Repinning Jack Flanges - Piano Tuning & Repair I HOWARD PIANO INDUSTRIES

Рет қаралды 22,461

Күн бұрын

👉Get your free video series on how to tune your piano here:
www.howardpianoindustries.com...
Repinning Jack Flanges - Piano Tuning & Repair I HOWARD PIANO INDUSTRIES
One of the most common causes of sticking piano keys is tight jack flanges. This video shows more detail on fixing the problem with tight jack flanges.
To see all of our instructional videos on tuning and repairing pianos visit our website at: www.howardpianoindustries.com...
👍 An easy way to find past videos along with products and tools tested: www.howardpianoindustries.com...
👉 Click here to subscribe: / howardpianoind
🎥 Video Chapters
-----------------------------------
00:00 - Intro
00:28 - Determining The Causes Of Sticking Keys
01:45 - Repinning Process Explanation
03:20 - Removing The Whippen
04:30 - Whippen Closeup (Whippen Parts)
06:17 - Center Pin Removal
10:06 - Broaching Process & Repinning
⏩ Links and Resources:
-----------------------------------
✔️ Action Flange Screwdriver
www.howardpianoindustries.com...
✔️ Combination Tool Handle
www.howardpianoindustries.com...
✔️ Piano Center Pin Extracting/Repinning Tool
www.howardpianoindustries.com...
✔️ Flange Bushing Broach Kit
www.howardpianoindustries.com...
✔️ Piano Flange Bushing Cloth
www.howardpianoindustries.com...
👉 Follow Us & Stay Connected
-----------------------------------
☑️ Piano Parts, Tools and Accessories
www.howardpianoindustries.com/
☑️ Facebook Link:
/ howardpianoind
☑️ Instagram Link:
/ howardpianoind
☑️ Pinterest
/ _created
👉 Disclaimer (this video is only for entertainment purposes comment)
#pianojackflanges
#tightjackflanges
#repinningjackflanges
#pianotuningrepair
#howardpianoindustries

Пікірлер: 59

@notoriousqueenpigeon 4 жыл бұрын

Mr.Howard you are golden for posting all of your imformative and comprehensive videos, which enabled me to make a sad Spinet I found a completely functioning Happy piano.

@jeroendebruijne5091 3 жыл бұрын

Fijn voor een enthousiaste pianist die een reparatie zelf wil doen. Ik ga op zoek naar meer video's. THANKS mister.

@vigztube 3 жыл бұрын

Very informative. Thank you very much for sharing your knowledge. Much appreciated.

@philfab5 3 жыл бұрын

Really useful and enjoyable too. Thanks so much for sharing your knowledge so thoroughly and clearly.

@howardpianoind 3 жыл бұрын

Glad you enjoyed it!

@amirkohandel 5 жыл бұрын

I'm So happy that you come back

@kodywillnauer9422 5 жыл бұрын

Always enjoy learning from your videos. Thank you for sharing!

@forestsandman 5 жыл бұрын

You’re alive!

@LacedWithOreos 5 жыл бұрын

Hooray! He's back!! :D thank you for your videos~

@howardpianoind 5 жыл бұрын

Yes, I am still here, I just hadn't had time to make videos recently. I'm glad to hear though that the videos are welcomed by most people. I'm grateful that they are a help to those with questions.

@James_Bowie 5 жыл бұрын

@@howardpianoind I'll add my thanks for your returning to KZfaq. IMO, your channel contains the best videos on piano tuning and repair.

@nickitotusek3901 3 жыл бұрын

Thank you so much! I've had sticking keys, A and B flat, right next to each other. I started with your Diagnosing sticky keys video, then moved on to this one. With the parts and description of the parts you have explained so well, I looked again at my piano. Between the A and B flat I could see the flange pin. It had actually come loose from the A Jack and was touching the B Jack, causing both of them to get hung up on the action! I was able to push the pin back in (with a little coercing) and now, for the first time in years, Our keys no longer stick! Thank you for your awesome video!

