AND THE WINNER OF THE DOVOH 3D Giveaway is LEEFAMILYLEE5877 you are the DOVOH laser Winner! The winner was selected by using a random comment picker so that it was fair! Please email me at justin@bitnerbuilt.com with your shipping address. Please also send me a screenshot showing you account name at the top (so I know its you emailing me) Thank you to everyone for all the great comments and laser level uses!

Thank you for choosing our Dovoh laser level. Dovoh is a leading manufacturer of self-leveling laser levels with more than nine years of experience. We are committed to providing high-quality, accurate, and durable products. Dovoh Laser Level Provides a 2-Year Warranty 5-Year Accuracy Warranty. We hope you enjoy using our laser level and continue to choose us for your future needs.

Also great for insuring that your joists and furring strips are level wit one another before hanging ceiling drywall. Especially in a basement with low 7’ ceilings where you are more likely to notice waves in the drywall. Enjoying your KZfaq channel. Keep up the great work!

Justin, it's great that you're at a point to get things to give away. I too had a level that ended up needing repair (I think I just wore it out using it so much) and couldn't bring myself to have it done. Therefore, I'm in the market for another and this video is very timely. Of course I'd love to be given this one as I've been using regular levels on all of the projects. - Chris

Thanks for the ideas Justin! We're moving into a new house next week, and I would use it initially to help hang some shelving, then the deck I'm planning on building, and finally in my new workshop once I get it going!

I’m starting to build my shop out and this would be great to get my cabinets straight. Also just moved so we have to hang pictures. Thanks for the videos, they are always informative.

I would use it in variety of ways around the house, but my main use would be installing signs for clients. I typically also install display posts so this laser would assist in assuring that the post are plumb. Awesome content, keep up the good work! 🤞

Love the show. Starting a handyman business so I would use it everyday. Appliance leveling is another great use for a laser level. Would really appreciate a new one. Thanks

I would use the laser several ways, most of which you listed. Leveling wall hangings, shelving, installing cabinets, landscaping to grade, and anything else I can think. I love your videos!!! Keep them coming.

I have a tonne of tiling to do in three bathrooms and a kitchen floor - this would be a massive help and I didn't even realise until I saw your vid - props to you

Been really enjoying channel so far. Appreciate how different your perspective seems to be from typical channels. Thanks! Could def see using that for some french cleats in the near future...or avoiding the hours long arguments over which picture frames are NOT level when my wife finally gets me to re-do our wall decor with all the new baby pictures.....

I've been itching to install french cleats in my workshop but I've been waiting until I can purchase a laser level. I would most definitely use it for that purpose first. Thank you for your great content!

I am in the middle of a kitchen remodel and could use for numerous tasks that you mentioned. Been looking at ones at the big box stores but have not pulled the trigger. Thanks for the opportunity to win one.

Great piece on laser levels. Thank you for your post. I’m a new wood worker and I’m in the process of building out my shop. A level like this would be indispensable.

I bought the same basic model to use for my basement remodel (a WETOLS green 3-axis, for wall layout & dropped ceiling)... thinking I'd rarely use, but I've reached for it so many times over the last 3 years that it became a must-have IMHO. I'm literally using it this week for can/pancake lights and molding for my family room remodel. Saves so much time and worth every penny. Do yourself a favor and pickup a few extra laser targets (2-4 of them)... they are super handy for ceiling and flooring layouts.

Great demonstration. I am adding ready to start adding a station for my chop saw. Once that is completed then French cleats. I am also pricing out a small remodel for the upstairs of my home. Assuming that estimate meets my budget requirements then I would be using it to add a bedroom from current attic space and take a bedroom we currently have and convert it to a hallway and small office.

Always enjoy your videos. Preparing to pour a pad and build a storage building, need more shop space. There are so many possibilities for the laser in construction of a storage facility. Thanks for the opportunity. Keep up the informative videos.

Looks like an awesome laser level that would come in very handy. I definitely could have used this when I was hanging five 36"x60" mirrors in my shop/gym a couple of weeks ago. If I win, I would use it to help hang cabinets and an eventual french cleat wall that I'd love to add to my shop. Love and appreciate your channel, this content is awesome. Good luck everyone!

I am just about ready to start tiling my bathroom (major honey do!). The level would be a great help! Thanks for all the great content!

I also appreciate this kind of sponsored video, where you tell the ins and outs of how the product actually works. I was surprised at the great price point too! I like guessing, and was way off. 😄

Looks like a well designed and constructed unit! My immediate uses for it would be hanging all the pictures in my 86 yr old mother’s house (we just moved her recently), and to install some French cleats in my shop.

