Thank you so much. I am a 73 year old lady and I just got a brand new smart phone. Your suggestions are excellent, especially using Scotch tape as a hinge. I didn't get me screen protector on perfectly (a few small bubbles) but I can live with those. You can only see them if the screen is completely black. Thank you again for ou very kind and helpful suggestions.🧡💛💚

Installing a screen protector used to feel like brain surgery before I watched this video. Your instructions were perfect. There was a scary moment though when I noticed in the corner of my eye my cat was staring at me the whole time waiting to pounce on the screen and get her fur in there just before I pressed the screen protector. But, she behaved.

Very helpful video. Some suggestions: - As you lower the protector, push 3 spread fingers from your spare hand against its hinged edge. This prevents the edge of the protector from raising slightly and shifting. With this technique, there is no need to use a stickier tape. The provided sticky tabs work well if you do this. - When making minor adjustments, the provided sticky tabs are easier to adjust than very sticky tape. - Before removing the protective film, practise the folding technique repeatedly, until you are certain that you are doing it correctly.

After taking my phone to a shop for years when it was time to refresh the glass, I decided last night to remove the tempered glass on my own and install a new one. I watched several videos, but I was still hesitant to give it a go. Until you saw your video suggesting to hinge the screen on one side with tape. I am so pleased with the result. It's absolute perfection, far better than the shop installation that was always acceptable but had a little bubble here and there. Thank you so much!

First, thank you SO MUCH for not trying to be "cutesy" or long-winded with the intro...no one likes that, and you got straight to the point. Second, you are extremely well-spoken, concise and meaningful; what you said and pointed out made absolute sense and was very easy to follow. Whatever you do or your career aspirations are, you make a great speaker, trainer and presenter. Well done here. One slight hack: rather than making multiple "hinges" with the tape, apply it LENGTH-wise (not width wise in several places) and you'll get a much better/solid "hinge" as well as a better gauge on whether or not you've aligned it well (the tape will becomes your guide).

This was very helpful. I'd only add "make sure you have a bright picture on screen so you can check alignment really easy"

I did it, I put my glass protector on my phone. Went great and that is because of your great directions. Thank you!!!

Very helpful to encourage people to do it by themselves. I had change mine at the mobile store the price with 5 times more expensive than the real price of the glass screen. Thank you for the clear demonstration without wasting time.

Tip: make sure your phone is powered off when you do this so no one calls you or texts you potentially messing up the process

Thanks for your walkthrough, dear sir. Installing glass is always terrifying (what if a speck of dust remains under the glass forever, what if it is 1 mm off, what if, ...), so your video made it much easier for me.

This actually was the first time ever I tried to install a Screen Protector. I went from the video to our two phones following directions to a tee. I did good and actually surprised my wife. Today was a good D A Y. Just follow the instructions and you shall succeed. Have fun and good luck.

this was my first time installing a glass protector, i usually have it done by the people who work at the place i get it from and this video was endlessly helpful, i managed to flawlessly do it to mine and my mom's phones!! thank you so much, this is the best tutorial ever

That was an excellent and detailed demonstration. Well done. Thank you and best wishes.

It is an excellent demonstration and it is greatly appreciated by someone brand new to this stuff. Thank you.

Just followed your steps, it worked perfectly, thanks for that!❤️

I have just put mine on by following the process. In a few seconds it sticks automatically perfectly without any bubble. One more tip - I folded a bit of the edge of the tape so that it's easier to remove from the protector.

Very helpful. The cover didn't come with any instructions!!! Your video made it all easy and doable. Thanks!

As an ex teacher from industry who has taught Physics and CDT to kids and novice teachers it is an absolute delight to find a KZfaqr who actually knows how to present properly, very clear, nice touch with the tape, warm enthusiastic voice and considering in the past with two older mobiles made a right mess of things, now feel very confident of doing it properly. Will certainly now look to see what else you have on here.

Great idea using the tape. Worked flawlessly and not one little bubble to contend with.

Thank you so much for the tape trick ❤ I made the hinge, cleaned the screen again, peeled the tab off & let go with my eyes closed 😂😂 opened my eyes & it was bonding to the screen with no air bubbles 🥳🥳🥳 I will tag this video in my Amazon review as a reference.

Thank you so much as long as I have been using tempered glass I always messed it up for the sheer fact that I had no idea what the guide stickers were for and finally this time my tempered glass is on without dust spots inside and aligned perfectly! Thank you for this video!!!

Thanks so much for clear and easy to follow instructions, I never knew what those guide strips were for before!

Thank you. The trick of using the tabs to hold the glass straight really helped.

This is hands down the best video I've seen so far on how to install a screen protector. No other video mentioned using tape or stickers as hinges. They kept going on about steam or some other convoluted method. Thank you!

