This is a solution I did to fix my non power on issue after the cord was pulled from my all in one. I was able to solve this on my own hopefully it helps others.
Пікірлер: 129
@sandracordova17292 жыл бұрын
Thank you so much for this video. Had a repair guy come out. Couldn't fix it and said I needed a new system. Took me 20 minutes and it's on again.
@Ziyn1002 жыл бұрын
I'm so glad this video is still helping people. Happy you were able to get it up and running again!
@thedonreedshow3 ай бұрын
Dude you saved my butt you have no idea you're the only video on KZfaq
@Christina-ry4hc7 жыл бұрын
Thank you sir! this fixed my computer right away. Sent my computer back to hp because it wasn't turning on. They repaired it and sent it back. 91 days later ( day after the warranty expires) it happens again. Frustrated with the price they want to charge me to fix it I turned to your video. such a easy fix. Thank you soo much!!
@wandavankeuren4601 Жыл бұрын
OMG!!!! I cannot thank you enough for sharing this!!! I kept reading about it but no one showed me how to do it. You have been a lifesaver ❤️❤️❤️ thank you soooooooooo much!!!
@VintageMic4 жыл бұрын
I am able to refer to this video to recovery a “dead” 23-Q05HK but it was not successful when shorting pin 2 and 4 the first time. After trying the second time I touch the pin 2, 3 and 4 with a flat screwdriver and magic happened. Thanks for sharing this video which make my trial much easier!
@Ziyn1002 жыл бұрын
So after reviewing many comments here a lot of people are saying the cmos battery replacement did the trick just fine. If your having this issue with yours, I recommend doing that first before shorting anything. In my case there was nothing wrong with my cmos battery and I still have the same one in it to this day. The machine is still running just fine and hasn't had this issue again since.
@jeremygrimes44677 жыл бұрын
Thank you so much for this fix. I think this is the first time I have left a comment on a video but I just had to say thank you for uploading this. I got my wife's computer working again while she was sleeping in and she hopefully will be none the wiser. I really hope that the problem does not come back but at least its an easy fix as far as computers go.
@davidj.534 Жыл бұрын
You proved that my adapter was the issue. Thank you! After plugging in my keyboard I got a new error about the adapter. It was hard to identify and make sure that this was it before getting a new one. Props to you!
@davidmbugua47657 жыл бұрын
Excellent video. Worked first time with no issues. Thanks for the excellent tube on this problem. 👍👍
@chrisnavarro51227 жыл бұрын
Just to add, i have also the same PC however the problem was on the battery, seems we have a not so clean powerlines so it damage the battery.... Problem solve!!
@TDKexpress3 ай бұрын
Thank you for the video. I will be attempting this tonight. Hopefully it's just the power button.
@waskilywabbit4 жыл бұрын
lol, I did this before the video and was curious if someone else did it, works great!
@robbilson15064 жыл бұрын
Man, you are genius. Many thanks for uploading this video and good luck to everyone
@elihuerta9317 Жыл бұрын
This video helped me fix the hp for a friend who was gonna trash the computer. Thank you for the vid
@akiraxtreme3 жыл бұрын
Just ran into this same problem on a HP Pavillion 21 AIO and just changing the CMOS battery fixed the problem.
@kelleytech2 жыл бұрын
Thank you for this video, I don't have the same model as you but this video gave me the idea to short out the power leads on the motherboard. Thanks to your video my HP pavilion 21 all in one came back to life.
@Ziyn1002 жыл бұрын
So happy to have given you the idea to get your machine back up and running. I still have this machine and have yet to have the same issue repeat itself. Just happy this video is still providing help being as old as it is.
@senswiwuu2 жыл бұрын
Not sure if anyone will see this but I am having the same problem with my asus all in one and I'm wondering if anyone else has heard of it happening with one of those? I'm not able to take it apart just yet (health problems) but am trying the unplugged approach in the mean time until I can get at it. But hopefully won't have to. Any direction is welcomed, thanks for putting the only video I could find on this!
@connectriz2 жыл бұрын
Simply brilliant. Worked well for me straight away. Thanks a ton. Adding a clarity, use same wire (suggested usb cable) color for both side
@thesimmerfangirl95935 жыл бұрын
This saved my computer. Thank you so much!
@OneLoveDesign5 ай бұрын
Thank you very much for this video! Much appreciated 💪🇺🇸💪
@SvnnyMoney7 жыл бұрын
nice video, but would be better if you add the specifications of your machine... Because your HP Pavilion AIO doesn't look like mine, I'mm assuming yours is older.
