THANK YOU, YOU MADE A OLD MAN HAPPY, I DIDN'T HAVE TO CALL MY NEPHEW. I LOVE THESE NEW TOYS, BUT ALL I CAN DO IS TURN THEM ON AND OFF. THANKS AGAIN,🌴

FINALLY!! a video that ACTUALLY shows how to use the guide stickers! haha THANK YOU!

My whole life I’ve never knew what to do with those stickers that came in the box, now I do. Thank you!

WOW. By far the BEST vid out there to do this. I was nervous to do this but mine turned out better than I could have expected. I have the XR but your demo was all the same. If you don't have an extra guide sticker, fold up some scotch tape and use it in place for the guide sticker on the right side (to lift up the protector). I also used a flashlight to look at the screen... Glad I did because you don't always see everything in plain light.

Finally a proper explanation on how to use the guide stickers. Thank you very much.

Everytime I buy a new phone I always come back to this video for guidance thanks so much

Yessss 😃 Thank you very much. I was struggling with this and I messed up twice before this amazing tutorial instructions. I just putted the screen protector on my iPhone 8 Plus and perfectly 👍

Just want to say a big thank you. This is the best video I've seen so far on using stickers to place a screen protector on a phone. I did it your way and it came out perfect thank you.

Omg so i never knew how to use the guide stickers and I got the iPhone pro max and I could never put it on without air bubbles. This video helped so much. Thank you!

The BEST tutorial I have watched for applying a glass screen protector. For the first time in years I have managed to apply a protector with NO bubbles whatsoever. Mine went on exactly as per this video with the large air bubble just disappearing to the top of the phone's screen on it's own. Brilliant. Many thanks.

Though this video is 4 years old, it's still easy to follow and ON TARGET. The brand I used had an installation video, the same wipes, and a sticky label to remove those tiny particles. (Look at it after using it. I was surprised at how many tiny specks it lifted!) Their video, however, didn't show me what to do with the guide labels. After watching it twice, I realized that instructions for them weren't going to magically appear. 😅 Fortunately, this video was just below. My hands are very trembley, and knowing how to use the guide saved me $10 to pay someone else. Thank you! I now have a new skill.

This video was a great help to me. I was able to put my screen protector on all by myself watching this. It came out perfect just like in the video.

Finally a video that explains what the stickers are for, thank you! It is a very good idea to put the third on the other side to lever, it avoids fingerprints under protection.

Oh my god! I followed your tutorial and I was able to properly to put my screen protector on! No bubblesss ❤️❤️❤️ love you!😆

You're a genius! Thanks! I couldn't fathom what the stickers were for! 👏👏👏👏

Thank you I watched your video a couple days ago for help putting on my iPhone 11 Pro Max. Plus the guided stickers for lifting the glass helped was a great tip... Cheers! 😁👍🏼📱

Thanks for being the ONLY video (at least the only vid that I found) to explain the "Guide Stickers". I subscribed just for that.

Always love watching your videos, very informative. Keep putting up these great videos.Thanks.

I have a pixel and this worked for me too. Also this video was 100x more helpful than the video the actual company made. So thank you very much. 👍

THANK YOU. I was working to remove bubbles while plastic case was in place. watching you 'poked me' to remove the case

The best tutorial on placing the tempered glass protector by far… Thank You

Thank You So Much For Talking During This. I Found So Many Videos Where They Wouldn't Talk Thru It & Explain Everything. Your Video Was Extremely Helpful & Now My Phone Is Protected (Hopefully LOL). Thanks Again 😊

Just want to thank you so much I have try this trick and it’s work so well

Awesome. Thank you!. Wonder how to protect the cam lenses

I just finished putting mine on. Great video! Thanks!

Tested, worked perfectly! Thank you!

Perfect! Hassle free & quick I can't believe it. I didn't even get one single air bubble or one speck of dust! I am totally amazed. Thought for sure it was going to be a nightmare and it wasn't! Thanks for the video!

Thank you. This was very satisfying to watch and the results were also.

Great now I know what the stickers are for. Thanks a lot

This is such a great tutorial. I got the Ailun brand screen protector, but the contents of the package (including the guide stickers) are pretty much identical (mine came with a camera lens protector, though, which I do like). The angle made it really easy to understand how it works since you can see the protector start to adhere if you leave it in place for a sec. I did have a couple of modifications that I think worked well for me. First, I put the phone on a slightly elevated surface (I used my 2-inch cutting board) to make it easier to fold the guide stickers around the edge without picking up the phone. Just ever so slightly let the edge you're putting the guide stickers on hang over the edge. It just gives you a little room to fold the stickers over without having to pick it up. Second, I carefully set the dusting sticker aside when I was finished with it, then used it as the third sticker in place of an extra guide sticker (the one in the middle you use to open it without touching the sticky side of the protector). I did that because mine came with two sets of protectors (one each of the screen protector and the lens protector) and just enough guide stickers to put both on if I needed to change it or use it on another phone.

