Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@tomellis7949 23 сағат бұрын
Did the same thing on my chrome heat shields with a micro fiber cloth. I tried plastic razor blades, didn’t work. Then I used a utility knife blade, took the melted plastic right. Didn’t see any scratches until I got it out in natural light. One good thing, you could only see the scratch lines at certain angles. Note to self, if bike is hot, don’t get anything plastic, including micro fiber near it.
@HardTail-LA 9 минут бұрын
@@tomellis7949 the scratches were a little visible on mine to but once it got heat cycled it didn’t show any more.
@R4TTLESN4KE 3 күн бұрын
Let’s get a bike update!
@Ahhson 8 күн бұрын
Needs side covers. That’s the best carbon piece on my opinion!
@user-hj4vs7to1q 12 күн бұрын
Look NICE I WENT WITH A SET OF FLO LEVERS. NO PROBLEMS WORK GREAT
@illduitmyself 25 күн бұрын
The reach behind bolts i nvr put bak in.
@user-pz9bz3zv6d Ай бұрын
Hi, I enjoyed your video and really like your tyre repair kit (that stores in its own handle)but can't find it on Amazon, can you share the name or link please as it is much better than the one I have. Thank
@HardTail-LA Ай бұрын
@@user-pz9bz3zv6d thank you so much! Type this into Amazon search bar : FRi concepts airplugger
@jjpro20021 Ай бұрын
Did you keep the left shift arm from the stock forward control kit, and just swap out the right brake arm only? Also online the brake arm doesn’t come with the brake pad thing like you have the spiked one here.. where do I get that?
@HardTail-LA Ай бұрын
@@jjpro20021 swapped out both . The right side is from cross thread cycles . I think there’s a link in the description
@unintentomas Ай бұрын
Hi there! Any problem with control cruise after installing the levers? Thank you!
@HardTail-LA Ай бұрын
@@unintentomas what’s up Tomas ! No problems at all . Why are you having issues ?
@unintentomas Ай бұрын
@@HardTail-LA Not me. I saw a comment somewhere about having issues with cruise control after changing the levers
@321letsjam6 Ай бұрын
Let’s go!!!
@danbarrette9888 2 ай бұрын
A good adjustable wrench. Battery jump pack.
@xkraztv 2 ай бұрын
you should list the parts you use in your description. looks awesome so far
@adammorgan7874 3 ай бұрын
It looks good. What risers are those?
@HardTail-LA 3 ай бұрын
Thanks bud. Roland sands sector collection . I got a full video of it in my profile
@adammorgan7874 3 ай бұрын
@@HardTail-LA Right on I’ll check it out.
@johnnybotello4304 3 ай бұрын
Where you at man,,,, any update on your bike?
@HardTail-LA 3 ай бұрын
Sup brotha , how you been! Yeah did a few things. Just figuring out if I should do this KZfaq thing
@johnnybotello4304 3 ай бұрын
@@HardTail-LA yea I get you,,, well just wondering if you’re ok man haven’t seen you post insta either. We’ll be safe just keeping in touch…
@HardTail-LA 3 ай бұрын
@@johnnybotello4304 thanks brotha
@danielbuchanan5327 3 ай бұрын
That RSD cover goes great with the pipes. Clean bike!
@dt8587 3 ай бұрын
The light is tilted up
@loydhelmick9682 3 ай бұрын
That’s some sexy shit!
@OnyxCVO 4 ай бұрын
I am getting my carbon fiber outer fairing for my 2022 RG from Rick this weekend. Can’t wait. Looking forward to it. 🎉🎉🎉🎉🎉
@HardTail-LA 4 ай бұрын
Congrats !
@morgando2 4 ай бұрын
Air pump too big, separate bag
@Jay_Tovennn 4 ай бұрын
Did it just get like that over time? Any specific tuning? How long did it take to reach that color, it looks beautiful
@HardTail-LA 4 ай бұрын
About 2 weeks after install turned to that color. Now it’s a darker golden color .
@sharkdog111 4 ай бұрын
Sounds great, and looks amazing.
