Raised Two Tone Cedar Planter

Рет қаралды 65,910

Жыл бұрын

A simple, but stylish Cedar Planter that's inexpensive and easy to build. Using 3 cedar fence pickets and one cedar-tone 2x6. It's great for building and selling. Also, it fits a planter tray!
*Project Plans*
Raised Two Tone Cedar Planter
www.bearmountainbuilds.com/pl...
*Products Used*
90 degrees positioning clamps:
amzn.to/3Tm5Ttd
Planter tray:
amzn.to/3ZzxCra
Rigid Brad Nailer:
amzn.to/3T3vnKf
Paint Spray Tent:
amzn.to/3KkTcLl
Rustoleum matte black spray paint:
amzn.to/3muXTIo
Glue Brush:
amzn.to/3YzxoyI
Glue Roller:
amzn.to/3YBrwVT
6'' Clamps:
amzn.to/3IARLqM
12" Clamps:
amzn.to/38oDWMZ
Bosche Miter Saw:
amzn.to/3i8gdVz
Delta Table Saw:
amzn.to/3WL7d7s
Titebond II wood glue:
amzn.to/3ymr5nN
*MY GO TO TOOLS*
100'' Straight Edge Saw guide:
amzn.to/3UhCOxz
DEWALT circular saw:
amzn.to/3MCtwsz
DEWALT impact driver & hammer drill:
amzn.to/49SAvbc
Bosche miter saw:
amzn.to/3i8gdVz
DEWALT bit set:
amzn.to/3g7ddHT
Gorilla glue:
amzn.to/34ULnJK
6'' Clamps:
amzn.to/3IARLqM
12" Clamps:
amzn.to/38oDWMZ
Delta Table Saw
amzn.to/3WL7d7s
*Filming Equipment*
www.bearmountainbuilds.com/po...
Disclosure: Links contain affiliates.
As an Amazon Associate I earn from qualifying purchases. When you buy through one of my links I will receive a commission. This is at no cost to you.
Thank you for supporting Bear Mountain Builds and allowing us to continue to bring you valuable content.
*Bear Mountain Builds Things*
Instagram: / bearmountainbuilds
Facebook: / bear-mountai. .
Bear Mountain Builds (Free Plans): www.bearmountainbuilds.com/
Patreon: patreon.com/BearMountainBuilds

Пікірлер: 159

@MichShopRat 10 ай бұрын

Thank you for offering free downloadable plans. It is very generous of you and I, for one, greatly appreciate it!

@VitalPolymath 15 сағат бұрын

Not free anymore

@user-kl2oy2bb6b 8 күн бұрын

Looks great .

@andyboy148 Жыл бұрын

Didn't know Mark summers was into woodworking lol. Great build

@milleradam98 Жыл бұрын

😂😂😂😂

@brianeatock4383 Жыл бұрын

Waiting on him to be slimed.

@yaowsers77 Жыл бұрын

Yes! I couldn't place him...

@mikealmeida6074 6 ай бұрын

Planter looks great! Would you consider making a video on how to properly use a hand router? I always have trouble getting it set up correctly.

@jeffforbes3772 Жыл бұрын

Pretty cool! Thanks for posting.

@danielhanawalt4998 Ай бұрын

Well made video. I like the two tone planer.

@DrewLarsenDesigns Жыл бұрын

This is an awesome build and super simple! Love it!

@stephenmoore2561 Жыл бұрын

Nice build!

@aureliymovila4777 Жыл бұрын

Thanks for sharing ❤

@eeodle Жыл бұрын

Nice job 👏

@garytanner3156 Жыл бұрын

Well done!

@jimrosson6702 Жыл бұрын

Great idea

@johnnyowen9024 Жыл бұрын

Excellent job I'm going to try this!!

@LaserLife67 Жыл бұрын

Cool planter box. Thanks for the video and the plans.

@alonzohollingsworth7712 Жыл бұрын

Simple, easy and good looking. Thank you so much👍👍👍.

