HPI Small Block Getting Started Guide

Рет қаралды 373,632

Күн бұрын

HPI's official guide to get you started with your Small Block engine HPI product - All you need to get up and running with your Small Block HPI model

Пікірлер: 92

@dolobrolic6066 9 ай бұрын

It’s 2023 ……still watching this….👍🏾…..thank you!!!

@overcomingobstacles577 4 жыл бұрын

11 years later this video is very helpful thanks 🙏!!!!

@themotivator1698 4 жыл бұрын

SAAAMMMEEE, was having so many issues tuning my nitro rs4 3 evo+ with the T3.0. The G3.0 is basically the same engine to my knowledge so this was still suuupppeerr helpful!

@evarshalomidze 3 жыл бұрын

Same here 🙋🏻‍♂️

@simonpeterdalangpan9761 3 ай бұрын

2024! HPI Perfected this a looooong time ago 👏 💯

@jamesrimmer9002 4 жыл бұрын

Thank you so much, got two buggies up an running perfectly following your guide - superstar!

@lilyfurley9833 2 жыл бұрын

Used this for most of my nitro buggies regardless of hpi they are very valuable information

@bossjoe3 5 жыл бұрын

The best video for toning your hpi engine

@keveshannaidoo5670 3 жыл бұрын

Most helpful video about breaking in .nitrogang baby!!!!!

@mikepro-ww5fg 6 жыл бұрын

hello. hpi. ilove your cars and im glad for this tutorial because my car is old and needs to be fixed. but where i live i cant go to a shop and tune my car. hopefully my car can survive for muself to enjoy it while it lasts

@GSGExtreme44 3 жыл бұрын

Great video - This helped me lots!

@joedoran6994 Жыл бұрын

Great video now my cars run perfect

@xvz_bassline_xvz361 10 жыл бұрын

You only have to break in 1 time but I would recommend using about 7 tanks to make sure u bucket is fine because some people don't 7 tamks amd the people that do use 7 tanks to break. In usually find there bullet is quicker

@Zestypanda 9 ай бұрын

Almost like the original 1993 Team Associated instruction video, but with actually useful cinematography, instructions, voiceover, audio, and illustration.

@christianlillekroken9979 7 жыл бұрын

Thanks, really helpful! xD

@papahunter2038 3 жыл бұрын

very nice tutorial im newbie and a have new nitro i watch and learn how to used this nitro car thank very much

@jingle531 12 жыл бұрын

awsome vid iam buying 1 of these now

@xiongproductions7445 4 жыл бұрын

Legend says that Hpi still likes comments till this day.

@OfficialHPI 4 жыл бұрын

It's not that easy :)

@madhut3042 4 жыл бұрын

@@OfficialHPI haha

@KalibasauRC_64 3 жыл бұрын

Thank for instruction lesson in first time engine rc running

@charlesmcgehee3227 4 жыл бұрын

Nicely done. I have a t 15 and can't get it to stop dying when throttled. Idles great. Starts right up. The base settings described in the manual are not the same as the T 30 you demonstrated. Got me a new T 30 to drop in if I don't get the issue solved. Anyone with an idea please post.

@Awag1000 11 жыл бұрын

no you only have to breakit in once.. but you do have to tune it depending on the weather..the only time you have to breakin a engine is if you replace any of the internal parts like th pistonhead or the sleeve

@TheIEdit 12 жыл бұрын

I love you guys

@xvz_bassline_xvz361 10 жыл бұрын

The new hpi bullet nitro st does not have a low speed needle but if u watch this vid u will get the hang of it . My bullet is ssooooo quick it was a great buy and it is well worth the money but make sure u get nitro ones thay r the best

@drag3777 Жыл бұрын

Thx, HPI the best

@MegaDrifter99 11 жыл бұрын

will most of these tips work for a nitro tomahawk st

@MTNitroRC 11 жыл бұрын

200-250 degrees. Never go over 250. If you do, richen the mixture right away.

@DVStrikesBack 3 жыл бұрын

Would love you to bring back the firestorm

@tiagofabri511 Жыл бұрын

Top...volta pro Brasil

@markgilson1171 7 жыл бұрын

love my rs4 .

@gustavoavina3136 5 жыл бұрын

Mark Gilson what carburetor do you have on your rs4? i have a .18ci 3.0cc engine, the carb is bad, but don't have any idea pf what to get, thank you

@bluebora 9 жыл бұрын

Breaking in is easy, you need to read less and play more I usually on all my cars trucks no mattet what instructions say I run 1 tank on idle, then 2 and 3 tanks of gentle throttle and hard braking every 2,3 seconds each tank upping the length of time throttle is pressed, then after tank 4 u can go full speed, engine will settle over time I rarely need to tune mine and they start everytime with good engine care :)

@MTNitroRC 11 жыл бұрын

Yes, the general tips will work for you car but as for tuning, always refer to your manual. Since this video is not of your brand of car, do not rely on this video, just use the procedures in this video as tips and always refer to your manual for detailed instructions. As for breaking in, use the directions in your manual as different companies use different techniques.

@dmitriy6275 4 жыл бұрын

I'm having problems with my nitro traxxas slash trx 3.3, I dont really know how to tune it, it stalls in the beginning, even when warmed up, then it takes off bit shuts off when I apply brakes

@sajjadali1468 2 жыл бұрын

Hi. I have a tamiya tgs running the HSP 18 Nitro Engine 2.74cc. Have installed the engine. When the engine starts up the all four wheels starts spinning. Can’t get the idle settings or tunning setting right. Please tell me what can I do and how.

@royarsey5429 2 жыл бұрын

can i use a rear exhaust engine with a slide carburetor? thanks...

