Hunter MP Rotator Nozzles Adjustments

Рет қаралды 98,107

Күн бұрын

►Hunter 11'-14' MP Rotator 90°-210°: amzn.to/3Td8STB
►Hunter 11'-14' MP Rotator 210°-270°: amzn.to/48RNBob
►Hunter 11'-14' MP Rotator 360°: amzn.to/49VIO6M
►Hunter 15'-20' MP Rotator 90°-210°: amzn.to/4caZGrA
►Hunter 15'-20' MP Rotator 210°-270°: amzn.to/43mzu9u
►Hunter 15'-20' MP Rotator 360°: amzn.to/3TzLMYS
►Hunter 22'-30' MP Rotator 90°-210°: amzn.to/49G5Eit
►Hunter 22'-30' MP Rotator 210°-270°: amzn.to/48LZgoA
►Hunter 22'-30' MP Rotator 360°: amzn.to/4aep0Lz
►Hunter 31'-35' MP Rotator 90°-210°: amzn.to/3wOv9jc
►Hunter Side Strip MP Rotator: amzn.to/3Pkejij
►Hunter Left Strip MP Rotator: amzn.to/43bcNFb
►Hunter Right Strip MP Rotator: amzn.to/4cc3GrO
►Hunter Corner MP Rotator:amzn.to/3TCEKkX
►Hunter 8'-10' MP Rotator 90°-210°: amzn.to/3VgqMYq
►Hunter 8'-10' MP Rotator 360°: amzn.to/48U6DKS
►Hunter Pro-Spray Spray Body 4-inch: amzn.to/43dDklc
►Hunter Pro-Spray Spray Body 4-inch, 40 PSI regulator: amzn.to/3wTs29F
►Hunter Pro-Spray Spray Body 4-inch, 30 PSI regulator: amzn.to/4c5bag6
Liked our video? Consider supporting us by purchasing Hunter mp rotators through our affiliate links above (we get a small commission), or joining our Patreon: / smartirrigation
Chris from Smartirrigation.com shows the smart way to adjust Hunter MP Rotator Nozzles. These adjustments are the same on all the different varieties of MP Rotator Nozzles. Chris also warns against tempting shortcuts that can cause costly damage to your sprinklers.
Our article showing how to select the correct MP Rotator (of the 19 available) for a particular section of grass can be found here: smartirrigation.com/hunter-mp...
For more smart irrigation tips, subscribe to our youtube channel and visit our official website: www.smartirrigation.com
0:00 Intro
0:21 Different Models
0:53 Meaning of Model Numbers
1:08 Lift up Nozzle
1:15 Parts of the Head
1:29 Tighten Nozzle
1:36 Left Stop
2:02 DONT use these tools
2:18 Right Stop
3:24 Distance
4:27 Conclusion

Пікірлер: 49

@SmartIrrigation1 Жыл бұрын

Liked the video? Help us make more at www.patreon.com/SmartIrrigation

@jadenkitchen8311 Күн бұрын

Fantastic video! Very simple and easy to follow! Thanks for sharing

@mojepokoje_real_estate Жыл бұрын

This is great, your explanation with drawings is the best on YT. Thank you!

@SmartIrrigation1 Жыл бұрын

Thank you very much!

@michaelschwartz9485 Жыл бұрын

Chris, you should make videos about EVERYTHING! Your humor chills me out when messing around with my sprinklers. Another great video, thank you!

@SmartIrrigation1 Жыл бұрын

Thanks Michael! Glad the videos helpful! Haha I wonder what topic I should tackle next then?!

@iixmattyboy3791 4 ай бұрын

First time irrigation installer, couldn’t for the life of me figure out how to get the water flowing the right direction. This video helped BIG time as I didn’t realise you could rotate the pop up section. Thank you!

@SmartIrrigation1 4 ай бұрын

Great to hear!

@robertmclellan3541 16 күн бұрын

Great explaining how to adjust the MP 1000. Thanks so much. Now I am headed out to adjust my nozzles!

@donwheeler1683 11 ай бұрын

Finally after 10 years of occasional use, I'm repairing and upgrading my Hunter spray nozzles, so this video was really helpful for me. Recently purchased quite a variety of underground riser parts and nozzles for the unknown and damage caused by moles and their tunneling along the patios and underground piping. Now I feel comfortable in getting a bit wet knowing how to adjust this efficient irrigation system.

@SmartIrrigation1 11 ай бұрын

Glad to hear the video helped!! Good luck!!

@TherapeuticConnection 6 ай бұрын

Best video on Hunter adjustments by far!!!

@SmartIrrigation1 4 ай бұрын

Wow, thanks for the kind words! Glad you enjoyed it!

@ixus9020 Жыл бұрын

Very good description!

