Hey Tony I'm looking to purchase a decent gun can you send me a link that you would recommend . Thank you
@HowToPaintYourCar3 жыл бұрын
Look into the ATOM X27 also comes with a free GunBudd light system. zoolaa.com
@AiRGuNNeROriginal3 жыл бұрын
I've done some autobody, but never painted. My three biggest takeaways were at -20:45 spread filler for both directions to reduce pin holes, -16:37 don't tack between clear coats or single stage enamels and -8:47 unmask before the paint is completely cured. Love the vids Tony!
@HowToPaintYourCar3 жыл бұрын
awesome! Thanks!
@haynkokanut2 жыл бұрын
Shout out to the 808!! Love your vids, very informative and inspiring!!
@punkinsgarageandpaint82993 жыл бұрын
This is what I got, just close you eyes and feel the entire surface, dry sand with 400 grit before paint always use hardener in enamels. Also for a bonus 1.8 to 2.0 tip for primer. Love your videos. You are a great teacher
@HowToPaintYourCar3 жыл бұрын
Nice man great tips love it thank you!
@sierra117s1173 жыл бұрын
The top five takeaways from this video I had started with the difference in coverage between the 1.4 and 1.8mm tips on the different guns. Secondly, listing the grit of sandpaper you used and all your tools was very helpful. Thank you! Third of all, the flashlight mounted on the gun is extremely handy, and I like that you show the POV painting experience so that I could see exactly what movements I need to make and how to flow with each pass. I appreciate all the vids and I highly recommend the VIP purchase. It’s absolutely worth the money. You taught me how to do paint and bodywork for $55. Thanks for everything Tony and keep up the awesome vids!
@HowToPaintYourCar3 жыл бұрын
thanks for watching, Ryan!
@dawo1ne3 жыл бұрын
0:51 Plasti dip trim pieces. Genius😁 Not even a full minute into vid and already learned something. You guys are good!
@dawo1ne3 жыл бұрын
My comments are prob late, but good info is valuable so, time well spent.
@HowToPaintYourCar3 жыл бұрын
Awesome! Thank you!
@xiongsautodetailing1693 жыл бұрын
3:23 - feel with your hand without gloves to feel for even or uneven surface. Close your eyes to help. 4:40 - use 1.8 spray gun tip for more even primer. 14:10 - unmask after 2-4 hours after the paint job. Before complete cure to prevent paint peels. Thank you Tony, always learning from your course and videos. VIP - Wisconsin
@HowToPaintYourCar3 жыл бұрын
thanks for watching!
@brettshannon18213 жыл бұрын
my first take away was at 9:09 i learned about how to correctly prepare raw plastic with bulldog adhesive promoter , my 2nd take away was at 14:12 i learned that i should remove all maskin tape within 4 hours of painting the vehicle , and my 3rd and last take away was at 16:24 i learned how to apply raptor linner on a vehicle . over all i thought it was a very informative video and i will be subscribing to your site and i did give a like and will be sharing it on my facebook profile thanks guys great job .. peace ,Brett
@HowToPaintYourCar3 жыл бұрын
thanks for watching!
@dawo1ne3 жыл бұрын
7:22 Good to know you CAN still add hardener even though they say you don't need it with certain products. Most people will not give you that bit of info when buying.
@HowToPaintYourCar3 жыл бұрын
thanks for watching!
@floridacustomfab27833 жыл бұрын
Excellent video, with so much information! 3:25 Using bare dusty hands to feel for dents or uneven spots. 9:30 Correct way to paint plastic bumpers adhesion promoter/prime w/ primer filler/ sand then paint 18:33 when cut/buff on dark colors you should use 3000 grit! As always outstanding videos/information...the kind that builds confidence in the student that they can do it too!
@HowToPaintYourCar3 жыл бұрын
thanks for watching!