Thank you - what a difference using guide stickers make.

Guide stickers really made this installation so easy,thanks.

You just simply well explained it. Thanks man🙏

Spot on, thanks so very much appreciated you made it easy simple, followed your instructions and it works !!!

1:18 am I the only one that saw that sarcastic little piece of dust fall onto the screen right after he got done using the dust sticker?😂

I applied one to my Android without all the stickers but I'll keep this in mind for the future. Thanks. 😊👍

Thank you! Ik worked like a dream

You should use the dust removal sticker immediately before placing the protector down. Also, you should not touch the circle part of the dust sticker, only the handle. Otherwise skin cells and oils from your finger contaminate the sticker. Otherwise great job.

Yes, if only the screen manufacturers had provided guidance like this, it would have been great! Thank you!

Perfect. Excellent, simple explanation.

Perfect fixing to guide. Good 👍

Video was very helpful. Thank you!

This is the best tutorial I have found on KZfaq. Thank you very much. Too bad I didn't find it sooner, because I've spoiled a Tempered Glass Screen Protector.

Thanks for sharing. Now, I have an idea. Thank you so much...

Extremely Helpful THANX

DUDE!! OMG !! Will definitely do this. Good thing my screen protector hasn’t arrived yet

Awesome video!! Didn’t know how to use the guide stickers

My has like I little bit just a little bit of hair inside the glass protector when I put it on soo I think the hair won’t make a scratch right ?

You're a life saver, I didn't know what all the stickers were for...

Proper explanation. Thanksssss. I am in my 60. This is the best tutorial.

Does a Nano Glass Flex Glass screen protector follow the same installation process as the Tempered Glass??

Also, what are the guide stickers for?

I don't like tempered glass I'm still old school and I prefer plastic film. The problem was dust and adjustment. Finally over almost 12 years of failure your video allow me to install the film with no bubbles and no dust. Thank you sir. Plus I really like the tech armor films, they have quality.

Thanks a lot Nice video❤

Thank you, a very good explanation - it worked :)

Great tutorial & worked like a. Charm

Now I know how to use the stickers. Thank you.

Thanks bro now I finally know what is the use of that stickers😀😊.

So I just want to know if I'm missing something. It doesn't look like the Dry Wipe was used at all. So am I correct that I Should Not use the Dry Wipe, and only use the Wet Wipe??

Thank you bro

I replaced the battery of my iPhone today. So I need the protector had to be put it again. I've been stressed out by problems with align on the corner or bubbling every time. However, after watching this video, I was able to attach the protector flawlessly. This is really a good example of how well humans can use tools.

Great tutorial! Thank you 😊

I used these same steps for my iPhone 12 thank you!!

Very nicely done thank you much.....!

Thanks! Good explanation and perfect line up with my phone. I was nervous to attempt this, but did it! No bubbles, dust or hair!!

So helpful. I learned a lot. Thank you.

Beautiful job. Great video! Will work for any phone. Not just iphone.

What can we use if we dont have the wipes for the screen protector

Thanks it helped me a lot

thankyou so much

thanks. great video!

Very useful, thank you!

Thank you :)

Thanks for this tip, it's very usefull!

The screen protector from Zagg comes with installation Tray , in the video I still can see the bubbles along the edges why ?

Top tip my friend thank you so much.

Thank you. I learned a lot.

will try again thanks to you. after three installations, still have one or two speck of dust under and I really don't know why. Came to the conclusion, I just can't do it correctly. Shaky hands or maybe my house is too dirty...Don't know. Am I the only one in that situation?

This video helps me alot

To the point Great Tutorial

Very nice work ,thanks too

Great video! I just installed mine today. Unfortunately I didn’t see this video in time before hand lol. At least I know how to use the guide stickers properly now for the future.

Very helpful....👍

Thanks for the guide! it was really helpfull! Hi from Mexico

Thank you so much omg I'm such a perfectionist when I need my glass screen protector done so I always do it by a professional but I just did it by myself and it came out perfect!

Thanks, very helpful🫶

Thanks from Spain

thanks it helped me a lot! :)

Is good way on softscreen. The tape on otherside. Just try not pull the taped ones as bubbles. The way it flows is brilliant. Using othervtype its more stress

Thanks!

I just slapped mine on and it came out perfect lmao. But I didn’t do a good job at removing the little specs of dust. So there’s like 4 tiny dust bubbles on my screen. Brb ima do it again

Very good video, wish I had of viewed this before I installed my protector

It goes over the camera?

So you’re telling me that all this time, i could’ve used guide stickers to put the screen protector on instead of taking it on and off to align it ? 🤦🏾‍♀️i feel so stupid now😂

Thank you very much for your cool guid, really I learned the right way.

this really works like tysm

Bravo! Thanks 👍🏼

useful information, Thank you....

Very well instruction

Thank you!!!!! 👍😊