@aubreyjohanson6979 Жыл бұрын

You do a great job

@dennydietrich3596 Жыл бұрын

Liked that planter design

@monkeyman8265 3 ай бұрын

Thank you so much for the plans. Subscribed.

@garysobczak9931 Жыл бұрын

Great job and project... keep up the awesome work!!!

@mariovasquez6954 Жыл бұрын

Beautiful I know these will do well at craft shows, thanks for sharing !!

@dospalmascb Жыл бұрын

Looking forward to building this. Thank you for a great video and plans.. just ordered wood to build my bench using your plans. :)

@ibulgaria7768 4 ай бұрын

great work boss !

@glennprovenzano1837 Жыл бұрын

Nice job

@user-if5bx3pq4d 3 ай бұрын

Great work. Great planter. Lovable planter. Just to add a fact, the function of this planter is not meant for draining water from the top box. You would need a protective plastic to help catch and avoid spillage. You do not want dirty water dripping on that beautiful base. I like your neat build.

@markfields9841 Жыл бұрын

Plastic drinking straws also work great for cleaning up glue squeeze out in corners. When the end of the straw gets full of glue, just snip if off with scissors.

@BP-rh8tl Жыл бұрын

Do those even exist anymore? Hahaha I kid I kid

@luckydadof5 Жыл бұрын

Man Thanks for this pattern... I made one... posted it for sale... Got such a response That I started taking orders and in 24 hours I had 30 orders... Pulled the Ad so I could catch up! At $50 each I may have posted to cheap. Thanks again.

@BearMountainBuilds Жыл бұрын

That’s awesome!

@RogerD-hx5sd 3 ай бұрын

$50!? That's way to low. I will make from Cedar (better for environment) and sell for $350... Or more!

@djmj17 3 ай бұрын

@@RogerD-hx5sdthat's a stretch 😂

@mrbeastchocolate Ай бұрын

@@RogerD-hx5sd Doesn't sound realistic

@steven_vogt Жыл бұрын

Thank you for this 👍 very nice design

@bobdaly-rl9xd 3 ай бұрын

thats pretty neat like it alot gonna make a couple

@Itmovesme1 Жыл бұрын

nice build..

@rebeccaboyette866 11 ай бұрын

Thanks so much for what you do. I am a beginner and so appreciate the free plans! You will always have my support!!

@larrystone5749 Жыл бұрын

Great job and build thx for the tips and sharing enjoyed it Be safe God Bless

@fabfafa 3 ай бұрын

Thank you from France 🇫🇷 I made 4 off them 👍👍👍👍

@lakeville1853 8 ай бұрын

Just found your channel Loving it I downloaded the free plans Thank you

@niccolealdrich4890 11 ай бұрын

Very nice! I can envision a few variations 😊

@ctpopham Жыл бұрын

Awesome build. Keep up the great work. Going to make this as a surprise for my wife. Thanks

@Richism4U Ай бұрын

thank you for plans. new sub appreciate all you do

@lindaflanagan8814 6 ай бұрын

Very nice. I’ve downloaded the plans to make some of these 😊 love your work

@irvincasely-hayford7743 10 ай бұрын

This build looks SO easy, and the finished product looks AMAZING! I will be trying this one as soon as I can carve out some time! Thanks for the plans! Oh, I’ll be watching the rest of your videos for sure!!!!

@gaynorreynolds907 Ай бұрын

Thank you

@bearsstuff Жыл бұрын

Definitely interested in these plans!

@BearMountainBuilds Жыл бұрын

The plans are now out!

@101mazz Жыл бұрын

@@BearMountainBuilds How did you fix the nail breakout at 2:22?

@AntonioGarcia-cs9dw Жыл бұрын

Really glad to have found your channel on KZfaq. I hope to use some of your ideas and plans to make a little extra cash this summer. I'll let you know. Also I'll be going through all your videos and hitting the like button. Although I haven't been able to watch them all yet, I hope it helps. Stay blessed young man.

@joshuabray37 Жыл бұрын

Thanks for this! My wife and kids keep getting flowers and seeds from various places. We end up having all these little small pots (like 4 and 8oz pots) everywhere. This will be a MUCH better way to organize these and they will look much nicer.

