HPi EXHAUST INSTALL On LOWRIDER ST- HPI X RSD Cam Cover

Рет қаралды 21,464

Күн бұрын

Installing ‪@HorsepowerIncPA‬ performance exhaust on my ‪@harleydavidson‬ Lowirder ST.
Removing stock cam cover and installing ‪@RolandSandsDesign‬ Sector collection cam cover. This was the last piece installed on the full sector collection. The install is much easier with 2 people. Hope you guys enjoy.
#2023 #harleydavidson #lowriderst #2022 #harley #lowrider #motorcycle #custom #hpi #hpiracing #sector #cam #camcover #wrenching

Пікірлер: 71

@danielbuchanan5327 3 ай бұрын

That RSD cover goes great with the pipes. Clean bike!

@jjs8046 Жыл бұрын

Cam cover looks totally out of the place. Exhaust...😍😍😍

@harleydave2316 Жыл бұрын

Very nice! Just wait until you cam it. She'll sound even better!! 😊

@locoocho2415 7 ай бұрын

Nice install. Great explanation 👍

@1Thirty1 10 ай бұрын

That pipe is sick‼

@johndough5346 Жыл бұрын

I put an HPI on my lowrider ST also and tuning it is one of the most important things that has to be done. ASAP. If you care about that motor anyways.it’s not just sounds. Plus you can always flash the original map back to the bike.

@coreyboren3476 5 ай бұрын

Such a beautiful exhaust

@sharkdog111 4 ай бұрын

Sounds great, and looks amazing.

@Papo.7601 Жыл бұрын

Looks and sounds great 👍 good luck with it my friend

@theneverman 10 ай бұрын

Thing of beauty.

@dgross2009 Жыл бұрын

Had dealer install Bassani Road Rage 3 on my LrS. Lot less than the HPI ($900) and available immediately. Stainless steel pipes get mixed reviews for sure. I love them especially on this bike with the bronze wheels. Cost $1000 more at the dealer for the tuner and auto tuner which was needed to retain my warranty. Those HPI's look like they would get really hot. The RR3 have some protection and I still managed to burn my leg.

@HardTail-LA Жыл бұрын

Hey Don !! Congrats on the exhaust. Bassani rr3 are great. I appreciate the compliment , I really like the look of the hpi as well. Surprisingly they don’t get really hot to the point where it burns my leg. I think it’s because I have forward controls and my legs and feet are not right next to the pipe.

@alfonsothegreat4481 Жыл бұрын

The muffler clamp looks loose

@HardTail-LA Жыл бұрын

Appreciate the heads up brotha. Yeah one of the pieces didn't seed in, I noticed it after I finished recording. I've adjusted it and it's perfect now. The thumbnail photo is with it properly clamped on.

@kellybgliding Жыл бұрын

Man you bike looks good and sounds good and loving the exhaust. I’m subscribed

@HardTail-LA Жыл бұрын

Thank you Kelly ! Appreciate you supporting the channel.

@kellybgliding Жыл бұрын

@@HardTail-LA no problem

@augustinasvilkas Жыл бұрын

Looks like that band clamp on the collector is loose brother.

@HardTail-LA Жыл бұрын

Appreciate the heads up brotha. Yeah one of the pieces didn’t seed in, I noticed it after I finished recording. I’ve adjusted it and it’s perfect now. The thumbnail photo is with it properly clamped on.

@augustinasvilkas Жыл бұрын

@@HardTail-LA Good stuff, looks nice and sounds good brother. I got an SPC cutback 2 in 1 on my ST and I love it. Stainless exhausts look so good on these bikes.

@HardTail-LA Жыл бұрын

The spc is a badass pipe, I love the way it looks. How long did you have to wait for it ?

@augustinasvilkas Жыл бұрын

@@HardTail-LA I think it was about 3/4 weeks delivered

@Rollanotheronemyfriend Жыл бұрын

Sounds and looks good. Pull the plugs after 500 miles or so, see if it's lean.

@user-qc9kz9pt4e Жыл бұрын

nice video

@michaelthompson7001 Жыл бұрын

that is a sweet pipe man!!

@HardTail-LA Жыл бұрын

Thank you Michael !

@Dr3mos Жыл бұрын

Looks good!

@phatsanauxsonwut825 5 ай бұрын

💚

@orli2940 Жыл бұрын

Nice install video, great looking & sound pipe…. Enjoy & ride safe

@HardTail-LA Жыл бұрын

Thank you so much Orli! You as well.

@MilesOn2 Жыл бұрын

Sickk

@michaelmitchell5909 Жыл бұрын

Looks amazing. U need a cam dude...star 3030 to be exact!

@HardTail-LA Жыл бұрын

Wutup Michael ! Yeah it’s between that and ss475. The star sounds great , but love the way 475 sounds. Which you like more ?