@SmartIrrigation1 Жыл бұрын

Thank you! Cheers!

@juanlemos80 Жыл бұрын

Thank you! Great tutorial!

@SmartIrrigation1 Жыл бұрын

You are most welcome!

@williammiller4786 7 ай бұрын

Good explanation. Thank you!

@SmartIrrigation1 7 ай бұрын

You are welcome! Glad it was helpful!

@qwertyebable Жыл бұрын

Thank you, kind sir.

@SmartIrrigation1 Жыл бұрын

You are most welcome!!

@arvydasbudvytis1080 Жыл бұрын

Chris, very valuable information. Thank you for the story!

@SmartIrrigation1 Жыл бұрын

My pleasure!

@fuidiehockn4599 Жыл бұрын

thanks!

@SmartIrrigation1 Жыл бұрын

You bet!

@romaindappe4139 3 ай бұрын

The last attempt at adjusting wasn't worth getting wet. Now i know ill get wet while actually getting something done. Thanks

@SmartIrrigation1 3 ай бұрын

Haha, thanks and I'm glad you'll now be prepared for the adjustments once the water comes on!

@Robert-gg2vk 22 күн бұрын

Great video. Just one thing. When I was adjusting distance it changed my right stop too I think. Do I need to hold nozzle when adjusting screw for distance? You do in the video but did not mention it so I am not sure whether it is necessary.

@mamihorie926 20 күн бұрын

Thank you for the useful instructions! I have a question for you. When I wanted to decrease the radius by using the orange tool (and tried the flat head screwdriver) it didn’t seem to reduce the radius. When it reaches the maximum of 25% reduction, does the screw stop turning when I turned it to clockwise?

@LOX311 2 ай бұрын

Thanks Sir

@SmartIrrigation1 Ай бұрын

You are certainly most welcome sir!

@mojepokoje_real_estate Жыл бұрын

Have a question, when setting a left stop position, can I turn/operate with MP rotator both sides?

@SmartIrrigation1 Жыл бұрын

Yes, when setting the left stop, you can turn the riser/stem in either direction until the left stop us where you want it. Then you can use the dial silver ring to adjust the right stop

@marcusl594 Ай бұрын

What are the color tops indicating on the sprinkler heads? Is it just psi flow allowed and art ankle?

@SmartIrrigation1 Ай бұрын

Each color on the top shows the radius (distance) the spray is designed to shoot. You can check out our article on spray nozzle selection on smartirrigation.com for a run down of the different colors and distances

@ryanhulsey3460 Ай бұрын

The contractor that built my house just used the regular black spray bodies for the MP rotators instead of the one with the gray head for 40 PSI. What is the PSI for this head? Will changing to the right body make my stream spray further?

@SmartIrrigation1 Ай бұрын

The regular black heads aren't pressure regulated, so the pressure is just what your system happens to have (many many factors affect this). With the black being unregulated, that would mean if your system had 50+ psi, your rotators might actually spray further with the black head rather than the grey head. Changing to a 40PRS head will reduce the distance if your system has pressure over 40 psi, or won't change the pressure if your system already is running at or below 40 psi. Hopefully that helps

@alessiotius283 11 ай бұрын

Hi I have both the MP rotator 3000 and MP 2000, but I notice that the radius of the MP 2000 is not up to spec. I use them at 3 Bar and they should do 6.1 meters but they don't even reach 5 meters I don't have this problem with the 3000 series. I don't understand what it could be?

@SmartIrrigation1 11 ай бұрын

Hmmmm that's strange. It could be that the 2000s are turned down with the adjustment screw at the top. Also, you could build a guage system to measure dynamic pressure (pressure with flow coming out of rotators) at the spray head to make sure the pressure there is 40 psi. Otherwise, there might be more complicated trouble shooting needed. Check out our patreon if you are interested in supporting us and more in depth levels of help! www.patreon.com/SmartIrrigation

@alessiotius283 11 ай бұрын

@@SmartIrrigation1 Thanks for the reply. I already did the tests and I'm at almost 50 psi. The only thing that comes to my mind is that having put them in a line of 4 sprinklers I wouldn't want the pump inverter to struggle to keep the pressure constant for a small flow rate (about 13 litres/minute) in fact the motor modulates a lot .

@SmartIrrigation1 11 ай бұрын

Since the 3000s use a lot more water than the 2000s, if the 3000s work at specd distances it is likely an issue with the 200p heads themselves

@ZekeMagnum 10 ай бұрын

How many mp3000 210-270 do you think i can run with 74 PSI? 3 maybe 4?

@SmartIrrigation1 10 ай бұрын

How many will mostly be based on how much flow you can support at 40 dynamic psi. On a 3/4 line, I'd say probably 3-4 but hard to know without being there