@rhondawalker6732 10 ай бұрын

Nice. simpler way than on DIY Creators Channel. But both look good.

@RichyN25 Жыл бұрын

Cool build! Subscribed and thanks for the free plans! I'll definitely have a look at them and try some out for practice! I really need a miter table for my miter saw so that'll probably be the first thing I make out of your plans! I don't have a brad nailer yet, but it's on my list of things to get

@GregChu-uv7kh Жыл бұрын

Cool bruh. Aka loser

@themeat5053 Жыл бұрын

Nice job! Simple, effective You can't be a real KZfaq "creator," you're not 100lbs overweight. Stay tight and keep up the nice work (from an old woodworker and broken down jock).

@nazariatorres8698 Жыл бұрын

Mesmo lindo

@sushiiworld1829 Жыл бұрын

I love your videos. Literally watched them all over the week. I been wanting to get into wood working for a long time now. When I start building your design for my family and friends will give you all the credit and send them to your channel. Much love.

@BearMountainBuilds Жыл бұрын

I really appreciate it!

@GregChu-uv7kh Жыл бұрын

Lol. What a loser

@TxMasterOfNone Жыл бұрын

Try using a plastic drinking straw to clean up along the inside edges and corners and wipe the excess with a wet paper towel. Works pretty well.

@grandaygain 11 ай бұрын

Thanks!

@BearMountainBuilds 11 ай бұрын

Thanks I really appreciate it!!

@BeauSeverson Жыл бұрын

Weird compliment, but thank you for listing the gauge and length of the brad nails used. Seems like a small thing but when I look over what sizes and how many I have it's nice to know at a glance if I need to go run and top-up on a certain length.

@jonw6376 Жыл бұрын

Nice planter! After downloading the plans & attempting to open them, I see your notations about the "Coming Soon." I'll probably just come up with dimensions. Thanx again so much!!

@BearMountainBuilds Жыл бұрын

The plans are out now!

@jonw6376 Жыл бұрын

@@BearMountainBuilds Thanx SO much, Zach!

@tacomonkey222 2 ай бұрын

@@BearMountainBuildshave you seen this video? It’s the same planter box kzfaq.info/get/bejne/bOCogtOcl9echJs.htmlsi=J-DbOc73YOCGqibC

@rubberducky1902 Жыл бұрын

You asked for locations - joinery tutor based in N. Ireland Big thanks for cool craft ideas for the students 👌

@RogerD-hx5sd 3 ай бұрын

Always enjoy your builds. What length roofing screws were used here? For a 5/4 board, do they sell 1-1/4 roofing screws? Or are these strictly decorative.

@bryanmartin8336 8 ай бұрын

Big fan of your channel since discovering your workbench build. I feel like the laminated fence pickets for the bottom shelf are too noticable at the end grain though. Debating between adding bottom stretchers to cover those up or just using more cedar decking cut to 2x2 dimensions like you did for the legs. Guessing the latter would mean buying another board though.

@zackjames88 11 ай бұрын

Great video....only thing is should use tight bond III for outdoor use.... designed for it

@BearMountainBuilds 11 ай бұрын

Titebond 2 is water resistant and would work well, but if you want to take it the next step yes 3 would be the best of the best

@davegravel3740 Жыл бұрын

This could easily be adapted to hold a grow light for starting seeds indoors and taken outside for hardening plants to plant outside after frost danger is past. Also would work great for an indoor herb garden for fresh herbs year round. I'm gonna need two or three of these. Curious why you didn't use half laps on the legs since the bottom shelf is half lap joints.