@gavinsigamoney4393 жыл бұрын
DAMN!! SO MUCH CONTENT IN SUCH A SHORT VIDEO😎 GREAT NEW Techniques ive learnt were: @ 1:51 The use of fibre filler to fill big rust holes and dents. @14:24 The importance of removing masking tape before the paint is cured. @14:36 that plastic headlights can be restored to brand new shine by Sanding with 800grit and spraying with 2 coats of clear. @18:21 learnt how to use fine line tape for graphics and that blue painters tape is suitable because it doesnt stick so strong and is removed easily. @21:21 learnt that any decale can be turned into custom to suit your personality. TONY B the Crv looks wicked my bro ,Awesome work buddy. I bet anyone who watches this will be able to bang out a fanatastic job just by using techniques from this video when spraying their ride😎😎😎
@HowToPaintYourCar3 жыл бұрын
thanks my man!
@mattc97612 жыл бұрын
Awesome job man. Thanks for the tips
@yungstuntslayer3 жыл бұрын
I don’t have the courage to attempt this on my own but this was super entertaining to watch , i got the same year and model. Really thorough work brother.
@HowToPaintYourCar3 жыл бұрын
thanks man!
@ricktruesdail5783 жыл бұрын
Hi Tony, I just watched your video and it's great. Here are my three takeaways. 7:20 I learned that it is important to use a hardener/activator for enamel even if you are told it's not necessary. it will give you a harder finished product. 1:50 I learned not to overwork the filler and and spread in both directions to reduce pinholes. I would usually over work the filler trying to get rid of the pinholes. 13.07 keep laying the paint down until it's glossy. The GunBudd light really shows the gloss.
@HowToPaintYourCar3 жыл бұрын
thanks for watching!
@BasicFolders3 жыл бұрын
AWESOME video! Painter or not, these are soooo fun to watch. And if you have a project you want to do (like me) it shows you how a really nice job is within the realms of possibility.
@HowToPaintYourCar3 жыл бұрын
thanks for watching, Chris!
@fsl4346 Жыл бұрын
WOW! Love the work. Seriously considering trying a single stage on one of the cars. Just to try it out. Has some serious gloss to it.
@HowToPaintYourCar Жыл бұрын
Thanks Man! Go for it Man! Get a free training on RADS Paint Formula www.radspaintformula.com/rads or you may Check out the LearnAutoBodyAndPaint VIP Program to learn more about DIY auto body work and paint vip.learnautobodyandpaint.com/home
@gordonbartholomew77333 жыл бұрын
Ok 11:40pm I watched the video in the above link and it was awesome and amazing to say the least. I learned about feel and I was amazed at how closing your eyes and running your hand over the car you could feel the high and low spots . Also I learned about painters tape and how to use it for painting projects so when you peel it off the paint it wouldn’t not damage the paint. Also I learned about the different tips such as the 1.8 to 2.0 is great for primer and the other Guns above that model are for spraying the paint. Wow I learned a lot from this awesome video and keep them coming. Thank you and I hope I’m a winner well either way I’m a winner because I learned a lot from your videos. Awesome job Tony! You make it look so easy. Gordon
@HowToPaintYourCar3 жыл бұрын
thanks for watching!
@89crix3 жыл бұрын
Brah looking good
@HowToPaintYourCar3 жыл бұрын
thanks for dropping by!
@zzawoignatius32263 жыл бұрын
I really need to get into these.
@tatialo373 жыл бұрын
Wow! Looks nice! Mine is black! I want to paint it camaflage!!! Or like a cow!!!
@troyjustet83153 жыл бұрын
1:17, The eraser wheel is something I haven't seen before. I will have to get one and try it. 5:34, It's good to see that I'm not the only one who gets imperfections when spraying primer. If Tony gets them also then I'm not doing so bad. 14:35, Good tip on hot to fix foggy headlights. I will try this on my wife's car when I repaint it later this year.
@HowToPaintYourCar3 жыл бұрын
thanks for watching!
@Boeing767DriverAA3 жыл бұрын
Well Tony another great video .....I missed out before when you offered a Free shirt..... 1. @ 2:07 - 2:13 when mixing body filler 8-10 drops hardener for every golf ball size filler.... (I always screwed this up either too much or not enough? 2. @14;04 - 14.35 masking tape should be removed 2-4 hours after painting to be prevent the paint coming off with the tape if you wait too long... 3 @14:35 - 14:45 I learned something new sanding head lights with 800 grit SP and then 2 coats of clear to make them look like new....... Tony I dont know if it was just the angle of the camera but it looked like who ever was spaying the color was about 3 or 4 inches away from the body ...Maybe you can clarify?? If I dont win a tshirt this time around I could sure use a gunbud I wont paint my next project with out one....