@michaelmitchell5909 Жыл бұрын

@HardTail It was sns 475 until I heard sandy from Holy shifts low rider st in gunship grey get the 3030 woth a sawiki pipe, similar to the hpi pipe, and it sounds pretty damn amazing. So the 3030 has a 485 lift, the sns obviously a 474 lift...the max you can go is a 50p lift on the m8 117 before needing springs. Do what you like man, but don't use sns lifters cause they fail.

@HardTail-LA Жыл бұрын

There both similar in hp and torque numbers to

@sLowRider114. Жыл бұрын

I have a 475s&s and i love it full cam chess kit cant go wrong star is cool too

@grimeyhonkyracing3938 Жыл бұрын

@@michaelmitchell5909 what lifters do you run

@michaelthompson7001 Жыл бұрын

I'm running the Star Racing 30 / 30, you should look at it, also the Woods WM8-22XE as well

@HardTail-LA Жыл бұрын

How long have you had it ? Any issues or has it been running smooth ?

@michaelthompson7001 Жыл бұрын

@@HardTail-LA I had it installed when I did my 1000 mile service, runs great, a lot of low end torque with a very early close at 25 degrees, great throtle response, another guy on KZfaq, Holy Shift just had it installed on his bike and the guy at his shop talked about the difference between the 475 and the 30 / 30, you may want to check out that video, has a great "lope" as well, George Bryce of Star Racing knows his stuff, ride safe, love the pipe!!

@michaelthompson7001 Жыл бұрын

@@HardTail-LA a couple of other things I did was an S+S oil pump, cam plate, lifters and an aluminum 55mm manifold intake, gotta get rid of the plastic one, as you may already know, the M8 motors produce a lot of pressure in the crankcase, so, I installed the Trask Checkm8 top cover, you have to relieve that pressure, you can use your stock valve springs with the 475 or the 30 / 30

@shawnbickler3574 Жыл бұрын

Just wait until you cam it……fire

@civic2323 Жыл бұрын

Hope your using a tuner and if so which one? And is the caliper supposed to be that loose?? Looks good.

@HardTail-LA Жыл бұрын

Dynojet power vision

@johncampos5716 7 ай бұрын

looking excellent. Is there a cam in there

@tau4942 Жыл бұрын

sounds great! Did you have to tune it after the install?

@HardTail-LA Жыл бұрын

Hey Tau! No I didn’t, once I put new air intake I will for sure

@danphan434 Жыл бұрын

@@HardTail-LAso tuning required for new exhaust? But it wouldnt sound like it suppose to?

@HardTail-LA Жыл бұрын

@@danphan434 the Lowrider st is already tuned from the harley factory. It says it on Harley website. So no you don’t need tuner if putting on new exhaust.(my opinion)

@HardTail-LA Жыл бұрын

@@danphan434 I didn’t tune mine when I put this exhaust on.

@danphan434 Жыл бұрын

@@HardTail-LAit was factory tuned to the factory exhaust though. I think if you could get it tuned it probably sound more bad ass

@martinbarrett5239 7 ай бұрын

Great vid, can you tell me which forward controls you’re using?

@HardTail-LA 7 ай бұрын

Harley brand

@kittiekthanapakdee3080 Жыл бұрын

How about bracket saddle bag support kit

@bmahoney98 Жыл бұрын

That clamp doesn’t look right.. am I missing something? Shouldn’t it be tightened all the way around

@HardTail-LA Жыл бұрын

Hey Benjamin , yeah it was loose . After I filmed I tightened it all the way. The thumbnail pic is with it fully tightened. Thanks for looking out.

@bmahoney98 Жыл бұрын

🤘🏼

@jasonkimble8926 Жыл бұрын

You decided on a cam?

@HardTail-LA Жыл бұрын

Yeah I think I’m going with ss475

@christopherj9494 Жыл бұрын

@@HardTail-LA STAR 30/30 THANK ME LATER

@racex3721 Жыл бұрын

No riding videos?

@HardTail-LA Жыл бұрын

What’s up brotha. To hear the exhaust or in general ?

@racex3721 Жыл бұрын

@@HardTail-LA Both actually you have a unique build on this bike and don't really hear a lot of bikes with the HPI exhaust.

@HardTail-LA Жыл бұрын

@@racex3721 Appreciate the kind words and the suggestions. I think out of my 30 videos only 4 have riding in it. I definitely need to do more riding videos ! The hpi exhaust sound is a video I’m actually going to do real soon. I appreciate you supporting the channel as well. I’m currently trying to figure out if I should do KZfaq full time, so all the support and feedback helps.

@racex3721 Жыл бұрын

@@HardTail-LA no problem look forward to it. New sub.