@BearMountainBuilds Жыл бұрын

I didn’t want the black supports to be seen on the ends

@milleradam98 Жыл бұрын

Awesome love it! I built a different style planter last year, I used spar urethane for outdoor furniture. My wife wants another one, I like this design except she wants the planter box portion painted turquoise... Not a problem but I think oil based spar urethane over the paint will dull/change the color, any suggestions for a protective coating over the paint? Also looking forward to seeing your new shop completed, lol I'm not a hater but definitely jealous 😂😂

@BearMountainBuilds Жыл бұрын

If you use crystal clear water based poly it shouldn’t impact the color too much. I’m very much ready to get into the new shop but the Minnesota winter really slowed me down since I still have to finish putting in the insulation. I should be moving in this spring and finishing sealing it up this summer

@syedimranaliali9198 Жыл бұрын

Very nice video. I love the free plans u provided with the videos. So many videos say free plans but when we go to download the ask for money. Please upload some basic things which every one needs in routine life like tables drawers shelfs no one gives plans for this simple projects. LOVE FROM INDIA ❤

@BearMountainBuilds Жыл бұрын

The plans are $0

@jamiejohnson9520 Жыл бұрын

This looks easy as long as you have all the tools. That stuff is expensive.

@BearMountainBuilds Жыл бұрын

You can build it with other tools that are cheaper but it will take a bit longer

@PrimeAlex35 Жыл бұрын

Hey love the channel/plans. Wondering what I'm missing on the plan where it says the vertical leg are "22 3/4" but page 5 end view shows the legs are 20" tall?

@rickwolfe6254 Жыл бұрын

Awesome , thanks. I enjoyed the video , wondering how hard it would be to change the size ??

@BearMountainBuilds Жыл бұрын

It could be scaled up relatively easily but may want to make the legs thicker so they don’t look too skinny

@jeffreywitty3088 Жыл бұрын

Your very good, think you can best the "Modern Nightstand, By Shades of Blue Interiors"? It's done with only a single plywood sheet, I'd love to see your more talented take on the design. Maybe in 1/4",,,the economy is tight, lol ;)

@misterm7086 Жыл бұрын

No screws or pocket holes at all? 😬 So the brads and glue hold up in the long haul? Great video. Awesome channel. Be well!

@sandman2651 Жыл бұрын

Really good looking design, sadly i would have to make it from pine as cedar is sooooooo costly in the uk

@BearMountainBuilds Жыл бұрын

Pine would still look great!!

@alwayshungry24 Жыл бұрын

subscribed liked an rang the bell in apreciation for video and plans tks

@ckershner74 Жыл бұрын

For the bottom shelf wont the paint on the ends of the support beams cause the glue to not bond the shelf as well to the legs? Wouldn't sanding the paint off of those locations allow for a stronger glue bond and a stronger shelf? Other than that this is a great build i cant wait to get out in the shop and give it a try.

@BearMountainBuilds Жыл бұрын

When I painted the supports for the bottom I tried to not get too much paint on the ends, but you’re right that if you want max strength it would be best to either mask the joints off or sand them before gluing. Either way it’s still plenty strong as is

@ckershner74 Жыл бұрын

@@BearMountainBuilds Thanks. I'm looking forward to getting into my shop and giving the build a try.

@hiitskino9887 Жыл бұрын

this looks very similar to DIY Creators raised planter box.

@jesspher25 Жыл бұрын

Would the brad nails/glue combo hold up long term? or would it be better to add screws as well?

@BearMountainBuilds Жыл бұрын

Screws will always be more durable. I just used Brad nails because it’s simple and fast. I think the Brad nails and glue will last for quite a few years

@peteryelverton2954 Жыл бұрын

With cedar being soft and using cedar fencing, which is a thin piece of wood, you would run the risk of splitting the wood with screws. I would get thicker cedar planks (which is more expensive) if I was going to use screws.

@matthewgarey6240 Ай бұрын

How do you get 8 pieces from the stacked cedar that are 8 1/8 long when the total length is only 23 7/8? I can only get 6 with the last two being 7” long?

@AlexMelara 10 ай бұрын

Are there individual plastic pots used inside of the planter or is just filled with lose soil in the planter?

@BearMountainBuilds 10 ай бұрын

Loose soil

@janetdyer5891 4 ай бұрын

Excellent projects. How do we find the plans?

