HVAC Ductwork BEST Practices Using SHURTAPE | Part 2
Рет қаралды 122,549
3 жыл бұрынContinuing the HVAC ductwork fabrication series, here is part 2! I’ll show you my process on how I insulate the metal duct, secure and seal the branch line taps. I find this process to be pretty easy and effective. Using the right tapes is crucial in sealing the ducts properly, that’s why I use Shurtape. Quality products that I can trust. Hope you guys enjoy the video!
-SUPPORT THE CHANNEL-
www.patreon.com/qualityhvacr?...
-HVAC TACTICAL-
hvactactical.com/ (Use Promo Code "QUALITYHVAC" to save 10%!)
-FOLLOW ME-
Instagram: @qualityhvacr
-BUSINESS INQUIRES-
qualityhvacrtn@gmail.com
-Check out @TruTechTools -
Make sure you use promo code “QUALITYHVAC” to save 8%
-TOOLS I USE-
Supco Magnetic Umbrella: www.trutechtools.com/Supco-Ma...
Solderweld HVAC Brazing Pack: www.trutechtools.com/HVAC-15-...
Solderweld Hot Block Putty: www.trutechtools.com/SolderWe...
Navac 2cfm Battery Operated Vacuum Pump: www.trutechtools.com/NAVAC-NP...
Cordless-Vacuum-Pump-2CFM?affid=38
Accutools BluVac Micron Gauge: www.trutechtools.com/Accutool...
Accutools TruBlu Evacuation Kit: www.trutechtools.com/Accutool...
Veto ProPac LC Tool Bag: www.trutechtools.com/Veto-Tec...
Veto ProPac MC Tool Bag: www.trutechtools.com/Veto-Pro...
MeasureQuick App: www.measurequick.com/
Fieldpiece Job Link HVACR Charge & Air Kit: www.trutechtools.com/JL3KH6?a...
Fieldpiece Job Link Pressure Probe: www.trutechtools.com/Fieldpie...
Fieldpiece SC440 Meter: www.trutechtools.com/SC440?af...
Appion 1/2" Hose: www.trutechtools.com/MH120006...
Appion 3/8" Hose: www.trutechtools.com/Appion-M...
AccuTools Core Removal Tool: www.trutechtools.com/Accutool...
Malco Sheet Metal Snips (Left Cut): www.trutechtools.com/Malco-M2...
Malco Sheet Metal Snips (Right Cut): www.trutechtools.com/Malco-M2...
Malco Sheet Metal Snips (Bulldogs): www.trutechtools.com/Malco-M2...
Malco Sheet Metal Snips: www.trutechtools.com/Malco-MC...
Malco Turbo Shear Cutter: www.trutechtools.com/Malco-TS...
Malco Sheet Metal Hole Cutter: www.trutechtools.com/Malco-HC...
Malco Flex Duct Cutter: www.trutechtools.com/Malco-FD...
Malco Panduit Gun: www.trutechtools.com/Malco-TY...
Malco Sheet Metal Hammer: www.trutechtools.com/Malco-RH...
Malco Turbo Crimper: www.trutechtools.com/Malco-C5...
Malco Sheet Metal Pipe Crimper: www.trutechtools.com/Malco-C5...
Malco Reversible Hex Driver: www.trutechtools.com/Malco-MS...
Malco 24" hand bender: www.trutechtools.com/Malco-24...
-OTHER CHANNELS TO CHECK OUT-
@hvacrvideos
@hvacknowitall
@hvac-rvlogger
@hvacovertime
@curioushvacguy
@hvacuncensored
@hvacschool
@hvactoolreview
@measurequick
#hvac #ductwork #shurtape
Disclaimer I received compensation to complete this project for using Shurtape brand products. All opinions, projects and ideas are based on my own experience.
@joeyhanson7906 3 жыл бұрын
I just began my hvac career almost a year ago and love it. I watch your videos to learn as much as I can but also enjoy watching them!
@paulelliott7373 2 жыл бұрын
I've used old discarded, outdated credit cards as squeegees. Great video! Great instructions. Quality work!
@josephtapia4991 Жыл бұрын
I love seeing your work beacuse of the pride you take on it to the small detail. Awesome work! God Bless
@FlyEaglesFly19111 3 жыл бұрын
Good job. No many people care enough to seal. I just used 5 bucket of mud and 2 rolls of tape changing out my whole system. Stay safe great vid.
@daltonhedrick1942 3 жыл бұрын
Love it man, always pumping out quality videos. Keep it up!
@HVACUncensored 3 жыл бұрын
Loving the videos Zach. Really good content brother. Congratulations on the growth of the channel as well.
@joshuamangum3913 2 жыл бұрын
Some of the best hvac content out there on this channel....
@arcamposac 3 жыл бұрын
hello I'm from Brazil . I'm learning English to better understand your videos. you have great tools, congratulations you are an excellent professional
@davidshettlesworth1442 Жыл бұрын
Thank you for a very helpful instruction video with detailed explanations. A big help.
@BlueCollarBiceps 3 жыл бұрын
Another great video brotha!!! Clean as always. 👨🏻🔧💪🏼
@mike4796 3 жыл бұрын
You’ve been taught well. I don’t see most taking time to work to this detail.
@jlc2093 2 жыл бұрын
At this rate He probably takes a month to do a rough in a house
@aperlia6603 2 жыл бұрын
It's b/c we aren't given this much time to do jobs. $0.02.
@Boojyman 2 жыл бұрын
Most aren't making youtube videos as evidence of their labor
@robertdavies82 2 жыл бұрын
dang, this guy is a real craftsman. I wish I could hire him in my home state. He's a pro.