Being I’m in the process of building out my shop I would start out using it for setting my cabinets , French cleats and other fixtures. After that I have many projects that it would be invaluable for. Btw thank you for all the information and the great channel. I found you 2 days after launching and have been a sub ever since. You have quality and entertaining/educational content. Appreciate all your hard work

I am going to be tiling my shower and this would be super helpful! Thanks for the content!

So many possible uses! I have some very high cathedral ceilings, and want to hang artwork all over the tall walls, but also want them to not look all wonky and crooked or poorly spaced. This would be extremely helpful! I’m also setting up my new shop, and could use it for delving into Lé French cleat system. Another good possible use: Laser sharks

Would come in handy for my furniture installs and raise panel ceiling installs, love the content thanks Total Built by Steve

Thanks for another great video. I have a new workshop and a laser level would be a great addition to my toolbox. I’m in the process of installing a French cleat wall and building workbenches and take off tables.

There are several projects I can use that for, but upcoming I am remodeling my house and my shop so that would be very useful for all that you demonstrated in the video, I will be doing electrical, plumbing flooring cabinets and so much more

I have enjoyed (and subscribed to ) your channel ever since that awesome tour of your two-car-garage shop, which I still pop in and out of as I attempt to re-organize my own 2CG shop. Besides the great uses you showed, I've used my (very old) laser level to make sure projects with viscose liquids like epoxy resin and flow paintings are level (or at the angle I want.)

Wow how timely. I'm having my dream shop constructed and I can really use one of these to insure my shop cabinets , miters station and other planned shop projects are level.

Great tool looks well built and designed. I'd use it for my floors pot lights cabinets as I reno house

Hi - I have an 120 yr old home and am sistering joists and trying to level a ceiling for some new drywall and then plaster. I need something tough, reliable and with multiple connection/attachment methods - this seems like a good product! FYI I subscribes because I like your presentation style!

This is is great for leveling my shop as my concrete floor is not perfect so I need to level out everything and get my shelves and all my tool hangings perfectly level

I would use this laser for putting in cabinets, shiplap, recepticle locations and many other uses I will find as the honey do list grows. Keep up the great work and love how fast your chanel has grown in such a short period of time.

Will use it to install chair molding and crown molding in my home. Looks like a great product with many useful accessories. The green lazer is definitely the way to go. Must more readable than the red

Justin, this thing is awesome. I was actually looking at these yesterday and have it in my amazon cart. Was just trying to research it a little more since I had never heard of Dovoh before. I am getting ready to start construction on my new shop in a few weeks and this would be a huge help in laying out footers and joists, as well as a whole host of other uses. I think you have sold me on it, that is if i dont win the giveaway. Keep up the great content. Youre well on the way to 10k.

Great video again. Thank you. I would use the laser at building my workshop, but i already own one. And there great. So let somone else win with the best idea! Its a great tool to have.

Great tips! I would probably use it - at least initially - for installing French cleats in our garage (my workshop). I have plans for doing that, & have NOT been looking forward to using my regular 4- or 6-foot i-beam level! Another cool use, at least for laser levels in general, is doing hand lettering. You can tape your paper/card/envelope/whatever onto a mat with a grid printed on it - lining the top or bottom edge of what you're writing on up with one of the grid lines on the mat - and then position your laser level so the beam shines across the paper. Of course, you have to line the beam up with a line parallel to the one the edge of your paper is lined up with, but it gives you a visible guideline to help ensure you keep your writing from going wonky. Not sure how or if that would transfer to woodworking (maybe painted signage...?), but I still think it's pretty cool. I make handmade greeting cards, & learned this from another card maker on KZfaq (where else? LOL). Anyway, thank you for sharing your tips & tricks, & for doing the giveaway. Have a wonderful day!

Great video! I’ve never actually thought about all the ways a laser can be helpful. I’ll definitely consider getting one!

Great to learn about alternatives to the big brands. This would be great when working on a pad for my above ground pool to check the grade!

If you're a chair maker (or chair dabbler like me) lasers are a godsend when aligning chair legs for correct, consistent, splay and rake when you're drilling. I also used one when installing windows and French cleats (which is how I found your channel in the first place) to turn that shed out back into a shop. That micro-adjust plate looks like a great add-on for any laser setup. Dang.

Thanks Justin. Just found your channel a couple of weeks ago and working through your previous videos. I would use a laser level to hang art on my walls.

Another great video! I would use a laser like that for leveling the table on my pillar drill and band saw table and to make sure my mitre saw blade is at 90 deg to the table. I'm sure I could find any number of other uses for it around my home and workshop. Jane ❤

I have been looking for a new laser since my old one died a miserable death (a certain young lady neglected to remove the batteries the last time she "borrowed" mine). The timing is impeccable. Even if some other lucky sot wins, I still plan to buy one. Since you recommended the DOVOH, I'd seriously consider choosing from their product line. My next project is to run EMT and additional outlets in my workshop. This would be invaluable to make sure the tubing is installed level. Great video!