@howardpianoind 3 жыл бұрын

Great Nicki! One thing you may find over time is that the pin may come loose again because the reason that it came out in the first place was that the pin was too loose in the bushing.

@SatireDaily 5 жыл бұрын

Amazing channel!

@HichemEllouze18 5 жыл бұрын

Excellent and thank you!!!!!

@tharanganishasthri2812 4 жыл бұрын

EXCELLENT ,AND THANK YOU...

@andyj482 3 жыл бұрын

Just ordered a tool from you. Thank you so much for making these videos, it is tremendously appreciated.

@howardpianoind 3 жыл бұрын

Thanks Andy! I’m glad our videos are helpful.

@julieburton2377 3 жыл бұрын

Ty.

@digitalblasphemy1100 5 жыл бұрын

Please keep the videos coming! You're helping so many of us restore our pianos. And a special thank you for your website. I have purchased several items and have been making another list for more. Is there a good place to contact and maybe speak with you about what you offer and my specific needs? I dont see certain items listed on your site and I'm wondering if I can get by without replacing

@howardpianoind 5 жыл бұрын

Hello, I'm glad the videos have been helpful. You can send questions to me directly through the contact form on our website. I'm glad to help in whatever way I can.

@The_Manchester_College_Music 4 жыл бұрын

great thanks again, a loose jack pivot , nearly lost the spring .!

@Proximo011 5 жыл бұрын

FIrst of all, thank you for your very informing videos, I´m not a tuner at all... and may have made the mistake of tuning my own piano (without being worried since your videos are good and my ear is pretty good and I´m very interrested in tuning and maintaining (it's my piano after all ;) )) but your videos explain so much in good detail about everything you talk about, so thank you for that. And what I call the troubleshooting and of course the tuning videos have been most helpful. But, I was just wondering, your online shop, do you send worldwide or is it just N-America?

@howardpianoind 5 жыл бұрын

We do ship orders worldwide.

@NathanMoulton 4 жыл бұрын

Thank you so much for this video! Question: Do you ever re-use the same pin after widening the hole with the broach tool?

@howardpianoind 4 жыл бұрын

It's best not to use the same pin. A new pin will have a point in the end which makes it easier to put through the bushing. If you use the old pin with the point cut off there is a greater chance of pushing the bushing out and then you'd have to replace the bushing felt.

@pauladams9313 3 жыл бұрын

Thank you for these videos! Do you have a recommendation for where to get the pin tool and pins?

@pauladams9313 3 жыл бұрын

I found the tool and the pins on your website. My problem seems to be in the hinge on the hammer butt. Should I replace the bushing?

@howardpianoind 3 жыл бұрын

You shouldn’t need to replace the bushing. You’ll just need to resize the bushing so it isn’t so tight.

@theemeraldadventures3597 6 ай бұрын

Do you know where I can find the broaching tools?

@howardpianoind 6 ай бұрын

The Flange Bushing Broach Kit can be found here: www.howardpianoindustries.com/piano-flange-bushing-broach-kit/

@jimmythetulip4313 4 жыл бұрын

Question: is there such a thing as lubrication that can be applied to the pin to facilitate the travel, instead of replacing the pin all together?

@howardpianoind 4 жыл бұрын

There is a product called Protek CLP that can be used and will help to some degree, If the problem is minimal it may fix the issue, but if it is too tight, then repointing is the only solution. Here is a link to the lubricant in our store: www.howardpianoindustries.com/protek-clp-lubricant-for-piano-action-parts/

@christianwouters6764 3 жыл бұрын

Often sticking flange pins are caused by moisture. The lining fabric swells and at the same time the center pin gets corroded causing double friction. I try first to dry out the fabric with a hair dryer and apply a little bit WD40. Only if this doesn't work I will take on the ungrateful job that you describe. 7 hours of tedious toil...

@maggiejetson7904 3 жыл бұрын

Are piano jacks all the same? or are they unique between different keys? For a not frequently used piano is it possible to swap jacks between keys to keep them worn evenly?

@howardpianoind 3 жыл бұрын

They are all the same, but the reason that they get sluggish isn’t because of wear, it is because of humidity changes.

