Best review I’ve seen of a 460 thanks bro I’m getting one

Loving the videos mate. All the way from Australia. Keep up the good work

If you are comparing our information with the Husqvarna.com/460 product page I understand what you are saying. Husqvarna has a typo on their web page. If you are on their page under the 460 product be sure to click on "part numbers and pricing" it shows you it is 24in bar and chain capable. Often times there are many misprints on web pages and brochures. If you have any other questions let us know. 24in is the max spec for this saw.

I noticed a huge difference with the 24" bar vs the 20" bar. The cut is a lot slower. I know people buy it for the 24" bar but it lacks the torque when cutting and requires a little more patience. I love my 460 and the 24" helps with larger logs. I have the 450 and the torque difference is very noticeable. I am not saying the 460 is bad just have to know the limitations of the machine you are using.

the 24" bar is a bit beyond my new 460 on a 14" log, will have to drop to 20". running hot on max bar is sacrificing life for length

i want to see a review on the 465 Rancher

What is the decompression button supposed to do? I press this and it doesn't depress?

wish you had dont a tear down as all my life i have had this brand of saw and no other, and cut thousands of cords of wood truble free, in fact i have a 25 year old saw still running strong after over 150 cord of wood and truck loads of fire wood, but in 2013 i bought this saw and it sat in the box for 3 years never put gas in it, the date of mfg says 2010, not even 2 years ago i took it out and ran there pre mix gas for brake in, well 2 hour into use, not in one day, just cutting some brush on my fence line in short spirits as you have to move the brush, each day may have used it for 10 to 20 min, then one day i was cutting up some birch saw mill slabs for fire wood and 20 min, into it the saw stopped dead, never to start again, this saw has tops 2 to 3 hours on it, using there pre mix gas;; compression feels dead, i took it to the dealer, they would not warranty it, as it was past the time, i had to pay them $160 cnd to have a look at it,, i dont think they did any more then i did, a compression check, told me it is not worth rebuilding it as it is a throw away saw, what never heard in all the years of them making throw away saws, was always able to fix my self ot take to the shop and 100 bucks later back in the woods, i asked them what was wrong, all they would say is no compression, well i knew that before o brought it to you, what blow on it, they said we dont know we didnt get into it, so i paid them $160 to tell me what i already knew,, way to go, so i ask you how do i get the jug off as it do not have the 4 head.jug bolts like any other one i have had, i am sure i can rebuild it cheap if i can get parts and find out how it comes a part,, i have a 2 part video on here on this

How does the compression valve on the top work manual says to take it off if it's cold but it feels like a button I can pull it up and push it down what should I keep it at up or down or do I leave up for start up and push down manual wasn't very clear thanks

Will the 460 top end line up to the 455?

Where can i get this machine here in saudia arabia

Traducir a español