Thanks for the great video. I would use a laser level for a number of projects, the most pressing is I am planning on doing a full built-in closet remodel in our master closet. Cheers!

Hey Justin, keep up the great videos you do a great job on camera and I think it’s bound to take off. I just bought my first house and can think of a ton of uses… extending our deck, shelving, French cleats… it’s a very long list.

This does look like a great tool. I need to make changes in my shop. I plan to add more french cleats.

Thanks for producing great content. Good luck on growing your channel. This handy tool would replace the small torpedo level for medium size jobs around the house (hanging stuff on walls) and leveling cabinets in the garage/workshop build out.

Need to replace lap siding on my house. A laser level would be great for that. Love your videos, please keep up the quality work.

Nice Vid, have subsribed , easy to follow instructions and practical information on the product and its uses. I have been in Glazing and Building for over 40 years in Australia and your the best one I have seen since Al on tooltime . 😉

Really liked the video... It's almost like your reading my mind! 😮 I'm in the process of remodeling my 20x34 shop... I purchased a good Lazer level based on the brand... wrong decision! The batteries don't last, maybe 4-5 hrs of use before they need to be changed out. So I bought the rechargeable ones and the last about 2½ hrs and have to be changed! When I was installing the 6" dust collection system and the 10 @8' LED lights (suspended) at 8'h, it was a real pain being in the middle of the project to take it down, change the batteries and then reset the Lazer to get back to work... allot of loss time messing with the Lazer! Better word would be frustrating! I was down to the last 3 lights when it went down again! I was taking it down (to replace the batteries, I lost my footing on the last rung and it slipped out of my hand...needless to say, no more Lazer. Yep, you guessed it - not covered by warranty 😢 so almost a total loss! Ended up using a line level to get the job finished. Haven't had the money in my budget to get another one. Being 69, I think I might have overstepped doing a project this big, but still enjoy a good challenge 😊... just wish I was younger... don't we all. Haven't heard of this brand... but really impressed with this blog and the capabilities ... my broken Lazer didn't have the same capabilities and it cost me almost three times as much (on sale)! I've gone back and watched every one of your blogs... Your honest approach and presentations are really great 👍 Keep up the great work... I know your channel will grow! 🎉 Hope ya have a blessed day 😌

Great video! I would use for hanging pictures and doing tile layout.

Great video Jason looks like a great laser . I would use it to help me set up my new shop that I’m getting ready to make shop cabinets. Can’t wait to see the rest of the trailer build also.

I have a laser level (not as nice as this one) that I've used for a number of projects. The simplest was probably hanging pictures at the same level. I also used it to build shelves in my garage to make sure they were nice and level. I even used it when helping my friends finish their basement. I specifically remember using it for the tiled herringbone pattern we built in the shower which we are extremely proud of. They have so many uses that I didn't anticipate when I got it.

Seems like a well built unit. Hell, I'd by the jack plate by itself! lol As you were cycling through the different modes, I noticed it has a plumb bob setting which for an electrician, (me) would work great for laying out lighting.

In my case this would be great for boat building as the the surfaces in a boat are not often perpendicular to one another for reference. Great vid Thanks.

Help me build my French cleat wall that I am planning to start work on soon after watching your excellent video on French cleat basics

I would love to use this Lazer for my home remodel. Thanks

I would look forward to utilizing it to install kitchen cabinets and level kitchen appliances, art work and closet rods.

I’ve still not installed those French Cleats on my wall yet. Using a DOVOH laser would be ideal for getting that first bottom row level. I’d likely also use it like you showed, to get fence posts level and plumb, when it comes time to replace them. My wife is always hanging multiple items on the walls and wanting them level, but we end up off-setting them . 😂 My wife has also asked me to make some sort of cabinet/shelf feature in our TV nook. Having a multi-line laser would definitely be of use during that project!

It would be great from leveling cnc setups and builds as well. Great uses for the hobbyist.

Enjoy your vids. I would use a laser level for several things but cabinet install, including a miter station, would be great!

Thank you for this video. I would use this to continue to frame out my basement shop. I didn’t use a plumb line in a short wall underneath my basement stairs and every time I go up my steps, I embarrassed and see how such a tool is a necessity.

My wife and I bought a 100 year old sears and roebuck house. This house has been completely gutted and needs a lot of framing work done. I could definitely put this level to good use.

You have come far pilgrim! Keep up the good work.

I have been loving the channel. Keep up the great work!