@BearMountainBuilds 4 ай бұрын

I have a link to my plans in the video description

@Canosa612 Жыл бұрын

What is Pressure treated Cedar tone wood? Is that something that can be bought at Home Depot or Lowes or is it just plain old pressure treated planks treated with cedar tone stain? I want to make some of these planters but I'm very confused about the "pressure treated cedar tone" wood.

@BearMountainBuilds Жыл бұрын

It’s a board that is generally used for decking that can be bought at Home Depot or Lowe’s. I bought mine from Home Depot. It’s pressure treated so it can’t rot and the cedar tone means it’s artificially colored like cedar

@cristian13ytube Жыл бұрын

Does the glue stick to the paint?

@BearMountainBuilds Жыл бұрын

Yeah it does. However if you want to make it as strong as possible you would want to mask the areas where it will be glued before painting. However, as is it is plenty strong enough

@DennisMathias Жыл бұрын

So, won't the nails rust out? What about dowels.

@BearMountainBuilds Жыл бұрын

I stuck with Brad nails because I wanted to keep the build really simple for beginners to woodworking. I decided that dowels might be a bit to advanced for a first project

@artsteadman2230 Жыл бұрын

For the negative Nellie's... KISS

@milleradam98 Жыл бұрын

I agree, I'm not a beginner but this project and others like it helps everyone. A beginner has a step by step guide, someone experienced can adjust to their taste accordingly. It's getting harder to find woodworking channels that actually build things that normal people can build without thousands of dollars worth of festool and sawstop products. I applaud this guy and appreciate his work

@elviejo1998 11 ай бұрын

About how much would price this at. I know all depends on the market in my area.

@BearMountainBuilds 11 ай бұрын

At least $40 but it depends on what your time is worth

@markfields9841 Жыл бұрын

Unless this is designed to be an indoor project, you need to be using Titebond 3 wood glue which is waterproof.

@BearMountainBuilds Жыл бұрын

Based off the Titebond 2 spec it is water resistant and suitable for outdoor use

@knowsnugget3321 Жыл бұрын

MUSIC GAVE ME A HEADACHE BUT THE BUILD WAS AWESOME

@thomasmccarthy6259 3 ай бұрын

I'm struggling to get the tools to start my own woodworking business. I feel like it always just out of my reach.

@BearMountainBuilds 3 ай бұрын

Just got to start somewhere and as you make more money you can buy more tools

@alexreid4131 2 ай бұрын

Nice work. Buts that’s not Titebond II sir.

@BearMountainBuilds 2 ай бұрын

It's an old Titebond 1 bottle filled with Titebond 2 glue. I ended up buying a new small bottle on Titebond 2 to avoid confusion in future videos

@alexreid4131 2 ай бұрын

@@BearMountainBuilds oh ha ha. Fooled me for sure. Love the build 👍

@fidgetshouse Жыл бұрын

You should charge for the plans, they are really great. So I am going to pay you for them. You also have a typo on your shop page (bought not brought)! ;) great channel.

@BearMountainBuilds Жыл бұрын

Thanks Kris I really appreciate it!!

@thecentralscrutinizerr Жыл бұрын

I wonder how much you can sell these for.

@BearMountainBuilds Жыл бұрын

Depends on the area

@thecentralscrutinizerr Жыл бұрын

@@BearMountainBuilds Myrtle Beach, SC.

@sahibsidhu5835 11 ай бұрын

Where can i get the plans ?

@BearMountainBuilds 11 ай бұрын

They are linked in the video description

@jeffmay1024 Жыл бұрын

How do I download the plans?

@BearMountainBuilds Жыл бұрын

There’s a link to the plans in the video description

@scottshanklin9174 Жыл бұрын

I downloaded the plans but they would not open please help thank you

@BearMountainBuilds Жыл бұрын

Are you still having issues?

@scottshanklin9174 Жыл бұрын

@@BearMountainBuilds nope thanks keep up the good video

@izzylevy49 5 ай бұрын

Hi can we have the measurements ?

@BearMountainBuilds 5 ай бұрын

I have all the dimensions in my plans linked in the description

@denvernow7294 Жыл бұрын

I hate it when I lack in appendages... 🤔

@tomquinn9240 11 ай бұрын

I guess I didnt get the dimensions????

