Rebuilding the hpi baja 5b differential. Music - All my shiffling - KZfaq audio library.
Пікірлер: 31
@noname-ge3tz6 жыл бұрын
nice work very slick
@RakishRc6 жыл бұрын
Thank you!
@patricksin22632 жыл бұрын
Very good mechanic
@RakishRc2 жыл бұрын
Lol thanks 👍
@CHUFFER2516 жыл бұрын
Spot on that video thanks
@RakishRc6 жыл бұрын
CHUFFER251 thanks!
@jupitermxpertamax67455 жыл бұрын
good job...i like it
@RakishRc5 жыл бұрын
Thanks!!
@kellyboyfrancisco59014 жыл бұрын
Very helpful vid..
@RakishRc4 жыл бұрын
Thanks!
@SmilingCurling-im4rt8 ай бұрын
Heelllp!!!!??? A new diff and rebuilt old diff operate exactly as yours done on completion... Once installed however they won't turn opposite unless I hold the bell or hold the brake pad closed little... Doing my head in 😅
@SmilingCurling-im4rt8 ай бұрын
About as smooth as they should be too so I'm at a loss? My clutch isn't stuck on or anything as far as I can tell
@fariacarlton6 жыл бұрын
Awesome video. Thank you so much. Could you by any chance do a complete tear down and re install of the HPI Baja. If not, at least the engine on and off the chassis part please? Thank you 🙏
@RakishRc6 жыл бұрын
Thank you very much! I wouldn't mind doing that but if you want to remove the engine and also rebuild the entire car I'd suggest going through some of team fast eddy Baja build videos. They should help you in my opinion. :)
@fariacarlton6 жыл бұрын
Thank you!
@peterbennpan7288 Жыл бұрын
I rebuild my baja diff and had it out over the summer months then stored it away for the winter and now I have diff oil leaking out. It all gathered underneath. What do you think u did wrong?
@tkrlex34625 жыл бұрын
Hi can you tell me what the red fluid is your using on the screws and where you pushed the outer bearings on to. I'm new to the hobby and just got my first 1\5. Thanks
@RakishRc5 жыл бұрын
Hi, the red fluid is called red loctite or red thread lock as well. It's used to maintain strong bond between surface where applied.
@onemansvideos21345 жыл бұрын
This is crazy.... Friend asked if I can replace his dif cup on his Baja this is the closest video I could find on a Baja dif video idk what I'm goin to tell him
@RakishRc5 жыл бұрын
Good to know this helped you!
@pierpa_76pierpaolo6 жыл бұрын
But how do you remove the pin (there is no space but a way there is at the moment the ignore) of the differential in order to extract and replace the bearing? Thanks so much.
@pierpa_76pierpaolo6 жыл бұрын
Resolved!! The inspection screw ............ Damn!!!
@TMRu223115 жыл бұрын
What do you do if the diff pin is stuck? Removed bolt and gear but that pin will still not slide out.
@raulfernandez91115 жыл бұрын
Those two left over brown o-rings.. What are they for?
@RakishRc5 жыл бұрын
The ones at 1:30? Those are metal thick washers.. Replaced by their exact size ball bearings for better performance.
@raulfernandez91115 жыл бұрын
@@RakishRc The ones at 6:50.
@RakishRc5 жыл бұрын
@@raulfernandez9111 ya those are the metal washers mentioned at 1:30..
@buzzbazringo99244 жыл бұрын
Hi can i use 30,000wt oil in the diff for a baja?
@RakishRc4 жыл бұрын
It's not manual recommended..30,000 wt will stress your transmission and increase engine temperature
@buzzbazringo99244 жыл бұрын
Rakish Rc what about 10,000wt
@barrygauci993310 ай бұрын
Well crap lol ... wish I'd done this before I rebuilt mine😅