Thanks for taking the time to do this video guys

Super, Hyper MERCI Tu es gentil de présenter cet outil de cette façon simple et rapide en détail. Merci du Québec.

I brought one after watching this and referred back to understand it more, thanks.

Great tip about the angle bead magnet and the wood block

Great video. So many reviews don't go through the set up and actually using the levelers.

I brought one couple weeks ago, is 12 lines, comes with remote control, fantastic tool, for good value . All lines visible in sunny day.

Thank's for this one, very useful info !!

This is a great tool

How is it holding up? Did you manage to check the accuracy? It is indeed very tempting to go for one of these cheaper ones, unless you are a bona fide pro builder that uses one on site every day

Target is widely used by suspended ceiling fixers , as it's magnetic it attaches the the grid 👍

Nice work

I bought a heavy duty 6 foot Dewalt tripod for it. Seems to work great.

Good idea with corner trims, great job. What pain did you use to finish that shelves?

Nice tip with the wooden block.

Its been my experience that the target is for suspended ceilings. You use it to level the metal grid. Attach your laser to the wall and use target to level it. My laser clamps to the track so no screws in the wall.

Are the vents at the bottom to allow ventilation into the media centre? Is there a build video on this built-in unit? A new subscriber to your channel.

often the drywall corner bead will hold the magnets, I also use an ikea hanging bar or a camera tripod

You can also use the target instead of your block

Great video! I notice you cut the carpet. How do you fix the carpet to the floor after your cut? Do you install another tack strip and stretch it?

Your last video was good, but this one is on another level!

Target really helps when the you are in a bright space and\or at further distances.

Hi mate You need Dewalt DWO882 mounting pole. Perfect for your set up needs. The mount thread is a standard size it’s about $120

Hey guys! Nice video. I have a quick question. I think I saw also a dewalt laser that you have, if I'm not wrong, how good is the huepar compared to the dewalt? Thanks!

Use the plasterboard screws on the corner points to mount the level 👌

Use a quick clamp to clamp a panel saw to a door and then the magnet with grip onto the panel saw. Not in contact with the floor and no fixings to tidy up afterwards.

Do you have any of the DeWalt green lasers you could compare this against?

Looks good but how often do you need to change batteries though ?

thanks

Weld a base on the bottom of your metal to make it portable to put in any corner are stand up anywhere

Hello I bought the model up from the one in the video and I also purchased this ( Laser Level Mounting Pole 3.6m with Tripod Base Floor to Ceiling Support & Bracket + Adapter 1/4 and 5/8 + Bag on Amazon) not cheap but not overly expensive either and they work flawlessly together take a look. Hope this helps. If you need a direct link let me know.

You can buy a telegraphic tripod used for photography lighting (pretty cheap) the thread will probably fit

How high do you make the alcove units

How far can you see the laser outdoors in daylight? I recently bought a Bosch laser and returned it because you can literally not find the line beyond 3m distance in daylight.

Could I use this to level some concrete spur posts I’m finding in my garden?

Buy a cheap plaster board support it can be fitted in doorway or floor to ceiling and being metal the magnets hold the level at any height

Try using a plasterboard prop that’s what are use the magnet sticks to it great you can use the floor and the ceiling for the prop

Hi How are you finding the laser level now is the level of good quality does it seem like its worth the money

how did I manage to take a line across 2 points, and the laser shows level in the center but the 2 ends across 25 feet shows that it is about 1/2" lower? Meaning my lazer is dead on with the string in center, but at the ends the string is higher, as if the string has a bow in it...but it is not touching anything. HELP?!

The target is more for longer distances or bright environments.

7 months on would you still recommend this and do you use it on every job?

Hi did you get the link l sent you? It’s in the comments under my name

how the magnet hold with the time of use?, if the magnet will no fall from the plastic and heat

this huebar laser brand good??Any bodey good or bad exparience??

Did it get ceiling as well

Buy a telescopic quick support rod with laser level mounting bar and you can use this anywhere.

Cheap amazon laser, festool cases under table. Something interesting there🤔

what software do u use

Mine was half inch off at SIX FEET

You fitted an IKEA kitchen? I am lost for words😂

Hello how are you getting on with the laser now youve had it a while as some mixed reviews on amazon some say it eats up batteries

How do about battery long lasting?

Use corner angle bead

Magnet strong how are company able to make good levels for good prices.

I heard that one big retailer of these is binning them due to too many returns >The quality of the switches etc is poor

Quero ver linhas no chão tirando esquadro

Cost 95€ on aliexpress

Use a tripod?

These are £129 on Amazon I think ???

У коллеги такой же есть

Ele tira esquadro no chão pra assentar piso no chão

Should always level to either the bottom or top of the line, never the centre.

Hi use the target instead of the wooden block

I think i will spend the extra money for one that is rechargeable costs less over time

Buy the fine adjustment accessory.

I just got mine today. It sucks. Lots of ghosting and fantom lines. No it’s not dirty, and I bought it directly from the manufacturer.

Where do you live bud? Sounds like you have big rats in the background?

$$$

Ok, I looked at a number of levels cheap and expensive and decided to stay away from one for the time being even though I'm a big gadget fan myself. The main reason being they're not as accurate as we may think - Skill Builder did an episode on it. Another reason is price. The one robust and accurate enough for my needs costs far too much just now. Finally, battery life is generally poor and Makita don't do an 18v version which is ridiculous. One minor disadvantage is quick and efficient mounting which none of the manufacturers seems to have come up with a real good solution for. Not so long ago all chop saw makes had laser versions which we all know now is just a waste of time. So, I really appreciate your review as I did sincerely consider this manufacturer myself. Have lots of fun with your new toy guys!

Get yourself a tripod mate

I bought it , returned it and now they aren't meeting their commitment to credit me. Don't trust this company. Thought you should know what is behind your marketing .

crap laser no argue on that.

Why make a video until you have it sorted out?Nobody wants to watch boys playing