@Dandydorf 4 жыл бұрын

So I have an HPI nitro MT2 from way back before the 2009 models. I need a new needle bearing and a new bottom plate. The MT2 was discontinued ages ago. It feels like I had no hope.

@OfficialHPI 4 жыл бұрын

The Chassis for the MT2 is: www.hpiracing.com/en/part/73946 It is still available. There are very few left however and we will not be restocking when they are gone. You can find details of all the Distributors currently signed on here: www.hpiracing.com/distributors The needle roller bearings are discontinued. But I know brands like Kyosho also used them under the number LD70. I believe you could also use two 5x8x2.5 ballrace bearings instead.

@johnovandupper3810 4 жыл бұрын

@@OfficialHPI hpi, do u plan on bringing back the savage parts?

@Jawadagha 5 жыл бұрын

Can I do this to tune any nitro RC ? I have inferno st 09

@thenerfergeek325 11 жыл бұрын

200 being a cool temp and 230-250 is safe...over 280 is overkill and richen right away

@rcsharks 11 жыл бұрын

anyone notice that when they are showing needle settings even tho they have engine noise, the flywheel isnt moving

@MTNitroRC 11 жыл бұрын

You only have to do this once, which is when you first buy it.

@brunocastiofficial 12 жыл бұрын

¡Envía sorprendentes

@SuperYASSERARAFAT 12 жыл бұрын

ive had alot of rc car hpi is the hardest to start and break in

@lowellfunk8974 9 ай бұрын

That's because you don't know what you are doing! They are considerably easier than traxxas cars, especially when you're following the traxxas method. Every other manufacturer doesn't have the complicated breaking method like traxxas. I have hpi and traxxas nitro cars for over 20 years now.

@williamoleary9330 3 жыл бұрын

HRP....We need vehicles to be manufactured so we can buy them. When we can buy them you can make money. Nitro Savages. We especially need nitro Savages. Get a Savage KZfaq channel to show off how amazing it is and you promote the channel on snapchat and TikToc. People will come back to you, but you need to start engineering again wonderfully durable great looking vehicles. Especially the Savage line. Nitro and Brushless systems

@NeoJ4K3 3 жыл бұрын

promotion is a key thing they need right now, and a lot of it

@12th.jahlil 9 жыл бұрын

Soooo, you can keep the break in settings, will that damage the engine

@12th.jahlil 9 жыл бұрын

No idiot

@adriengaland 12 жыл бұрын

Look at my firestorm video, is it good ?

@SuperYASSERARAFAT 12 жыл бұрын

i wish it was that easy...lol

@leo17214 11 жыл бұрын

I never got the dvd with my bullet mt

@luckylarsful 11 жыл бұрын

can't get my new t15 nitro star good :(

@141Marios 11 жыл бұрын

is the hpi trophy buggy a small block or a big blog and witch video i must follow?

@cameronhamilton5313 7 жыл бұрын

141Marios big block

@hbxhpikyosho 12 жыл бұрын

a firestorm even... same price, damn durable....

@jepok1019 11 жыл бұрын

do i have to do break in evryday i use...or on just the 1st run of the car? please answer fast

@unknwn0470 5 жыл бұрын

esteven pascual well I’m 6 years late, but you should always warm your engine up

@bismillahquran1152 4 жыл бұрын

scavvyboixd TTV lol

@amitrullay1439 4 жыл бұрын

I have an eco rush. At idle it keeps moving forward and I have to keep the brake on, the throttle dial on the controller is low. I then adjusted the high speed needle and when I start it, it accelerates and burns through the fuel quick. Help!

@thomasozanne5721 4 жыл бұрын

Set the idle screw on the carb so it not reving as high

@alfiecartwright9655 3 жыл бұрын

@@thomasozanne5721 I have the same issue, do you do this when the engine is warm?

@jp_fishing7901 5 жыл бұрын

Can someone tell me how to take the motor out?

@johnmarcos1929 20 күн бұрын

Which RC is this one?

@YeahMan8 Жыл бұрын

I couldn't start my nitro engine, i need help

@Don_Coringa 5 ай бұрын

muitobom]

@SargeScum 3 жыл бұрын

You guys with HPR now?

@OfficialHPI 3 жыл бұрын

HRP Distributing are the HPI Racing Distributor for North America.

@blaqkyellow 8 жыл бұрын

This is really old, why not make a newer version video?

@royarsey5429 8 жыл бұрын

A newer version will be the same..maybe just little more detailed on how he will explain it.

@drivelinetime 7 жыл бұрын

Benny Lara old but gold

@chatevattanavekin3721 5 жыл бұрын

Benny Lar p

@superaidenproductions1870 5 жыл бұрын

That would be good!

@lilyfurley9833 5 жыл бұрын

there isnt a reason to update unless enough people say the instructions are so outdated they are damaging the car

@aBlunt4JCody 11 жыл бұрын

How do you set the gear mesh on the 2-speed trans?

@smoothmt2012 3 жыл бұрын

Not Too Loose & Not Too Tight To Where You Can Pull A Piece Of Notebook Paper Between The Gears Without Tearing It 👍

4 жыл бұрын

Quanto custa ?

@ronniegrey4139 11 жыл бұрын

I have just purchased a BRAND NEW hpi nitro star 15, along with a new glow igniter, new batteries for said igniter and the hpi recommended 20% nitro fuel. I filled the tank, started the engine and proceeded with the factory break-in process. It ran for 1/2 a tank and died! The glow plug from hpi had already burnt out!!! Horrible..

@nitrorcs6374 6 жыл бұрын

Ronnie Grey maybe it was too lean or rich on LSN or HSN. Most likely to lean