How To Solve Chain Tension Issues w/ A Skateboard Wheel Arch Tensioner On Your Motorized Bike

Рет қаралды 7,290

2 жыл бұрын

I'll show you how a skateboard wheel chain tensioner will help solve chain tension issues.
Buy Here:
hughesmotorized.com/arch-styl...

Пікірлер: 44

@christopherarchbautista4570 2 жыл бұрын

I LOVE THIS IDEA SIR thank you from Philippines

@HughesMotorized 2 жыл бұрын

You are very welcome

@diydarkmatter 2 жыл бұрын

looks like a good product brother .

@HughesMotorized 2 жыл бұрын

Thank you

@junkie420play Жыл бұрын

Is thos the best chain tensioner for bike motors? I have the one that came with my 80cc motor and I've had to replace that white plastic roller a dozen times now and have only had my motorized bike for 3months. I have shattered a few, some just crack, some plit in two, but for the most part they don't last.

@reginaldhenderson8948 2 жыл бұрын

How would tighten the roller on the 43cc China friction drive kit?

@volvo850r3 2 жыл бұрын

Is this a better option than the spring loaded tensioner that connects to the sprocket cover?

@HughesMotorized 2 жыл бұрын

I'll say yes. The spring loaded ones will let the chain jam up inside the case sometimes.

@Tom-zv9fl 2 жыл бұрын

The problem with my arch chain tensioner was that it would hit against my spokes, and it was also heavy. I would say it's only really suited for cruiser-style bikes.

@HughesMotorized 2 жыл бұрын

What bike had this issue?

@Tom-zv9fl 2 жыл бұрын

@@HughesMotorized It's an old mountain bike.

@HughesMotorized 2 жыл бұрын

@@Tom-zv9fl Brand name and model?

@trfpvVT 2 жыл бұрын

@@Tom-zv9fl he wants to know so he can improve the product

@Tom-zv9fl 2 жыл бұрын

@@HughesMotorized I actually don't know the make or model of the bike as when I brought the bike second-hand it didn't have any stickers on it.

@shermanateryoutubevlog5817 Жыл бұрын

Please Help I think I found the answer on this Page and i happening on instant impulse I subscribed yes I did ☺️ where can I find this arch thingy?🤔

@HughesMotorized Жыл бұрын

HughesMotorized.com

@JMB676 2 жыл бұрын

That’s a good lookin chain tensioner. If u need a fellow KZfaq motorized Bicyclest to try it out just let me know I would b happy to help 😆

@brynsmith179 2 жыл бұрын

100cc exhaust

@brynsmith179 2 жыл бұрын

How do I get them

@JMB676 2 жыл бұрын

@@brynsmith179 100cc ? Do u mean the yd100 or the steel sleeved 49mm 100cc motors u can buy or dif type 100cc?

@KuuchWizard 2 жыл бұрын

How long does shipping and handling typically take?

@HughesMotorized 2 жыл бұрын

I'll process the order next working day and ship US Postal 3 day Priority so say 3-5 working days

@cwmaxfield2000 2 жыл бұрын

Once you've established the washers. Most hardware stores offer a variety of spacers. Match one to fit. Eliminates the spacing washers. Just a tip.

@HughesMotorized 2 жыл бұрын

Good idea

@charleshilson7908 2 жыл бұрын

Can you use this for a mini bike

@HughesMotorized 2 жыл бұрын

modification would be needed

@LiveYourBestLife33 2 жыл бұрын

Tried the new bolt on engine one with spring😬....chain was not loose or too tight and it got binded up in crank case....which locked my rear wheel up😬🤕...not a fan of them chain meets to close when tensioning it

@HughesMotorized 2 жыл бұрын

Yup. Ive heard lots of that same story

@LiveYourBestLife33 2 жыл бұрын

@@HughesMotorized i was doing 30 mph too😬...my leg took a beating...sticking with the 49cc 4 stroke...as the drive sprocket is totally free from any walls/housing👌...a video on the safest style/'tensioner/ position would be a good video...just saying😊

@asphaltcowboy7868 2 жыл бұрын

The problem with most of these "wheel' tensioner is the fact that these wheels are normally made of a lesser grade material then the metal chain rolling over it a million times..because of this the plastic wheel will eventually wear down..and it doesn't really leave a true track for the chain to run on..I don't think I could trust it with no guide walls to help the chain from slipping off the wheel..or having to readjust it often as the tensioner wheel starts to wear down..if I was to use such product..I would mod it to where it would use a small metal sprocket with teeth instead..

@HughesMotorized 2 жыл бұрын

The chain cuts a groove into the plastic wheel and that helps guide it

@donttread5414 Жыл бұрын

Exactly my problem. My wheel tensioner literally exploded off my bike today, hit my spokes and flew off somewhere in to a field. Had to bike home. Ive been resarching options for better quality wheel so this dont happen again, a metal one would be perfect.

@martianmanhunter7925 2 жыл бұрын

Will this work on a Schwinn OCC stingray ?

@HughesMotorized 2 жыл бұрын

Should. Might need to play w/ hardware some

@martianmanhunter7925 2 жыл бұрын

@@HughesMotorized ok thanks

@tikioz 2 жыл бұрын

Arch Chain Tensioner That's so Batman! Can I have mine in the shape of a bat?

@HughesMotorized 2 жыл бұрын

Joker smile

@brandongill4542 2 жыл бұрын

@@HughesMotorized 🤣

@asphaltcowboy7868 2 жыл бұрын

How about no chain tensioner at all???

@TdMega Жыл бұрын

You're saying put a wrench to that fat hunk of iron bracket and bend it in place.. putting pressure against your frame while trying to bend that iron bracket???

@HughesMotorized Жыл бұрын

The frame is strong enough due to the wheel and other metal sections. Promise. I've built bikes from scratch