Huben GK1 - A3 Tactical Modular Folding Stock

Рет қаралды 7,853

3 ай бұрын

Due to customers requesting a walkthrough on how to reconfigure the A3 Tactical Modular Stock to best suit the Huben GK1, we created a little how-to video.
After being able to use the A3 Tactical Modular Folding Stock for awhile, we have found this to be one of the best options for a folding stock on the Huben GK1! With the extension piece reconfigured, this allows for proper cheek weld relief to use a low mounted reflex optic. Great quality piece of kit from @a3tacticalinc.125
*correction on the length - 8.625"
If you missed the Huben3DParts Rear Picatinny Adapter install video, find it here - • Huben GK1 Rear Picatin...
Visit us at Huben3DParts.com
*Standard Disclaimer: This installation video is provided for instructional purposes only. While we strive to ensure the accuracy and clarity of the information presented, the installation process may vary depending on individual circumstances and skill levels. By following this video, you acknowledge that you assume all responsibility for the installation of the rear Picatinny adapter. Huben3DParts shall not be held liable for any damages, injuries, or malfunctions resulting from the installation or use of the product. We recommend consulting with a qualified gunsmith or professional if you are unsure about the installation process or encounter any difficulties. Use of this product is at your own risk.

Пікірлер: 31

@PFunk609 3 ай бұрын

I Neeeeeed the top picatinny rail with shroud and tube cover. looks sooooo badass. Make ooooooonnnnneeeee! But seriously, nice work 👍

@Huben3DParts 2 ай бұрын

I have so many projects that need to get finished up right now, heh I can def add those to the 'wishlist'!

@samuelsherwood298 2 ай бұрын

Bravo brother 👏👏👏 I will be buying one of these from you soon! Love it!

@PFunk609 2 ай бұрын

Yesssss! But of course take ur time and do ur thing, ur stuffs awesum.

@LessLethalDad 2 ай бұрын

Pretty cool

@Huben3DParts 2 ай бұрын

Thanks!

@gavrilobtc5532 5 күн бұрын

Hi folks, are GK1 foldable shoulder parts available for sale? Where I can buy them?

@LonGin-gp2cr Ай бұрын

Where did you buy the picatinny screw on rails?

@Huben3DParts Ай бұрын

Check us out - Huben3DParts.com

@SamSwaggler 2 ай бұрын

Thanks!! Nice setup… How does it interact with the side of pistol (when folded)?? Will it allow everything to operate? Fingers crossed that it does…

@Huben3DParts 2 ай бұрын

It does block the mag release from fully extending. I'm able to operate the safety without any issues. So in regard to pew'ing when folded, I'm able to no problem. I recently mounted a thermal on it... 😁

@SamSwaggler 2 ай бұрын

Thanks for your help!your shared info is saving me the trouble and the time!!! Cheers

@robmack151 Ай бұрын

Great question.. I was curious about it clearing the pressure gauge myself, but I guess that answers it. Now I just wanna see it folded up and PEW'd 😂

@robmack151 Ай бұрын

Does the stock lock in Open or closed positions? Great adaptation... looks clean and sleek, just like the GK1. Now if only they'd drop a .30cal version!

@Huben3DParts Ай бұрын

It doesn't really 'lock' closed but there is some tension when it's folded up. It does lock in the open position

@robmack151 Ай бұрын

@@Huben3DParts well that's a good start. So what portion of that do you sell, the stock adapter or the entirety?

@TKO593 Ай бұрын

I hope they just come out with a production carbine just like this.

@henrywilliams5458 Ай бұрын

Got the a3 tactical stock but it doesn’t fit the adapter I got from you .. am I missing something

@Huben3DParts Ай бұрын

I messaged you back this afternoon, it looks like they sent you the 2 bolt version not the Picatinny version.

@henrywilliams5458 Ай бұрын

@@Huben3DParts ok I’ll contact them tomorrow… thank you for the quick response

@Huben3DParts Ай бұрын

@@henrywilliams5458 you bet, sorry I wasn't able to take your call earlier. Was at the office job til after 6 tonight, let me know once you get it squared away!

@henrywilliams5458 28 күн бұрын

@@Huben3DParts got the picatinny version and it works great. Thanks!

@blairmarkus3416 Ай бұрын

What's the optic?

@Huben3DParts Ай бұрын

That's a little RMR reflex/red dot sight on our rear sight mount

@blairmarkus3416 Ай бұрын

@@Huben3DParts Trijicon?

@Huben3DParts Ай бұрын

@@blairmarkus3416 no, cheaper uuq. But a trijicon is compatible as well.

@JuanManuelLopezperez-zu4vc 16 күн бұрын

😊@@Huben3DParts

@lucienthirion2806 Ай бұрын

Hello Huben3DParts, please send me the information to purchase the GK1 shoulder parts. Be well and stay healthy,@+, Old lulu, I'm 76 years old. Bonjour Huben3DParts, merci de me transmettre les infos pour acheter les pièces pour épaulement du GK1. Porte toi bien et garde la santé,@+, Le vieux lulu, j'ai 76 ans.

@jshvl_2461 3 ай бұрын

They need a rubberized grip or something

@Huben3DParts 3 ай бұрын

Yes, definitely need some grip options. A few are coming out with AR grip adapters but I don't like how those tend to push the grip further down/raises the CG of the GK1, personal preference since I still shoot the GK1 as a pistol quite a bit. I do have a grip project that I'm trying to finalize but those will be in CF polycarbonate.