@BearMountainBuilds 11 ай бұрын

All the dimensions are in the plans

@ignatiusreilly8280 10 ай бұрын

lol ok.

@Kilroy72 Жыл бұрын

You should be using Titebond 3 which is waterproof.

@BearMountainBuilds Жыл бұрын

Based off the Titebond 2 spec it is suitable for outdoor use and water resistant

@greenhornadventure Жыл бұрын

@@BearMountainBuilds TB2 is water resistant, TB3 is water proof. Well worth the extra few dollars on something like this. Love the design BTW.

@intrusivenature9758 6 ай бұрын

Glue on painted surfaces and only brad nails. 12 months time it would have fallen apart.

@robertwoods8762 2 ай бұрын

should use titebond 3 and not 2. Also, you are using titebond original in the video.

@BearMountainBuilds 2 ай бұрын

It's an old Titebond 1 bottle filled with Titebond 2 glue. I ended up buying a new small bottle on Titebond 2 to avoid confusion in future videos

@CobraR99 Жыл бұрын

Glue is not waterproof

@BearMountainBuilds Жыл бұрын

This glue is water resistant and Titebond 3 is water proof

@CobraR99 Жыл бұрын

@@BearMountainBuilds but u used Titebond original in the video witch is not waterproof

@billmactiernan6304 Жыл бұрын

The glue you are using is not suitable for an exterior project. You should be using a waterproof glue like Titebond III

@BearMountainBuilds Жыл бұрын

It is water resistant glue and based off the supplier spec okay for exterior use

@billmactiernan6304 Жыл бұрын

@@BearMountainBuilds I am looking at my bottle of Titebond Original Wood Glue, which exactly matches the bottle you are holding in frame 1.23. The label specifically says " Not recommended for exterior use or where moisture is likely." Further, in even bigger font, the label says "For exterior projects, use Titebond II or Titebond III."

@scundoorsup5342 9 ай бұрын

No one can afford cedar anymore , geez

@BearMountainBuilds 9 ай бұрын

They’re about $3.50 a plank at Home Depot near me

@georgelucas6550 Жыл бұрын

Didn't watch the whole Video, why, he says he is using Tite Bond II, when he is using the original, which has NO Business being in an outdoor project

@BearMountainBuilds Жыл бұрын

It’s an old bottle of Titebond 1 I refill it using a big jug of Titebond 2

@nerd23x Жыл бұрын

I am sorry, is he single bc he's smoking hot!!!!

@Indopridechicken 7 ай бұрын

Iloveyou

@ericsteff6266 Жыл бұрын

Hey hey, I appreciate you brotha!Thank you for the plans!! You don’t have a patreon (ok I don’t need to spell for this) I already subscribe, but how can we buy you a coffee or something? Like I said I appreciate the free plans and already subscribe. I’d like you to keep doing your videos and free plans. So how can we donate a little cash so you will keep making such great content? If everyone that downloaded the free plans donated $5,10,20 bucks, you’d have a little side capital to make even cooler videos and more free plans. I say free plans because not everyone has the extra cash to donate every time but at some point when they do have an extra few bucks they can pay it forward then! I know TMI! I can’t help it! Done… oh wait but… nope done.JK Dang I was going to be done but I haven’t been to your website in a while so I checked… you’ve added a lot more freebies!!! Hope you’ll setup a donation option! Makes me feel weird to keep taking the plans without donating something. I can’t be the only one that thinks you should. You’re not begging for money, you’d just be giving the option for people that want to send a little something something! Thank you for your consideration! Done for real E E

@BearMountainBuilds Жыл бұрын

Thanks man I really appreciate it. So far I don’t really have much set up. Maybe someday I’ll have a Patreon. Some people have somehow payed me with a super thanks through KZfaq(I have no idea how they even do it). Maybe some day I’ll sell my plans for $0.99 just to pay for my website because it costs me an annual fee to even keep the store live, but not for awhile yet. But I really do appreciate you wanting to tip for the plans!