First time putting one on...no telling what sort of cluster-jumble I would have accomplished w/o your video. In the end, it came out perfect! Thanks!

I watched the video link that came with my screen protector, but they talked too quickly plus some extra implements for application were used that I didn't get in my package so it was confusing as well. You present a very friendly helpful video very suited to the middle aged+ crowd. Thank you.

Excellent job .For the first time I have put my screen guard perfectly!!!!Thank you so much

Thanks so much! Your method works well! Did not see the black part forming for my particular protector screen, but no bubbles: the protector screen fitted perfectly in one go.

I ended up just dropping it on there, lol! But thank you for the instructions! I have a one year old who wasn't trying to let mommy hold the phone that long without his help. 🤣♥️

This is always a very challenging thing to do. I didn't know how to use the tape or sticky guides, so thank you

Simply the best video.! Good on you for keeping the instructions simple

The tape hinge thing is a really cool idea that was missing on the instructions of my package. Installation was a breeze with this. Thank you.

Great video, excellent tip with the scotch tape too. For the bubbles you could use a kitchen rolling pin(very gently of course), or buy a dowel frome depot or Lowes before starting another screen protector job.

Thank you. I didn't know what was the "guide stickers" for. So I just installed the protector without them 😂

Hi Geo, thank you so much! First time I ever installed a screen protector! Total success with using tape!👍🏻👍🏻👍🏻👍🏻👍🏻

Thank you so much for this. My kit did not come with tape to hold it in place, so it is great to know that I can use regular tape to do the job.

Excellent instructions! I had zero bubbles to push out.

Thank you! I thought I had destroyed my last screen protector when I removed it to get a speck of dirt off. Washing it and drying with a hair dryer worked! ❤

Just did it perfectly without a single bubble, thank you !

Perhaps masking tape e.g. the blue 3 M painters' tape would work better for the "hinges"? I know some of the screen protector companies supply a model specific plastic frame to ensure proper alignment of the SP and phone screen. I just used one with on my Galaxy S8, and it was the least troublesome installation I've had and no bubbles whatsoever.

Finally had to find a vid after fighting the remaining protector I have to not have all these weird dirt specks under it. It makes me so mad. Broke down and ordered more. Better study up for the big test! The hinge is genius. Can’t believe I didn’t think of that in the battle of the screen protector today.

Wow, I just used your technique and I'm amazed at how well it works... 👌☺

Installed tempered glass on my phone for the first time. Thanks for sharing this helpful video!

This helped with a Wii U screen protector (not even tempered glass) that came with, of course, no instructions. Thanks!

Brilliant thanks so much, I've never had much luck installing these things, now I'm confident I can get one onto a new FitBit Charge 5 with a curved face I've kept in its box for the last week (a gift I've been cautious of defacing before getting the screen protector on it) it really did help me out, I really did enjoy it, I've given a thumbs up and subscribed as requested, thanks again!

This is a very clear explanation how to put on the screen protector. Very cleaver way to use the tape. Thanks so much. I am glad I found this video!

I had tried this method and it's 100% working!Thank you!

Thank you so much. I've never gotten one on before, worked great, not one bubble.

@5:30 when you have problems with pealing the plastic: use the same trick as with your hinges to create handles to hold the protector instead of trying to do that by holding the edges; so your right hand will hold the sticky tape (which has been attached to the top part of the protector) and you will use your left hand to peal the plastic off from the bottom part of the protector; this way you will guarantee that you will not touch the protector’s bottom surface

Excellent idea to tape screen to form a "hinge". Works great!!

You are a damb genius Gump! You will be a 4 star general one day...outstanding!

Thanks for this video. Managed to install the protector without any issues!!!

This was an excellent video demonstration. Thank you so much. One question : do you have a method to remove scratches from the mobile screens ? Thank you for your reply .

Applied an iPhone 12 glass protector following every steps in this video and it came out flawlessly

Best video ever, no bubbles. Perfect!!

Thank you, followed your instructions and it's flawless!!

First time my cover came out flawless! You’re definitely a screen saving boss!

Wow! I didn't have a single bubble. Thank you so much for the advice!!!

A super helpful video! Instead of tape for the hinge, I used a 1" x 3" Avery Multi-Use label. Since it's more rigid than tape I had no worries about anything shifting when I opened the hinge. I was able to fully open it to remove the backing and everything was still perfectly aligned when I closed it to install. Since the labels are removable they came off easily when I was finished with no residue. I also used a piece of one to make a little "handle" on the opposite side so I didn't have to touch the glass to move it.

Thank you! Tape is the way to go to hinge I applied mine perfectly for the first time ever, proud moment! The little things. Thanks again!

