cheers for the video just unclogged my brushes which were stopping the motor from spinning cheers your a star

@neillpatterson3629 7 жыл бұрын

followed all the instructions now it's working fine thank you

@LouiseBurrows 8 жыл бұрын

Thanks so much for this. Without your video we wouldn't have attempted our successful repair. My hubby is going to 'buy you a beer'. :)

@How-to-repair 8 жыл бұрын

+Louise Burrows Thanks louise i will enjoy it over xmas have a great xmas Paul

@sedatkurtulus9816 Жыл бұрын

Thank you very much for the video save me a new machine in this expensive cost of living time. Much appreciated mate

@Chrom35kull 9 жыл бұрын

Thanks for the video :D didn't know my machine even had a filter. Checked that and a load of metal linings came out.

@rutpunjab 6 жыл бұрын

Your video is very helpful and solved my problem after watching it. Thank you very much !

@nessaa5509 4 жыл бұрын

Thanks! You've saved us 50 quid and a visit from the repair guy during this pandemic.

@How-to-repair 4 жыл бұрын

Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzfaq.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZfaq. kzfaq.info Facebook. facebook.com/how.to.repair.appliances

@josesousa3288 9 жыл бұрын

thank you guys! i'm an engineering student and as soon i get my job i will buy you guys a beer :) :D

@deangardiner7443 5 жыл бұрын

Hi, Paul thanks for taking my call yesterday and advising me on the rinse problem I was experiencing with my Beko washing machine. Removing the brushes freed them off and a clean of the com' did the job, have done two full washes with no problems. Good job! Dean Gardiner

@AntonMSmith 2 жыл бұрын

Thank you so much. I followed every step in this very clear video and we have a fully working washing machine for a £10😀 Such a relief to hear the motor spin :) A beer is already on its way.🍺

@How-to-repair 2 жыл бұрын

Glad it helped and thanks for the beer mate Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@AntonMSmith 2 жыл бұрын

@@How-to-repair Subscribed and working through the back catalogue of videos while the second load of washing is nearly finished. 😁

@rogerfroud300 2 жыл бұрын

Thanks for that, it's a great help. The later versions don't have the rear bolts on the motor, just the two on the front. You can pull the motor off the rear locations. The brushes were too long to fit on my motor, so I had to file them down a little.

@How-to-repair 2 жыл бұрын

I've had that a couple of times I don't know why they don't stick to one holder size

@thomasbaulch8647 6 жыл бұрын

The power of KZfaq! This has just saved me having to go and buy a new Machine, beer on the way to you sir!

@petereverett1455 7 жыл бұрын

My machine had been making metallic grating noises (probably sparking) before it stopped turning. One brush was badly worn, but still in contact with the commutator. I cleaned the commutator with some wet and dry and it started working again. New brushes are in the post while the machine is in bits. You can check whether there is a problem with the brushes/commutator without removing the motor by putting a continuity tester across the pins in the big plug (I used an LED and some batteries). Turn the shaft slowly and there should be no break in the circuit as it turns (the LED stays lit if it is ok).

@user-yf9pg2xb5r 7 жыл бұрын

Thank you very much! So useful video i haven't seen on You Tube! You help me to solve pump problems, and when I make full check I found A LOT of garbage everywhere in and near the pump. Also checked carbon brushes, they was dead. I will buy you a beer with pleasure! Have a nice day. Simeon.

@How-to-repair 7 жыл бұрын

I am glad I could help you with this problem.Please remember to subscribe to our channel kzfaq.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.KZfaq. kzfaq.info Facebook. facebook.com/how.to.repair.appliances

@malikhat74 7 жыл бұрын

Hi Paul, thank you so much for this video - You helped me change my brushes, I bought you a pint, so simple, thanks!! I also subscribed.

@westy6414 3 жыл бұрын

This video saved the day (and my wallet). Excellent work and thank you very much!

@andyhamilton6513 7 жыл бұрын

awesome tutorial you have saved a lot of money, thank you I've also brought you pint on your website.

@anthonybenjamin7118 5 жыл бұрын

I was about to call an "Oh dear that's a big job" engineer, when I saw this. I replaced the brushes and my machine works again. Thanks, and a beer is coming your way!

@robprice1984 Жыл бұрын

You God damn legend! new brushes only a tenner and right before Christmas I'm so skint! Thanks

@How-to-repair Жыл бұрын

Really glad the video helped you save some money, especially in these hard times. I hope you have a very nice Christmas and a happy New Year. Thank you very much for subscribing to the channel. Sorry for the late reply I was taking a break

@Mechkiller1982 5 жыл бұрын

I will get you a beer fella!!!! playing your video as I was taking my brushes out

