My first great Chainsaw.I have today a Hecht chainsaw 45 2,7 HP with 40 CM Barr

them lil' guys are fun ,,, sometimes

I bought a Husky 45 Special about 30 years ago and its still going strong. I love it!

I just tore my Grandpa’s old Husky 44 down last week. 37 years old and still tares through the wood!

Seems like a solid saw, I've always liked those older husqvarnas

That 44 is in a good shape! Im being pulled towards the small saws lately. Got a 133sg to play around with from 1980. Was sold as not starting. I messed around with it a bit and it fired up enough to see it has great throttle response. Those small high revving saws cant be underestimated.

The 44 was the saw my dad taught me on. Saw was a great runner till it had a melt down one day, sure miss that saw.

Fun video! Those tiny saws definitely shine for some work. So light and easy to climb around the brush piles with. My go-to brush-pile saw is a Stihl 170 with a ported 180 top end (32cc). I've never run one of the little Husqvarna's. That 44 looks like a dandy.

I owned a 44 around 30 years ago I cut lots of firewood with it l had a 18 inch bar on it amazing how well it handled it.

I love my 550 XP Mark II for that kind of work.The 44 is a sweet little saw.

Those are good little saws. I love the old stihl 024 personally for that kind of cutting.

I had a Remington saw close to same cc I think it was a 45cc. I gave it to my dad still in the box. I rebuilt a stihl 270 a 50cc I have T got it to run right yet. But the saw I been running is a joncutter 5800 I believe its a 54cc. I put a .325 chain with 18" bar on it. It's runs good! Light weight and fairly strong if you don't bog it down. Tha ks tinman for the vid. Enjoy it!

My first saw was a used 40 Husky, I loved it!!!

I just bought a 44 rancher white top can't wait to try her out!

My first saw was identical to that. Still have it. Little bugger rips!!

Those trees all lined up perfectly in rows is kind of freaky.

Thats a very nice example of a 44 I have a white top 61 that still gets ran for logging and firewood its just a joy to run got the 61 white top a 266se and an echo cs 590 timber wolf im running I have a 272 that I have to rebuild the top end on but thats a project for a later date

Solid little saw there Tinman! You have given me yet another saw to start looking at. I never knew watching KZfaq could be bad for my wallet! Have a good one!

346xp is my favorite. I guess it might be hard having a favorite that I don't own. Nice saw, Tinman!

The chainsaw that I grew up with, was a husky 242 XP. They are true workhorses and reliable, and well used by the swedish army.

It’s good to see a 35 year old saw doing a good job.

My 45 Special was the first saw I bough brand new. Yep, sounds identical... Great little saws, used to cut way bigger than I should have with it - wish I'd known then how to sharpen the chain properly, that size chain needs all the help it can get.

I've got a little husky 340 that's ported and muffler modded, it freakin screams, and I've never had a single problem out of it, I absolutely love it. someone would have to pry it from my cold dead hands lol.

Hi Tinman, I have one of the very early 44's from the seventies and it is a crazy little thing. The chain speed is awesome fast for its size.

My Stihl 025 is my go to saw for the small stuff. I totally love the little bugger!!

My smallest is my 170 but I love using my 2150 cuz it's the perfect weight I don't always like lugging around a 461 or 661 even my 039 is getting heavy in my old age and I really old age got a bad back and a bad rotary cup thanks for the video brother

love those older huskies small powerfull and light

Sweet saw!

I have 2, but the older versions (metal bar in the front, not plastic). My granddad and great granddad bought them new in the 80s. They are great saws

Hi Tinman, I bought a second hand 242xp at least 10yrs ago and she's always been a good saw and my only saw until recently when I bought my second hand 576xp. I still think I need more saws though ha ha.

Dang! You got all the cool saws!

good saw i got the old 36 good in the small stuff

Nice little saw. Some of the Poulan 30-40 cc range saws are little rippers as well.

I have a 488 shindiawa...its best little saw ive owned in 26 years..its done 100 cord and countless removals last year its what got me into wrenching on them and your channel????mostly yours..it has bad filter set up gets fines in it sp been cleaning ot every night ..just did take it apart and its huming..has light scoreinh on intake side ..from that filter..didnt want to use it on fire wood but parts are super cheap..not quite there yet as far as doing the cylinder and piston myself yet??but think i can i orderd a better filter setup online...and need the cover knob...its one peice so just rigged it to seal..as i have to take it off to clean daily...love that little saw got it for small side job and it hasnet quit since..taken down huge 4 foot round trees with it..not so good on hard woods and that tensioner i have to watch it will slip or self tighten?but great saw you got there freind..

It is a very good saw ! Agree ! :-) Swedish top product.

I USE TO HAVE A 444 husqvarna probably from late 70s early 80s ran very well ,ended up giving it to my friend that is a trapper

Reminds me of my dad's Sachs Dolmar 114 and Poulan Counter-Vibe 3300.

I like the older huskys because the desighn and there easy to acsess..those sthils are new to me as far as takeinh all apart..have 029 needs rebuild..i have all the parts except new piston and cylinder ..ibstriiped it down and labeled them..

