Huben GK1 Red Dot Sight V2 Mount Installation

Huben GK1 Red Dot Sight V2 Mount Installation - NEW Design

Рет қаралды 8,368

5 ай бұрын

Mount available here:
huben3dparts.com/products/Hub...
+++++++++++++++++++
This is the installation video for the custom Rear Sight Mount v2 for your Huben GK1.
Please follow the installation instructions and let me know if you have any questions!
This mount requires NO drilling/tapping of your GK1. It repurposes a feature on the block meant for an internal purpose for external purposes, this is on newer GK1 blocks sold in non-powered restricted countries.
*Mount and interface to GK1 is Patent Pending
**Standard Disclaimer: This installation video is provided for instructional purposes only. While we strive to ensure the accuracy and clarity of the information presented, the installation process may vary depending on individual circumstances and skill levels. By following this video, you acknowledge that you assume all responsibility for the installation of the rear Picatinny adapter. Huben3DParts shall not be held liable for any damages, injuries, or malfunctions resulting from the installation or use of the product. We recommend consulting with a qualified gunsmith or professional if you are unsure about the installation process or encounter any difficulties. Use of this product is at your own risk.

Пікірлер: 35

@5euk 5 ай бұрын

It looks really neat mate. 👍🏻

@Huben3DParts 5 ай бұрын

Thanks! 👍

@robertweichmann1359 4 ай бұрын

Caution! Huben does not intend for that front power limiting screw to be removed. On my newly purchased GK1 it was secured in place with the equivalent of red locktite. If you try to force it and round off the internal allen flats you are pretty much screwed. It will come out but you must use precautions. Make sure your allen key fits very tight. Dip the tip of the allen key in Ajax to allow a better grip. Use a soldering iron with a pointed tip to heat the screw before you try anything. If you see a wisp of smoke while heating you have gone far enough as the sealant is melting. I hope yours comes out easier than mine but if it gives you alot of resistance be careful.

@Huben3DParts 4 ай бұрын

Thanks for the heads up Robert! You're the first I've heard where it is loctited in place! I will reach out to a vendor with a couple questions on the new batches.

@TeddysVentures 4 ай бұрын

Great video, and it looks like it will fit in a holster like the "Toomy Leather" with the Red Dot V2 mount. Which Red Dot did you install onto the mount in your video?

@Huben3DParts 4 ай бұрын

Thanks! This is actually a cheaper tru glow--I use it for spec testing after the mount assembly is done. It's not bad for the money though!

@TeddysVentures 4 ай бұрын

@@Huben3DParts Thank you! I may try a Vortex Venom Red Dot.

@faraci5617 5 ай бұрын

So is the benefit of the new version that you dont have to create the gap in the shroud to instal?I have the new Gk-1 version but your V1 mounting plate.Damn i just ordered your loading gate it arrives tomorrow,i could have had this version also on the product review video😖

@Huben3DParts 5 ай бұрын

Yes, don't have to loosen the barrel cover with this version. Has two mechanical (bolts) mounting points as well. Both versions functionally do the same thing, but the original was a necessity of the block design. The new block derivative has that front feature for some some of internal speed/power regulation--but I repurposed it for external use if your gk1 isn't restricted.

@jeffvndeperre1262 3 ай бұрын

Nicely done ! Do you also ship to europe ? And are you planning to make a underbarrel rail aswell ? i might be interested in that. greetings

@Huben3DParts 3 ай бұрын

Hi, yes, most of Europe is available with international shipping service. We are trying to finalize our low profile picatinny tube mount--likely a few weeks until that is released.

@ahkom1104 Ай бұрын

能运送到中国吗？@@Huben3DParts

@jeanmamadoulescandinave247 5 ай бұрын

I put my red dot on the rail and it works as well as if it was mounted in front. It's just a question of aesthetics.

@Huben3DParts 5 ай бұрын

Aesthetics and sight preference. On my 'normal' hand held pew pews, my reflex sights are all rear slide mounted. I didn't personally like the additional movement from a mid-barrel mount with the GK1 so this makes it feel more like how I have my pb pistols setup.

@jeanmamadoulescandinave247 5 ай бұрын

@@Huben3DParts personally my red dot mounted in the middle of the barrel does not hinder the precision.🤷‍♂️

@martymac5372 3 ай бұрын

I purchased this, and just got it this morning, and just went back to your website. Then realized that I don't even remember what version that I got. And it is not marked, nor is there any paperwork denoting the style, I have a CV life Red dot mounted on it now with a 11mm to picatanny adaptor, it looks clunky and to far forward. But looking at the dot I have it won't work with this adaptor plate. I must confess I don't own any firearms just airguns, so I have no idea what the two versions of this adaptor even mean when buying another red dot. I do know that I don't want to spend the $200 plus for a Holosun. It isn't rated any higher than anything else on Amazon. But is a lot more expensive. The CV Life is very nice but won't work with your adaptor. Any recommendations ? And what is RMR and DOCTER? Sorry for being ignorant of these mounting patterns and what and why they are different. Don't even know which one I picked. I guess I must have?

@Huben3DParts 3 ай бұрын

Did you email me already? I think that may have been you I responded to this morning.

@markobrien4876 4 ай бұрын

Will this work with a Donnyfl Yokozuna attached ?

@Huben3DParts 4 ай бұрын

Corresponded via email, but to answer the comment, yes it will. Slight creep into sight window is all.

@user-xx8mr1gn9p 3 ай бұрын

I just received the RMR pattern adapter. My GK1 V3 does not have any screw there, should I order the original?

@Huben3DParts 3 ай бұрын

Email us with your order number, etc - huben3dparts@gmail.com

@Jeeper1378 4 ай бұрын

Got mine … installed… need a site now haha

@Huben3DParts 4 ай бұрын

😂 sounds like some more decisions you have to make! Have a couple picked out that you're looking at?

@Jeeper1378 4 ай бұрын

@@Huben3DParts not yet

@stephanefernandez3830 5 ай бұрын

nice

@Huben3DParts 5 ай бұрын

Thanks!

@PFunk609 3 ай бұрын

i just ordered a gk1 one this week. Am i safe to order the v2 mount or should i wait to see which model i get? i do not live in restricted country.

@Huben3DParts 3 ай бұрын

Honestly, I would wait until you receive it.

@PFunk609 3 ай бұрын

@Huben3DParts Will do. Ty sir. I believe its arrivin 2day so ill find out.

@PFunk609 3 ай бұрын

turns out i got the v3 so its a good thing i waited. i ordered the original plate. cant wait to put my red dot on there.

@Huben3DParts 3 ай бұрын

I should be getting yours packed up tomorrow night after I'm done at the office!

@PFunk609 3 ай бұрын

@@Huben3DPartssweet. very much appreciated. No rush, do ur thing.

@luillimatute1989 4 ай бұрын

What happens to the spring?

@Huben3DParts 4 ай бұрын

The spring that holds up the rear sight? I remove it completely and put it in the spare parts bag.