@knowledgeborn27973 жыл бұрын
Thank you so much for this informative video. You saved me time and money!!
@williamanderson2567 жыл бұрын
Ziyn 100 I need to know how to get the power switch LED light to come on when power cord is attached! Your video solution only works when my HP Pavilion 23 all-in-one is plugged in and the power switch LED light is on! Please help!
@michaelmuyangana67482 жыл бұрын
Man you are a star - this method works, I tried it. Another method that I discovered works is simply to disconnect the computer from the power source and leave it off for 8 - 12 hours. Connect the power supply and it press the power switch on. Mine has gotten to work after that
@labro89645 жыл бұрын
My friend you are the best, your solution worked like a charm, thank you
@thomasalexandersr82225 жыл бұрын
Worked for me first time, great help!
@myfight227 жыл бұрын
Worked for me. Took a couple of tries, but the switch eventually worked! Thx
@stevesibaja31234 жыл бұрын
HP ALL In One Desktops are the most delicate PC's The White Light is on but it won't power on
@kojimkj4 жыл бұрын
I have the same issue, did you find a way to fix it?
@stevesibaja31234 жыл бұрын
Not yet but I still need to open it
@justsarry72343 жыл бұрын
Did you do it?
@liastar24833 жыл бұрын
@@kojimkj did you fix it?? Please help
@Hollow33N2 жыл бұрын
Fr I probably won’t be buying another
@brianalvarez6377 Жыл бұрын
FYI, same thing happened to mine, all you had to do is remove the CMOS battery from the motherboard and put it back in. Using an arc to short/jump the pc is harmful to the components. The CMOS would have reset all the components internals and would start right back up. I just stumbled across this video and thought id share the right way to solve this issue.
@Ziyn12 Жыл бұрын
Thanks for the tip, I did remove it, and unfortunately, it didn't do anything to help the issue for me. I mentioned in the video that I would recommend a pc repair specialist prior to attempting such a thing on your own. I didn't have the money at the time and knew a few things about pcs back then. I also mentioned in on of my comments, that it could damage the pc and that you should attempt it only if it was your last ditch effort. 😉 Also the jump I provided was simply bypassing the power switch so there wasn't any real harm threatening the computer so long as nothing else was grounded in the process. BUT FOR THOSE STILL READING AND TRYING THE FIX ... By all means plz try the cmos first.
@SoundToxin9 ай бұрын
Shorting the pins on the ribbon cable to power it on is exactly what pressing the button is already doing, there's no reason it would be worse for it. The only reason the result is different is probably to do with dirt or a loose connection stopping the normal button function from working.
@LongscopeTV7 жыл бұрын
It works, unfortunately once the machine shuts off (power outtage or update or whatnot), I have to re-short the switch to get it to turn back on. So I ran two wires from pin 2 & 4 on that ribbon-cable, and touch them together whenever I need to turn it on. meh. but at least it's not a paper-weight anymore. thanks.
@SoundToxin9 ай бұрын
I would try cleaning the end of the ribbon and the slot with isopropyl alcohol and then blowing them dry with compressed air.
@lopiklop Жыл бұрын
That's essentially what the switch does. It makes contact with the wires during depression of the mechanical button. Who knows maybe there's a piece of dust covering it
@jqstick007 жыл бұрын
thank you sir. - i was wondering how to short out the switch - bought a new one from ebay but no good. bought new ribbons from ebay - no good. will try this out
@issackdarur24847 жыл бұрын
jqstick00 did it work?
@jqstick007 жыл бұрын
yes it worked however i had to short it from the ribbon that is on the edge of the motherboard that goes to the power switch. just touch it with a flat head and it powered on. i was excited that it fired up
@Icebear-fy8vg7 жыл бұрын
I'm scared to do it actually.
@greenavocadeos7363 жыл бұрын
Me too
@kylerunyeard44795 жыл бұрын
Hope someone see this, having a similar issue. My motherboard has no light on even with the power supply fitted. tried almost everything already. any ideas?
@usnva56385 жыл бұрын
It looks like the connectors to the thermalthrockle and dipolar gates were inverted during manufacturing of your PC. That was my issue and it was a quick fix.