@coreyboren3476 5 ай бұрын
Such a beautiful exhaust
@phatsanauxsonwut825 5 ай бұрын
💚
@Pinozcyclezandridez 6 ай бұрын
I put those mini’s on the front of my Roadglide…sick
@jimmiehoyt729 6 ай бұрын
I ordered a pair,,still waiting
@irgoodfella 7 ай бұрын
Is your clutch lever loose? Just installed and my clutch side is real loose tryna see a fix
@HardTail-LA 7 ай бұрын
It’s a little loose but nothing not to expect from aftermarket products. Any levers I ever put on was more loose than stock Harley levers
@robbydyson2154 6 ай бұрын
Did you reuse the bushing for pin?
@HardTail-LA 6 ай бұрын
@@robbydyson2154 yup
@alexaguilera7084 7 ай бұрын
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@alexaguilera7084 7 ай бұрын
No, that’s what you call motorcycle
@martinbarrett5239 7 ай бұрын
Great vid, can you tell me which forward controls you’re using?
@HardTail-LA 7 ай бұрын
Harley brand
@johncampos5716 7 ай бұрын
looking excellent. Is there a cam in there
@Shellbabyy 7 ай бұрын
How tall are you? I’m currently looking for risers as well
@HardTail-LA 7 ай бұрын
5”11
@roadkinglobo 7 ай бұрын
Nicely done! 👍
@theokomulainen7549 7 ай бұрын
The new age “bikers” tool kit is there credit card and cellphone.
@aspen9062 7 ай бұрын
Lookin’ good homie, real good!
@adriandragseth2220 7 ай бұрын
Nice!
@locoocho2415 7 ай бұрын
Nice install. Great explanation 👍
@palmettolowlife1996 8 ай бұрын
Those are sick ! 🔥 how long did it take to get from kraus from when you placed the order? I’m surprised you didn’t get the matching beringer levers. I’m considering these for my bagger
@franklinbittner4683 8 ай бұрын
Wow beautiful
@franklinbittner4683 8 ай бұрын
If you have the money,go ahead with all carbon for looks and weigh
@jefflpo 9 ай бұрын
Hows the base from The Rockford Fosgate?
@HardTail-LA 8 ай бұрын
lol sucks !!
@chucky8181 9 ай бұрын
Do the side covers.
@rossboss15p53 9 ай бұрын
Just purchased these levers thanks for the info ! Quick question where did you get your carbon fiber tank cover?
@HardTail-LA 9 ай бұрын
Ghost composites
@BM-uj7rt 9 ай бұрын
Where did you buy this kit from bro? Please send me a link
@HardTail-LA 9 ай бұрын
Ghost composites in Los Angeles
@samg9286 9 ай бұрын
Hey man, thanks for the video, i'm trying to decide if i should go with the LP6 OR NOT ( KINDA PRICEY) I have a question: do i really need to install the relays or just plug and play would work?
@HardTail-LA 9 ай бұрын
Hey Sam, glad you liked the video. It is pricey but I believe it’s worth it. At night it lights up everything in front of you. Even during the day people see me when I lane split. Being seen is priceless to me. The kit comes with everything , it’s plug and play and then obviously connecting it to battery tender. Hope this helps
@robertomaniago3871 9 ай бұрын
What brand is the seat?
@HardTail-LA 9 ай бұрын
Hey Robert ! It’s whiplash speed company.
@robertomaniago3871 9 ай бұрын
@@HardTail-LA Thanks!
@user-xd8ze9jk3v 9 ай бұрын
🤘👌🔥
@theneverman 10 ай бұрын
Thing of beauty.
@Marco-hz8vv 10 ай бұрын
Hi!! Can you let me know the thickness of the mini flowboards and if you know how many Nm must be tighten the bolt into clevis?I'm trying to do my own 🤗 I forgot the last thing, clevis are aluminium or stainless steel?
@sammyvices2547 10 ай бұрын
Double sided tape to install the taillight harness on the carbon fender? I imagine it’s safe and won’t have any kind of reaction to the carbon right?
@HardTail-LA 10 ай бұрын
Hey Sammy ! Yeah it’s double sided. It’s stuck on really hard. I just made sure to prep and clean the area before sticking it back on
@sammyvices2547 10 ай бұрын
@@HardTail-LA cool I just don’t want to cause the carbon to bubble or do anything weird on me, thanks
@HardTail-LA 10 ай бұрын
@@sammyvices2547 anytime brotha
@ukv2115 10 ай бұрын
does it come with pairs or u just bought by its for 1400$+ ?
@HardTail-LA 10 ай бұрын
Came individually. There’s a section you can click that says it’s for the left and right side.
@1Thirty1 10 ай бұрын
That pipe is sick‼