@weemac1950 Жыл бұрын

Great video covering the exact model of motor that I had in my machine. Just fitted the new brushes today. I actually turned the machine upside down and found it much easier to get at the motor. A little bit of a water leak when all the hoses emptied, but I was prepared for that. Removing the motor inner bolts was fiddly, however I had some flexible socket drives and torx bits and managed to get them out. Replacing the brushes and cleaning the commutator was simple. However I struggled to get the drive belt back on. It was quite cold in my garage so I was worried about getting my fingers nipped. After a number of unsuccessful attempts I decided to use a couple of plastic cable ties (available from Screwfix/Tool station etc) to hold the belt on to the flywheel. I put on two ties securing the belt to the flywheel (2o'clock and six o'clock) and then gently rotated until the belt went on. Reassembled the back panel, turned over, switched on and hey presto the motor kicked into life. Saved a few quid and prevented a serviceable machine from going to landfill. Thanks for all your help

@How-to-repair Жыл бұрын

I'm glad the video helped you not too keen on you turning the machine upside down but at least you got it working. Have a great Christmas and a happy New Year. Thank you very much for subscribing to the channel

@ab_mtb 2 жыл бұрын

Thank you so much, washing machine fixed in time for xmas. Life savers

@How-to-repair 2 жыл бұрын

a pleasure We now have Live Q@A's weekly on our live show, see our home page kzfaq.info for the next date

@timballam3675 Жыл бұрын

Great video, ordered the parts from you and fixed the machine, in the good books with my wife!

@How-to-repair Жыл бұрын

Awesome! Thank you! Thank you For leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@minhashamayim4824 Жыл бұрын

Very good job. I am glad Beko design their machines to be able to fix relatively easy, even the design of these two types of carbon brush casings, the inner part is the same in both and can take one out to put in the other like you demonstrated. They could have designed them to make it more difficult to change. Thank you.

@How-to-repair Жыл бұрын

Couldn't agree more! glad we could help you @minhashamayim4824 this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@danielbaldwin4868 2 жыл бұрын

Absolutely brilliant just fixed mine thank you so much

@derekmay4226 6 жыл бұрын

Great tutorial n really helped me out. Beer bought. Cheers!

@joemac65 4 жыл бұрын

Thank you, very useful and instructive video

@MastodonX26 6 жыл бұрын

Absolutely brilliant. Thank you so much.

@colingill9317 2 жыл бұрын

Great tutorial, thanks. That knocking noise on full spin is that a feature of the Beko, mine does the same, great work keep it up. Cheers.

@andystanway7826 7 жыл бұрын

Hi there. Great video but any idea how to test a fairly new ( couple of years old) Beko WMB series washing machine that has a brushless motor (think it may be an inverter motor). The motor won't run at all on any program and no error code when I put it into the test mode as per your video. Cheers

@skhalil9182 6 жыл бұрын

Hi thanks for such a detailed video very useful. How ever I need some advice on installing the belt. So how many threads on the motor the belt should be from outwards to inwards thanks. Please any help would be grateful

@daffyduck62 2 жыл бұрын

Very clear instructions. Excellent

@PedroJaimeObrien 9 күн бұрын

love this repair

@andrissaldenieks3639 7 жыл бұрын

thanks a lot.my washmashine is sorted now.thanks

@Cadwallen 2 жыл бұрын

Easy to follow guide and also when asked a question on Ebay store got a quick response too

@How-to-repair 2 жыл бұрын

Really glad my video was able to help you and all the staff was able to assist you in getting the correct part for your appliance and remember once a week we do a live stream to assist anyone with domestic appliance problems

@chris30b2 2 жыл бұрын

Great video. I have just removed the brushes. They are totally worn and black carbon dust everywhere . I am hoping the new ones fix the problem of the motor not working and spinning the drum when i fit them tomorrow. Thanks.

@How-to-repair 2 жыл бұрын

remember to clean up the armature, and please remember to subscribe to the Channel as that's what keeps us going in able to make the video smaller

@romoisjuev 2 жыл бұрын

Brilliant video! Thanks for explaining. Very helpful. Greetings from Holland

@How-to-repair 2 жыл бұрын

Glad it was helpful! Greetings from wales

@irisrobinson7322 4 жыл бұрын

Great video as it was exactly my machine and was clear and easy to achieve, machine working again for £15. Trying to buy you a beer but link does not let me !!!!

@malowers5191 4 жыл бұрын

Not gonna buy you a beer yet, but think you may have it sorted, just took off motor and looks like bushes have worn out. Good Man!!

@How-to-repair 4 жыл бұрын

they always help

@drsss1122 7 жыл бұрын

paul thanks a lot keep up the goodwork

@tommyquinn181 4 жыл бұрын

Thanks dude worked a treat.

@danielbradbury4389 4 жыл бұрын

Hi, Superb video, but i may of missed something, when i got the motor of i found that about 5 in a row of the commutator lugs are raised, does this mean i need a new motor, the brushes are fine by the way, but getting a clicking noise when i spin the motor by hand.