Bet one of them would be fun to port prolly have some mad gains too for me smalls saws seem to gain the most when ported

NICE LITTLE SAW RUNS VRERY WELL GREAT JOB BUDDY BE SAFE TINMAN

I have one just like it and it's little beast.

Just got a 36 that’s perfect, except for a hole in the oil tank right under the muffler. I’m gonna find a blowed up one for the good case, cuz the motor has amazing compression an runs perfect.

NICE RUNNING LITTLE SAW

My favorite small saw is SOLO 636. (because that's the saw I own ;)

Husky 44; It ''look'' little but can do a lot of job, like my Homelite XL-1 AO (41cc) from 1980 with 16'' bar (full chisel, round filing). My other ''little'' saw is a Jonsered 52e with a 20'' bar (full chisel, square filing) and size wise/power she is my favorite one.

Still would like to see ya do up one of those 550xp that you have shelved. You may have a new favourite small saw!

Nice looking section of land be great for little food plot and deer blind lol

Looks like good fireplace wood to me.

Nice. I Allwas wants Hasqa50 rancher.maybe one day I’ll find one

I think the smallest I’ve got of that era is a 50, I’ll have to check for ya!👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

perfeckt saw for smaller wood

I have a 242xpg from 1990 with a modded muffler, basegasket delete, retarded timing and mild porting. It runns really good. Lift and strong.

Waiting on crank seals for mine. Hopefully it rips

boss had one, 5 years of off and on use, fuel, oils, file is all she took, 80' euc with 12' base had to be removed for hay barn, the feller switched it out for his, a busted muffler bolt gave his away the next morning, he brought it back after a week on his next job, tough saws

Tinman love your channel. I'd love to see a video in the future of how the tinman sharpens his chains. I think it would be great for the channel.

I just got rid of my 36 last year and I am sorry I did. Onto better saws though.

Nice 🙂

There needs to be some sort of saw gtg in our area. I have a shelf full of saws that you would probably like to get a chance at trying out. I have been concentrating on getting my 133 chassis saws all tip top, haven't gotten to my 340 or 444 yet. On the 133 side, I quite literally have them all, 133, 234, 238, 42, 242 and 246... Lots of others too.. I really need to start making actual content on here. Been doing Tik-Tok lately, so I'm starting to get past my aversion to video editing....

Nice saw tm. Got a 41 I would like to like, but, I don’t like it right now. Carb kit, line, filter and int gasket. Just won’t straighten up. Piston/comp both good. 😩

So tapped a extra screw whole and use tape to seem it while in use so not worried about fines as much

Only trouble with the 44 is there's absolutely no after market support. I own a white top 44 great little saw just no parts availability for them.

Nice saw Tin Man! I have a 4:35 that's my main go to for around the house and just buckin smaller logs! Would love to get it ported!. I know I asked this in another comment but do you have any connections in the Connecticut area? And what should that roughly run me? I don't know much about pricing and don't want to get ripped off

I just acquired one. Would love ❤️ to have it ported. Let me know. Thanks

Tinman did you ever find a 44? If not I might have a line on one. It looks to be in rougher shape but should be perfect for a daily user build.

Ya I fixed up my pops special 45 and got to run if for a bit and they rip.

First saw I ever used, my dad said it was designed as a pro saw for limbing pines. Angry little suckers, just keep your knuckles away from the screw that holds the top cover on when it's been run hard (it burns).

Try a 13" bar on a 45cc class saw. I run one with a 8-325 sprocket, narrow driver on a 346xpg. It'll blow your mind.

1986 i was at walter paytons last home game SOILDER FEILD LOL LOL

I've always wanted one of those or a 444. You don't see either of them often.

I got this one cause ots light 10.2 and about like that one only thinner bodystyle

Hey Tinman I want to port this homelite 3514c as my first port job can I get your thoughts or recommendations ? That little thing huskey has me motivated. To mess with this little 35. 💪🏻⚡️🪓 Kindness and love

Do you know where I can get a carb for a P51 Pioneer saw? I live in SW Wisconsin.

She brightened up once you took the screw driver to er. Sounds like she could go for a muffler mod? I think there is a lot to be said for a small light saw for just the situation you're in here. This is an interesting area you are in. The arrangement of trees looks very deliberate. You in an orchard?

Man your big dude.lol

Did you ever find one of those for yourself?

Hi do you have an extra oil cap for a 44. I’m in Comox

How often do you get your bar pinched, Tinman?

Was useing in the tree but the cover set up..is kinda chezzy and brakes

My mate has his dad's old 66 its in mint condition

Try a 346xp I have one I have owned for about 25 years not for sale!!!!!

Hey Tinman what chain is that.....

This video just made me dig my dad's 44 out. It's all there but needs a piston and cylinder. Anyone know if they are still available?

It looks like you’re holding a toy when you use small saws!

Are those trees in lines like windbreaks

She cutts

Is your mic making noise or something loose on chain assembly

I have a 55 that was my first saw can u port it for me

Stout lil saw what is ur opinion on the 55 rancher I believe it is my buddy has?

lol im trying to get spark plug for one

A dogs breakfast lol

Talking little saws...to clearify

Rite on

How do i get ahold of u

Have zero doolars in it..lol

254 is better