Lots of big tape as sturdy hinge on other side of pull tab was super helpful. Thank you.

This was perfect! Great video. I still ended up with what seems like a tiny flaw/bubble thing - bu nothing compared to the old cracked screen protector I replaced. Feels like I have a new phone 😂- but, no, it's pretty old, it just looks great now.

creating that line in the middle with my finger makes it perfect. thankssss

Thank you for your video! I have a perfectly placed, bubble free phone cover. The tape is an awesome idea!

Very useful thanks. I used a spectacle wipe on the screen to make sure it was really clean and static free and proceeded as you described. It went on completely bubble free after couple of minor relifts at corners. There was still a trace bubble line round the edges but working my finger round the edges removed it. One hint to newbies, check which edge your tab is on. Mine was on the opposite side to this product so I had an 'Uhh! moment and had to put the hinge on the other side.

This worked like a charm. I am so happy I checked you out, saved a lot of money.

Thanks so much for this, super helpful and you explained it so well, my new phone is protected and doesn't have any bubbles!

I tried this and it worked no bubbles. Instant subscriber.

This helps me to do with perfection. Absolutely no bubbles.

Great video thanks for being thorough - Realizing we are looking for a video to help us do something that we may be completely clueless on what we are doing

I've only installed one screen protector and it didn't go well. LOL Never tried the hinge method. It worked great!! Thanks

Thanks for the tape hinge idea, 🙏 I was dreading to even start the installation bubbles

This technique worked perfectly. I used to try to go from the bottom up but the hinge method is much better!!! I got absolutely no bubbles! Thanks for being so thorough

I went to APPLE store yesterday and asked for help putting my new protector on thinking since I spend $$$$$ there they would be helpful. NAH! You have to overpay for a protector for them to help!!! So here I am, thanks this is very helpful. I feel like your steps provide the safety net I need to be brave!!! Do you have a video on taking off the old screen?

I ended up with a spot that does not want to disappear, it happened as the glass hinged down and started sealing towards the far edge and trapped air near the lower center of the screen.....of well. good instructional video, I had no idea it would be this involved.

In my experience, alignment is easy, I don't have to use the 'hinge' technique here. It's getting the phone clean enough that's hard, especially if you're using plastic screen protectors where any dust particle will product an ugly bubble.

This was so helpful. Just put on my new glass and it worked perfectly. Thank you

Awesome advice just bought a really nice promotional cell phone bad thing is there's no accessories available yet other then what come with the phone so only one screen saver most don't get it right the first time including myself however your video helped me ace it the first time and no bubbles either . Thanks my friend

Thank you so much. I used your guide and feel like a professional haha. It worked perfectly and I don't need to waste money anymore for someone else to do it for me 😀

Thanks very much for this. New iPhone SE2022 the screen of which I want to keep clean and scratch free. The kit I bought has three protectors. I used disposable latex gloves in order not to transfer any unwanted deposits … well worth it if you can work with gloves - you can remove them to peel off the hinge tapes.

What an amazing video!!! Worked perfectly following your instructions. Thank you

This method works great, it would be hard to foul up, installed mine with no problems at all...Thanks good video.

It's very helpful! Thanks a lot. ❤️

I two times before and i fucked up every time. I tried once with this method and it worked perfectly. No bubbles. THANK YOU !!!

Great walkthrough! My first time applying tempered glass went perfectly after watching this tutorial.

Very helpful! THANK YOU.

Never tried these before but just found the same ones on eBay, thank for the video.

Your video was very helpful..thanks a lot!

Thank you. It worked perfectly!!

Thank you for making this application so simple.😊

You are an absolute lifesaver🙏 this is the best I've seen yet on how to do this, it worked amazing! What an great idea- thank you so much!! And for whoever gave you thumbs down on this video smh I don't know what's wrong with them because this was the best ever for me and I tried every thing and can never get these darn things on 😆 Thanks again!

Worked like a charm, great video!

Thanks for an informative guide to apply the screen protector!

It has been 2 years and this is still such a helpful video!!! when I was trying to place a screen protector on my tablet but had no idea what the tape it came with did this video made it so I didn't goof up at all!

Really helpful video! Most don't give you the tape hint which made all the difference because, just as he states, the strips included in the box don't hold. Some of the videos don't even talk about taping. It's just drop the glass (and pray for the best).

Thank you, thank you! Your instructions were sooo much clearer than those that came with the screen protector. We nailed it on the first try! =D Have a BLESSED Christmas!

I attached the tape the the bottom and liked that method more. Thanks for the video though!

Thanks this was so helpful

Helpful, thankyou.

Awesome video, screen protector now on phone without bubbles, really practical tips, thanks