@greglivingston538 3 жыл бұрын

I've always wondered; as the jack moves, does the pin rotate along with it? Is the pin held tight by either the jack or the flange so it rotates in the other part? or does the pin rotate equally inside both the jack bushing and the flange bushing?

@howardpianoind 3 жыл бұрын

The pin rotates with the jack as it stays held tight in the jack and pivots in the bushing which is in the flange.

@thomaslau9631 4 жыл бұрын

I guess this is why Renner is the company that produces a whole set of Action for individual piano. This is not for layman and it is easy to make a mess after working on the 88 keys.

@matt-gq2rn 5 жыл бұрын

I have a question, how long on average does it take to get familiarized with all the action parts and functions as a technician and knowing how to repair them? also good to see you back!

@howardpianoind 5 жыл бұрын

The time to learn everything greatly depends on how much time you devote to it and what things you're doing to learn. Hands on experience is the best, so getting a piano that needs some work just to get some experience is a great way to get hands on learning. If you can attend training seminars through the Piano Technicians Guild you can get a lot of training quickly. Even attending local PTG meetings can be a good learning experience.

@grxengine6188 4 жыл бұрын

Well, I saw you remove the whippen here on this upright, but how do you remove one from a spinet drop action?

@howardpianoind 4 жыл бұрын

It would basically be the same way, the thing about a spinet action is that it is more work to get the action out and of course the fact that you have an elbow and lifter attached to the whippen.

@warzone147 5 жыл бұрын

Hi Howard , i have a question , a few days a ago , the piano in my room started making sounds on its own, mostly in the higher octave area, it sounds like something is tucking or plucking the strings however the keys does not move, i have opened up the piano thinking there's little unwanted creatures that managed to get in the piano however it came up empty, is there any particular reason ? This problem only occurs when i turn on the air conditioning during the night.

@howardpianoind 5 жыл бұрын

It's hard to tell. It could be that there are critters in your piano that are hidden when you open it up, but it's hard to tell. I'm not aware of what might cause this.

@warzone147 5 жыл бұрын

@@howardpianoind Thank you for taking the time to reply ! i got to admit it did scared me at first , guess its time to tune the piano.

@AlecArmbruster 2 жыл бұрын

It could be wood loosening and giving way to a fracture. Or… a mouse!

@leewmlee Жыл бұрын

Would putting dry graphite lubricating powder inside the moving pins/holes reduce wear in the holes and make the repair last much longer?

@howardpianoind Жыл бұрын

Protek CLP is one lubricant that is used to coat and ease the bushing cloth. It also helps expel moisture. So, yes lubrication can be used here . I think I have seen flange bushing cloth inpregnated with dry gaphite sold for rebushing flanges, but it is not the common lubricant used in this location once the hole has the bushing cloth already installed.

@leewmlee Жыл бұрын

@@howardpianoind thk u!

@duck_fx 5 жыл бұрын

hi,how to fix damper that dont go up when i press a key???its sounds so terrible

@howardpianoind 5 жыл бұрын

It could be that the damper lever is broken.

@James_Bowie 5 жыл бұрын

What make and model is that action from?

@howardpianoind 5 жыл бұрын

This action is from a Kimball console piano. I’m not sure which model exactly that it is though.

@James_Bowie 5 жыл бұрын

@@howardpianoind Thanks.

@rubarb0406 4 жыл бұрын

Steve, did I miss something? When you replaced the pin, I did not see you install felt bushings . . .

@howardpianoind 4 жыл бұрын

In most cases you don't have to replace the bushing. The only time you should have to replace the bushing is if you push the bushing out or if the bushing is damaged.

@rubarb0406 4 жыл бұрын

@@howardpianoind Steve, thank you for the response. My situation is a little different than the sticky or sluggish flange. The plastic/bakelite parts in our piano broke at the weakest point. . . i.e. the pivot points in the flanges. The replacement flanges I have purchased from you do have the felt bushings. In addition, I did find another of your KZfaq presentations where you show details for generation of felt bushings.