HP Pavilion g7 - Disassembly and cleaning
Рет қаралды 53,076
7 жыл бұрынIn this introductory video, we will show how to disassemble laptop HP Pavilion g7.
Our team will show all necessary steps of disassembling, however don't hesitate to ask us if you have some questions.
Be careful this may damage your laptop or other equipment! We are not responsible for any damage to your device!
If you finding our video helpful to you, please don't forget to give us a Thumbs Up!
@irealtytv9780 6 жыл бұрын
good video almost exactly like the model I have, worked great as i had to replace the fan thanks 👍
@nintendofanatic2837 2 жыл бұрын
Best laptop to warm up with (for real, i have the same laptop from 2012, it gets warm quick)
@jozobozo9150 Жыл бұрын
Loud as jet plane 😆
@loripelar8221 7 жыл бұрын
Or is that a heat reducing material you are using? Not sure. Didn't think any adhesive would go back onto the laptop but this is first time I'm doing this. Video is nice and really helped me take the laptop apart as the fan component needs replacing.
@BrienHolcombe 3 жыл бұрын
Very helpful video, thanks so much!!!
@magmasunburst9331 5 жыл бұрын
Is there an easy way to take the CMOS/BIOS battery out? I saw one HP where it was just a matter of removing a backplate and it was exposed.
@wadwad1222 Жыл бұрын
Good video but mine is a different pavilion which doesn't have screws in the pipes. Im still finding ways to remove the fan in the board. I think it has a glue or something because I don't see any screws in it.
@soiaryt9021 5 жыл бұрын
Please help did this motherboard will run on hp pavilion g6 thx
@jmaschle 4 жыл бұрын
Thanks for the video. Is it just me, or does it seem like the left hinge is really bad design? The mounting surface area is not large enough (its about half the size of the right hinge) to handle the spring load of the hinge causing the nut and housing to just rip out. I tried WD40 to loosen up the hinge to no avail...
@charlbrassell2001 4 жыл бұрын
Yep
@brightonchou1393 4 жыл бұрын
i just want to clean the fan. do i need to do all those unscrewing things?
@NotebookCenterTV 4 жыл бұрын
It seems like yes, until you get access to the fan. However, usually, it requires the change of paste as well.
@paulsantangelo3813 7 ай бұрын
When taking the unit apart, i found these shims throughout the unit. I think this was why the unit died. Does anyone know what they were used for?
@djsi38t 5 жыл бұрын
Thermal paste is to fill any void between the two surfaces.if both surfaces are flat then think about how thin of a layer of paste is actually needed.the amount applied here is to much.two dots the size of a BB on each die would have been plenty.
@kgglucas2549 3 жыл бұрын
I think something ncame out and it keeps making a lawn mower noise.?
@Ink_25 7 жыл бұрын
I'm sorry, but my Pavilion g7 looks different on that side. It has much more screws. Does it differ in the g7 series? Also, the screws holding back that plate you removed don't work for me, I can turn them infinitely, but it seems like they're stuck and won't come out. Anybody having an idea of what went wrong?
@NotebookCenterTV 7 жыл бұрын
There are different series of Pavilion g7.
@DacDaMan710 5 жыл бұрын
If this laptop breaks can I put the hard drive in another just like it?
@NotebookCenterTV 4 жыл бұрын
Sure, you can do it
@elmatatan3381 5 жыл бұрын
What did you use in rag to clean the old thermal seal off?
@djinn.n 5 жыл бұрын
El matatan likely some kind of cleaning alcohol
@BrienHolcombe 3 жыл бұрын
@@djinn.n there is no thermal seal with paste. It is more like a piece of velcro, the rigid part, and the cpu rests on that.
@octavianadam6214 6 жыл бұрын
No changes after cleaning CPU temp is 98 celsius. Any advice?
@crm4F240 6 жыл бұрын
Try coretemp, speccy indicates 88 C and coretemp 61. Anyway, after replacing the original yet only partially applied cooling agent by a new, the processor fully covered layer of Master Gell Maker (Cooler Master manuf.), the very often appearing vacuum cleaner noise of the fan is history.
@Roky1611 6 жыл бұрын
ist ja gut und scheun was der da macht aber wen der nuer die külpaste weglen tut und den den lüfter nicht richtig mit sauber macht bringt neue külpaste garnichs weil wen die lüfungs schlitze fertregt sind bringt das garnichs.hab ich auch mal fergeßen wer beina schifgegengen weil die warme luft nicht entweichen konnte ist der cpu auf 95grad gestigen
@EJudeGarcia 4 жыл бұрын
Can i replace the cpu into an i7? Or just amd only?
@EJudeGarcia 4 жыл бұрын
@@Mightic sorry but mine can be replace. Not all laptops are all soldered
@lesagephilippe4854 4 жыл бұрын
Dommage de ne pas être allé jusqu'au bout : le démontage du ventilateur puis nettoyage des pales et surtout du radiateur est juste impératif à faire.
@jovic_denis 6 жыл бұрын
Is the CPU removeable?
@NotebookCenterTV 6 жыл бұрын
Yes it is
@loripelar8221 7 жыл бұрын
What adhesive do you use for the fan?
@NotebookCenterTV 6 жыл бұрын
It is thermal paste.
@jackkraken3888 2 жыл бұрын
It's not an adhesive it's called thermal paste, its supposed to help transfer the heat from chip to the cooling system. It must be applied properly and if not done correctly will caused the CPU and/or the graphics card chip to overheat and caused thermal throttling which will slow down your pc to prevent damage to the CPU/graphics chips.
@jasonnoles1878 2 жыл бұрын
Add for youtoub
fix.your.stuff.manual
Рет қаралды 4,7 М.