@jbabu2896 жыл бұрын
my hp 23-q141in all one pc, i am get 3 long beeps & 4 short beeps repeat five times. also blink power light after that pc will start. pls guide me
@arminposting3 жыл бұрын
Same
@Umnbo4 жыл бұрын
Thank you very much... it worked -- just follow instructions very closely .... (: thanks for the help
@mike_vahemoubayed80996 жыл бұрын
When i press the switch on mine the led just turns on and off quickly
@henilsoni55684 жыл бұрын
Do you solved it?
@henilsoni55684 жыл бұрын
@Mr Greedy bro what you did next?
@henilsoni55684 жыл бұрын
If anyone solved this problem pleasee help me !!
@henilsoni55684 жыл бұрын
@Mr Greedy if you found then please remind me 🙏
@mike_vahemoubayed80994 жыл бұрын
Hello everyone I fixed it by unplugging the power supply for 48 hours it works fine now!
@jerichowall81852 жыл бұрын
Have one of these AIO 23-Q112 that was shipped with a corrupt BIOS that would often not turn on. Not the BIOS battery as the onboard clock and settings don't get wiped when unplugged.... . Tried to update the BIOS using SP97015 and it said the BIOS was wrong.....Now all I get is the front LED flashing 7 times.
@neverdifferent3615 жыл бұрын
The thumbnail looks like skyscrapers out of a window
@jonellemorgan5156 жыл бұрын
So far so good!
@AS-by7js2 жыл бұрын
Only the 3.+4. Pin works if i connect them. But that shuts the Power-LED off, and the PC still won’t boot up. If i try the 2.+4. Pin nothing happens. I already changed the CMOS-Battery. Need help please.
@hiteshk2 жыл бұрын
The white clip came off and I can't put it back on, using the wire route seems to work but now what's the a good permanent solution?
@theimpaler23172 жыл бұрын
Mine the light by the power port won’t even come on, does that mean there is a different problem? Help! Thanks!
@stevenhatch31207 жыл бұрын
Had the same thing happen to me. Replaced the cmos and it booted perfectly.
@issackdarur24847 жыл бұрын
Steven Hatch cmos?
@sweetbrownsuga5046 жыл бұрын
Steven Hatch What is the cmos??
@mayasdaddy16 жыл бұрын
CMOS is basically the software that the computer runs when it boots, prior to the computer invoking the OS (Windows?). The CMOS starts Windows and tells it what device to boot from, normally the hard drive.
@racker51085 жыл бұрын
For anyone who comes across this, OP was referring to the CMOS battery. Looks like a watch battery on the motherboard.
@911Gadgets-kd1kj4 ай бұрын
can you re upload the video turns with green lines now which is weird
@robcastaneda15 жыл бұрын
I just replaced the bios battery and it started again
@hiteshk2 жыл бұрын
What's a permanent solution because it only seems to work with the wire touching but I don't think that is a viable ongoing option.
@SuperNurbolat5 жыл бұрын
Thank you very much indeed!
@lecorpleco85116 жыл бұрын
Really good. Excellent
@funny.onix_ar4 жыл бұрын
Hey guys i just powered on my pavilion 20 and the led on the power button went from white to orange then i pressed the button and it was not responding so i took of the ac adapter then put it back on and the power light for the ac adapter turned on and i pressed the power button and the led won't turn on can someone help me??
@bigjoeduncan19456 жыл бұрын
My HP envy 23 all in one is doing this. Back light on, no power button function. My year doesnt have a ribbon. It has 4 wires to the switch. Red, black, geen, and white. Anyone know the 2 colors to bridge?
@mv47046 жыл бұрын
BIG Joe Duncan bridge blue and red
@robcantrell2684 жыл бұрын
Thank you!
@mytexasdays15265 ай бұрын
Mine has been stuck in a automatic repair loop. Anyone have a solution? I've been through the processes of typing in commands and it hasn't solved the.
@danthony57916 жыл бұрын
I have a hp 20 and I get a keyboard error on the boot up. Know how to fix it? I think there is something up with my usb ports
@911proservices6 жыл бұрын
Good morning. Thanks for this video. Great. Did you have any clue where can I mess when i don't get any video signal. I can't see any signa on the video HD and power goes on, But I don't know where start the diagnosis. Thanks.
@spankybat6 жыл бұрын
This just happened to me, but I don't know anything about any of this blue wire, snap open pins, opening pc, connection light stuff. I'm pretty much done for. This thing was expensive, and I'm guessing repairs are just as bullcrap and pricy. All over my stupid choice to unplug and replug the computer to fix a frozen game.