@HowToPaintYourCar3 жыл бұрын
thanks Terry!
@dennyvortman19903 жыл бұрын
(2:06) "Use 8-10 drops of hardener for every golf ball size of filler" (12:58) "4 1/2-5" is where you want to be when spraying with your spray gun", (14:14) "Important to unmask car 2-4 hours after painting to avoid peeling"
@HowToPaintYourCar3 жыл бұрын
thanks!
@dawo1ne3 жыл бұрын
11:25 Good to know 80gallon air compressor is big enough😉. Thanks guys. Will be watching a little more often, especially when I get a gun lol.. Don't have one yet😒. Only for houses.
@HowToPaintYourCar3 жыл бұрын
grab your Atom Spray Gun on Zoolaa here: www.zoolaa.com/ thanks for watching!
@charlescarter10973 жыл бұрын
23:15, Body filler 8 to 10 drops to a golf ball size, I cannot see those drops I like using the paste and I use all-metal body filler. 23:30, I have several spray guns and I have a 1.7 for high built primer so 1.8 to 2.0, 23:40 I always use primer on a plastic bumper. But being 66 my eyes not as good as they used to be.
@HowToPaintYourCar3 жыл бұрын
thanks, Charles!
@1974dodgecharger2 жыл бұрын
Cool
@cornholio7773 жыл бұрын
Love the color but you should have painted over the original brown color area..Lil too much black on the sides!
@zanaga19013 жыл бұрын
Tony do I have to go to school to be a auto detailer because I rather just do auto detailing working for myself but would need to get more experience under at it because I want to be working for myself before 50 so 8 years from now I know I actually really like auto detailing but never had a job working for a place that does auto detailing yet but have looked at jobs that do. Plus have went through a lot more jobs since 2013 and I know for a fact I really want to work for myself and I see am ready for it now.
@wubbieish3 жыл бұрын
Hey Tony new VIP member here haven't had a chance to attend one of your Q and A live videos but have a question. What are some good places/websites to get inexpensive single stage and 2 stage paints? Thanks!
@sierra117s1173 жыл бұрын
Following
@HowToPaintYourCar3 жыл бұрын
hmm good question. But I usually just browse the internet or check local paint shops
@LebronJames-fp3xq3 жыл бұрын
What are those rims called? Great job!
@diego714mag63 жыл бұрын
Should I wrap it or paint it??
@jofilmz6933 жыл бұрын
How much would you charge i get one 2008 honda crv i want to repaint thats why
@mreightytwenty87093 жыл бұрын
This is why car painters charge so much...there is alot of work spraying a car. I know.....You Tube makes it look so easy...LOL
@HowToPaintYourCar3 жыл бұрын
lol. Anybody who has the will can do this. It's not ROCKET SCIENCE lol.
@mreightytwenty87093 жыл бұрын
@@HowToPaintYourCar I know, but it takes alot of work.......and many hours of practice...I know
@Darokki2 жыл бұрын
Lift kit?
@slikksmg Жыл бұрын
Is this lifted?
@crex1611 ай бұрын
Before primer do you have to degrease the car?
@HowToPaintYourCar10 ай бұрын
Hey Man! Yes, before applying primer to a car's surface, it's crucial to thoroughly degrease and clean the surface. For A-Z step by step process and free trainings join our LABAP VIP Program vip.learnautobodyandpaint.com/home
@crex1610 ай бұрын
@@HowToPaintYourCar thanks a lot, you have great content
@nicolasld5003 жыл бұрын
Hey dude. I liked the vlog a lot! You have to really work with Bad Friends. Their vlogs are like David Dobrik and Faze Rug. They are an insane friend group in California. You should totally check out their KZfaq out and give the group a like! 👉 #FreeRealBadFriends