Btw, I forgot to mention something. When the alarm went off on your laser level, it bothered my cat who was lying on my lap next to my computer. I tried to reassure him it was just the video, but he wasn't buying that. He has resettled himself, though, so no harm. :) Keep up the great work on your channel - I really like your low-key, no-nonsense approach to things.

It's just what I need for those pesky crown moldings. Plus it would sure be handy for hanging all my wife's mirrors, pictures and various wall hangings.

Just starting to learn all the different uses of a laser level in our new house.

I'm moving into a new house in 3 weeks and there will be so many uses. We'll be hanging tons of pictures, mounting TVs, followed by lots of wall trimmings.

Seems well built.

Love to have one at work. Installing multiscreen tv’s, this Dovoh unit would make it seemless.

Great video, question please: is the indoor 4 adequate for most outdoor jobs when there is no precipitation?

👏show de bola! greetings from Brazil!

Great tool

Love the laser level. I need one to run a sidewalk I'm putting in from the house to the shop.

really cool tool. i need to finish my basement. great video

I've been looking at laser levels fro a couple of months now, trying to decide what to buy, and then you make this video :D. Our house was built in ~1948, and I don't know if anything was square in it ever. Getting ready to do a patio, privacy fence and a ceiling in the basement. I'm finding string to be a challenge. I have some trauma issues with water, so using a water level isn't going to happen. The biggest thing w/ these laser levels I've been looking at is the distance. Use case is inside vs outside. I can find one that's usable inside.... but not outside. So if the K3 won't work outside... please pick someone else and tell me to buy the K4 :D

Hello there. Love your videos. I could really use this level. My daughter and her husband just bought their first home. I have a list a mile long of projects they need help with and this laser level would really make things easier. I live 2 minutes from the border, so I have a U.S. shipping address available. Thks again for your videos.

One thing I’ve used my laser level for is when making shop cabinets. My, as most, garage floor slopes towards the garage door. I’ve used my level to simulate the surface of my bench and then measure the height of that surface to the floor to make legs that accommodate for the slope. Not the best description but hopefully understandable.

My next big projects include installation of 46” x 96” barn door I have constructed followed by installation of 10 ft x 15 ft wall of entertainment center cabinets I have designed and are to be made - both for my daughter’s home in Dripping Springs, TX

I am currently remodeling a 1910 craftsman house and would find many uses. The rebuild on the kitchen comes immediately to mind. Would love to get one! Please sign me up.

I would use it to 1.nail half wall trim molding. 2. Hang track lighting on a celieng in a hall room to make sure they are leveled.

I need to get me one of them. I'd use it to make sure all these cleats are level.

I'm interested but wondering if it would work for aligning my garden beds. That's my main concern. Worth a try?

We just bought a house, so I could use the laser around the house for all the upcoming projects! And there will be a ton of projects :D I don't know if you mention that in another video but here my question: Are you a contractor?

For installing dust collection duct work around the shop, both vertically and horizontally!

Sole proprietor of a custom woodworking business here. This would be used in a great deal of products I craft on a daily basis. I would love to have this unit, as the unit I have currently is nowhere close to the quality of the unit in your video.

As a disabled veteran, I need the extra hand to do around the house projects to help do those OCD accurate projects that need to be done.

I use a laser level in my upholstery shop to level chair parts and adding fabric pieces and applying tufting and buttons in a straight line. I purchased a name brand laser a couple years ago and it was great for a couple weeks then the company basically said too bad. Would love to have a good quality laser to use every day

I would use it for a ton of different jobs around the house but I'd start with the paver walkway I'm going to put in around my flower bed.

Could use it for floor deep foundations and wall tiles

I sold precision sensors. If something happens to a certified instrument (inadvertent droppage) you need to recertify the sensor or recalibrate it. I cringed when you intentionally knocked this tool on the floor. I know about the lock assembly but I would check the level out before using it again. I think a procedure would be simple by projecting a line on the wall and rotate it 180deg to double check. I have a similar unit that you showed and love it! I’m going to buy one of those micro jacks you showed.

I am about to move house and move into a blank slate garage workshop space. This laser level would be invaluable for numerous things I will have to do such as: installing wall cabinets, ceiling lights, wall hangers, floor cabinet kick plates etc etc…

I recently helped layout the chair set of 5000 chairs. This would have been invaluable.

I would use it remodeling my kitchen.

I was about to order the one featured in your video but the discount code is not working. The code for the outdoor one does work by the way.

how do you do No. 16 Drainage & Slope? Does my laser level *need* a pendulum lock to prevent damage to the pendulum? will the laser work when the pendulum is locked?

I would use it to install level french cleats in my shop

I use my old dilapidated lase to set block, brick etc.

Subway tile installation……garage cabinets…..hanging pictures