@yusufiskandar26286 жыл бұрын
awesome, would you mind step by step picts?? Thank U
@mikestew76837 жыл бұрын
I see one person on here said that they have to do this every time there is a power outage. is that true for everyone that has tried this fix? Thanks.
@sanjoe12463 жыл бұрын
is this the hp pavilion 20 all in one computer I have the same problem
@georgenconor2 жыл бұрын
I dont even get a led light when plugging the power , what could this be
@leseditwala814 Жыл бұрын
Hy guy please 🙏 help I used a wrong adapter on my hp 2021 all in one pc and now it doesn't want to turn on
@rowenalalangan54184 жыл бұрын
But the power button of ours lights on but the computer isnt on its like its turned off
@kennethpappas5 жыл бұрын
how do you short switch?
@sossoya866 жыл бұрын
i did everything u done and turns out i just need to replace my CMOS battery. 😂
@williamss88355 жыл бұрын
Didn't work. Machine made a pitter patter noise but no light
@busoptr3 жыл бұрын
Cant you just change the switch on that ribbon cable?
@azztr16977 жыл бұрын
How do I take it apart
@salperez37984 жыл бұрын
I got a hp 20 I had it on one day and the screen went black....when I connected it back my keyboard and mouse don't turn on but the light on the power button does
@aaronturner46124 жыл бұрын
Did you ever find a fix to this? I’m having the same problem.
@dannywills93393 жыл бұрын
Great
@haidaramoussa32888 ай бұрын
Salut moi je n'arrive pas à résoudre le mien
@BigBoss-vd8jl5 жыл бұрын
I dont know shit about hardware and stuff but my power light is blinking really fast continuously but my computer still wont turn on. Help?
@kennethpappas5 жыл бұрын
hey buddy, i get a light on in the back where i plug in power but when i press the switch, the front light does not come on and i dont get a screen. what would you propose? i have a ribbon cable to the switch with about 8 leads. thank you.
@xlordzee5 жыл бұрын
did you managed to work it out?
@kennethpappas5 жыл бұрын
@@xlordzee replaced board
@Nezello2 жыл бұрын
Or you could remove SHORT and replace back the CMOS battery...
@nicholasaggrey53573 жыл бұрын
MY HP 23 ALL IN ONE ,IF U PUT CHARGER POWER COMES AND SHUT DOWN
@spmajeski4 жыл бұрын
Does anybody have a procedure for same exact problem, but as my HP 23 must be different model cuz power switch wire to main board is not that of the 4 wire configuration as shown but that of a 6 switch connection and dont wanna fuck it up by just guessing.....ANY HELP WOULD BE GREATLY APPRECIATED
@spmajeski4 жыл бұрын
Hp-23-p027c
@jackburton95077 жыл бұрын
does nothing for me but turn the power switch led on
@gabrielagaytan917 жыл бұрын
Jack Burton mines doing the same thing. Were you able to fix the issue?
@jackburton95077 жыл бұрын
no, it wasn't mine so I tried everything I knew with no results ,I now use the screen with e-bay bought driverboard and my raspberry Pi
@msawyer1127 жыл бұрын
Did anyone solve this? My power switch light turns on but no computer startup
@gemanyanezaraujo19626 жыл бұрын
My computer turned on but screen didn't. Before the hard drive starts functioning the computer turns off and the power switch lights turns on and off. I found one cable in the upper left of the motherboard disconnected. I fixed it by connecting it.
@infinity37336 жыл бұрын
I have a Envy 20 so i dont have that....
@kouchsengngy7 жыл бұрын
Second pin and forth pin from the left!!!!!!!!!!!!
@robertolitninja57237 жыл бұрын
same for me
@xtaboy26194 жыл бұрын
God fukin bless u
@paulahaire17376 жыл бұрын
Where is the power supply unit
@mayasdaddy16 жыл бұрын
The "power supply" is the cable and box that plug into the back of the computer.
@busoptr3 жыл бұрын
Its external.
@blakespower3 жыл бұрын
these all in one pc stink, I wish there was a way to use the monitor on a dead PC that I can't fix
@escrotopurulento6666 ай бұрын
amigo, un favor grande, me podrias regalar una foto con buen aumento sobre el area del jack del adaptador de voltaje de entrada, es q mi pc tuvo un corto y se me quemaron uns componentes justo debajo del jack, mi pc enciende el piloto de conexion de adaptador pero emite unos pitidos, quiero reemplazar estos componentes pero tengo ese pedazo de pista arruinada.... me podrias coolaborar con una foto de esa parte de la board: jack de voltaje de entrada