Husqvarna K760 Diagnosis, Service & Repair

Рет қаралды 4,586

Күн бұрын

I perform a regular service on the Husqvarna K760 gas concrete saw, replace the ignition coil, inspect the intake and carburetor, and replace the drive pulley/retarder. I have included part numbers and schematics / parts diagrams for the work performed.
0:00 Intro
1:20 Removing the Engine Covers
3:15 Removing the Belt Covers and Bar
6:35 Removing the Pull Start
8:12 Coil Replacement
13:55 Amazon Service Kit
14:40 Particle Screen & Air Filter Replacement
17:13 Fuel Filter Replacement & Tank Cleaning
21:14 Lubricating the Pull Start
23:38 Test Run - Not Right
24:23 Intake / Carburetor Removal & Check
29:38 Carburetor and Intake Hose Parts
30:56 Intake / Carburetor Installation
35:20 Compression Release Replacement
36:34 Engine Covers and Pull Start Installation
38:54 Test Run - Good
40:03 Drive Pulley Retarder Replacement
46:43 Blade Guard and Bar Reassembly
52:08 Outro
#husqvarna , #husqvarnak760, #concretesaw

Пікірлер: 9

@robtalbot4594 10 ай бұрын

Excellent video! I have a K770 which is basically the same as the K760 so needless to say this video was extremely helpful. Thanks for taking the time to make it!

@ozarksethic 10 ай бұрын

You're welcome. I'm glad you found it useful and thanks for watching.

@PineyWoodsHomestead Жыл бұрын

I've always been better at taking stuff apart rather than putting it back together again. Those saws live a hard life. Great job refurbing that saw. Impressive!

@ozarksethic Жыл бұрын

Thanks, Matthew. I've got more time than money so I have to put it back together so I can use it. LOL! They do live hard lives, especially this one since I got it from a rental house. It was so cheap that I couldn't pass it up and this is the first time I've had issues with it since buying it.

@PineyWoodsHomestead Жыл бұрын

@@ozarksethic same here...more time than money lol. I used to run one cutting into catchment basins on new drainage construction. Talk about dusty jobs.

@rickc4317 Жыл бұрын

Once again, excellent tutorial and example of patience that I wish I had more of. Is it still running fine? What was your bottom line thinking that the issue was? Fuel filter stopped up with rust?

@ozarksethic Жыл бұрын

Thanks, Rick. I thought it was the coil but the trash in the tank made me suspect carb issues. Flushing the tank and running it a little with the new coil straightened out the stuttering. It's working fine now. I think there was a compounding problem with the coil, filter, and trash in the tank. The drive pulley problem came down to a broken spring and missing center retaining bolt. That is working fine now too.

@user-uq5bq7ud6t 6 ай бұрын

Hallå! Och var köpte du reservdelar till k770? Kan jag få en länk till produkten?)

@ozarksethic 6 ай бұрын

Delene jeg brukte kom fra Amazon. Jeg søkte nettopp etter Husqvarna K760 deler. Så langt har de vært fine og jeg har ikke angret på at jeg kjøpte deler som ikke er OEM. Takk for at du så på!