@andrewrees9942 3 жыл бұрын

I owe u a beer, should b more tho. Thank u, this video was very informative. Great stuff

@Sooper8 7 жыл бұрын

Many thanks! £10 for brushes fix, rather than new washing machine. Only awkward part prizing motor out (flat head needed for leverage) and then those back 2 bolts out that hold motor, and as you say, the right tools go a long way. Tip for those about to have a go at this repair - wear latex gloves as the carbon deposits are all over the place once you get the motor off.

@stevioAda 5 жыл бұрын

Tip machine back to access the back of the motor and brushes

@rosario8609 Жыл бұрын

Thank you guys!

@kezzaria 6 жыл бұрын

Can you reply with a link to buy the silver extension tool you used during this video. Ive been searching for ages 🙈

@splatuality 3 жыл бұрын

@paul .Brilliant turorial . My washing machine starts to spin does a couple of rotations and abruptly stops .i've checked filter its clear .Pump appears to function okay .machine 100% level . Could it still be a problem with drive belt or carbon brushes ? Any help much appreciated .

@escatel6889 Жыл бұрын

This is an excellent video

@Mates21Vlk 2 жыл бұрын

Moc děkuji. Pomoci tohoto videa se mi podařilo opravit pračku, která přestala fungovat.

7 жыл бұрын

thanks for sharing this with us, thumbs up

@dilanochannel4719 3 жыл бұрын

Tons of beer to be received by Paul....

@jamielodge4662 7 жыл бұрын

I have a Beko WM6167W washing machine what size tools do I need to remove drive and brushes please??

@smarte.r.1450 3 жыл бұрын

replaced the brushes like a pro thanks to you sir.. how do I buy you. beer?

@markymark627 3 жыл бұрын

worked great new set brushes under a tenner, a few probs fitting the belt back, but googled and saw the tip for using a cable tie to get belt back on, also another tip for home diy'ers get yourself a cheap 5 quid t bar screwdriver with torx or pozi bits, makes it easier to undo bolts on motor when you have the leverage etc, and the length of the t bar handle reaches bolts at the back, nice one for the advice, can do washing now ....

@How-to-repair 3 жыл бұрын

@7PK7 4 жыл бұрын

Just helped me out massively! I've sent you a beer or two!

@derekmay4226 6 жыл бұрын

Hi, great, found brushes were faulty, but commutator surfaces look a bit granular. What's the best way to clean them, and if they are deteriorated, what next? Thanks

@friedpuddycatgamer4682 2 жыл бұрын

Hi, I changed the brushes a in dec and in april they had worn out. which obviously isn't normal. I have rebought from another site the exact brushes for a beko machine. I just wondered if brushes could be fitted incorrectly causing too much wear? thanks.

@paulgibbons2320 2 жыл бұрын

This vid has just resurrected my machine for about £6. Thank you kindly. I have paypaled you a beer. One question it is squeaking a bit I'm assuming that will subside as they are warn in. Did not seem to be a lot of scope for changing the angle of the carbon contacts.

@How-to-repair 2 жыл бұрын

Glad I could help it should quiten when warn in. thanks for the beer please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@jaydegreen8629 5 жыл бұрын

Just wondered if not removing transit bolts in error could cause carbon brushes to be worn quickly?

@mehmoodnazir7498 4 ай бұрын

Nice job

@ruhulamin-qh9fz 6 жыл бұрын

Thanks for the making video its save my £300.😁😁😁

@How-to-repair 6 жыл бұрын

Iam Glad we could help you Please remember to subscribe to our channel kzfaq.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZfaq. kzfaq.info Facebook. facebook.com/how.to.repair.appliances

@elyaspatel7002 10 ай бұрын

👏 Lots of Thanx sirrrrrrr❤

@nikolahillman4470 3 жыл бұрын

Hi Paul I’ve just cleared filter and the bushes the machine is now spinning but is louder any ideas?

@starwarscollectionlive...6787 3 жыл бұрын

Question: If the Brushes are worn , would the diagnostic test on the machine still operate the drum spin?

@paraoneproducts3175 8 жыл бұрын

hi, what size is the pulley wheel? thanks

@b5ktas 4 жыл бұрын

Many thanks sir! Beer on the way!

@wembley2011NFL 2 жыл бұрын

Hi. How do i get spare bolts for the communtator bracket. One of them stripped while i was trying to take it out

@southamptonandoperationove7701 5 жыл бұрын

Thank you!

@steveconway24 2 жыл бұрын

Beko machine as in the video, took off the motor as described, and found that the thin insulation strip from the actuator had slipped down so was effectively stopping contact with the brushes. Cut it off, put the machine back together and it works. Question is, is it safe to use?

@benncavey4600 4 жыл бұрын

Absolute legend mate beer on its way.. I will say though that when I tried to take the motor out I didn’t have a star bit suitable, but managed to replace the brushes whilst the motor was in place... missus over the moon no more laundrette... browny points my end I’m basically like a modern day Jesus in my house 🤣cheers mate

@How-to-repair 4 жыл бұрын

didnt get the beer mate but no problem. Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzfaq.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZfaq. kzfaq.info Facebook. facebook.com/how.to.repair.appliances