@ericpolstar9055 3 жыл бұрын
"Do your best, tape the rest" words to live by lol
@kennedycarey898 2 жыл бұрын
This is fantastic info my guy - nice work!
@ivorroberts3450 3 жыл бұрын
I like your attention to detail.
@242topboss 3 жыл бұрын
Awesome as always 👏🏼
@brandonprice3927 3 жыл бұрын
Seamless work Zach
@MattJMT Ай бұрын
Great video! I am new to the trade and appreciate how you explain everything!
@hvacworld7421 3 жыл бұрын
Awesome video. Very professional work
@Rhahdhdn 3 жыл бұрын
Love all the Milwaukee gear you rock 😎
@ericahd655 2 жыл бұрын
The squeegee info was great. Thanks great videos
@Jonacarpenter 4 ай бұрын
Looks great. Nice tutorial. Great piece. 👍✌️😁😉
@ronaldsanmiguel1545 3 жыл бұрын
Just subscribed. Your videos are very informative and helpful
@royadams7715 3 жыл бұрын
Nice clean work bro 👍
@daveodden6042 3 жыл бұрын
love these!
@scottparker9341 2 жыл бұрын
I'm a sheet metal worker as well.....can't believe you stapled the insulation, but whatever works for ya! I definitely give you props for actually using an applicator on the foil tape though👍
@joshtheld 2 жыл бұрын
Very nice work!
@UltraHydrophobiccoat 3 жыл бұрын
Quality work!
@zachbartlett2829 3 жыл бұрын
Ive always been able to wrap pipe up to 14 by laying the pipe parallel with the roll and just cutting at the end of the pipe instead of measuring.
@marioj.8059 3 жыл бұрын
Thank you for showing your process. I do strictly service and it’s nice to finally see and comprehend how some installs are done.
@kswitch87 3 жыл бұрын
Like to see more duct work videos brotha! I'm mostly tech work so I need more practice on my duct work skills lol
@kennethlobo4420 3 жыл бұрын
You super talented.
@GB-ue6wr 3 жыл бұрын
You did it just how I would do it at my house...👍
@95thousandroses 3 жыл бұрын
Looks great. What brand of cinch stapler are you using? Like it?
@williamdial1162 3 жыл бұрын
Great job. For those who can't do all that bending over(hernia), get two 8 ft. fold up tables and some sheetmetal and you have a great work table.
@micahdixon8787 2 жыл бұрын
It's gonna be hard to work with it like that think about it
@biblebloopers946 2 жыл бұрын
Damn that looks so good I I would set it in my living room as a piece of furniture
@The-H-inADHD 3 жыл бұрын
Awesome video brother, I have been doing installs for a little while now but this was some great info. Not sure what cost more but do you prefer installation over the bubble wrap?
@donnierobertson3088 3 жыл бұрын
Nice job and video
@samersarah957 7 ай бұрын
Very nice job bro
@kendallfitzgerald8599 3 жыл бұрын
Great job damn the haters that is just jealous of your success my brother!
@rjdestiny-mx4ir 3 жыл бұрын
I'm not sure for all brands but I think most brands of foil back give you the measurements on the packaging to wrap different size ductwork
@hvacroddy5261 3 жыл бұрын
Best installation technique on the internet. Love it
@WALTERLICIAGA 2 жыл бұрын
Nice work I wish I could take all my time at this jobs…
@mosears6808 3 жыл бұрын
Super talented, wish all HVAC techs cared this much...!!!! Love your tools and organization..
@xxjoigaxx 3 жыл бұрын
Looking good! Only difference I do is when wrapping the insulation around the pipe, I’ll tape down that first thick end to the pipe itself before overlapping the end where you remove the insulation. I feel like I never have to worry about the insulation sliding off or moving before adding taps/installing in general.
@xxjoigaxx 3 жыл бұрын
@Chris O'harra glad im not alone on that haha
@L8NiteCoffeeSips 3 жыл бұрын
Great work!
@jamestoy426 2 жыл бұрын
Nice work
@marcusmcduffie2106 3 жыл бұрын
Nice thank you for sharing
@davidsharkey3483 Жыл бұрын
Nice job .
@dubb6221 3 жыл бұрын
Clean work. What is the make and model of the stapler?
@andrewreisman6283 Жыл бұрын
Your videos are super helpful for me being a new apprentice. I have insulating down pretty well, but we make a fold on both sides and use staples that clamp shut like regular staples and we use a lot more duct butter than tape. What I'm having trouble with is insulating elbows. How do you insulate 45 and 90 degree duct elbows? Thank you for your time!
@mikekolczynski5665 Жыл бұрын
Make a pattern that's in the shape of a fish.
@hvac01453 3 жыл бұрын
The mastic tape is a good touch, but as some of these novices should know, there are alternatives. One is, duct sealant mastic. It has the consistency of warm peanut butter. It is applied with a chip brush all seams are hit. The drawback is, to mastic the pipe after it’s hung because bending and movement may cause connections to crack open. It’s the best method if you have to have a pressure tested system. Many states are now requiring this, because of shoddy work done in the past. The drawback to mastic Tape is that it’s very expensive. My own house I used mastic inside and out. To include all lineal joints. I have a friend that owns a union shop, he says that they are not allowed to use more than 6’ of flex on each drop. Everything is hard pipe. The norm for an independent is the renowned “Octopus” of flex. In the Boston area he said they will make you rip it out and start ver.
@TheBalognaPony 2 жыл бұрын
I used duct seal mastic on my home with the ridgid already being in place when we moved in. Much easier than taping all the joints fussing with those rolls while in a crawlspace. Imbedded some mesh tape as well and sealed over that. Rock solid connections now. Now wrapping insulation is a whole different story down there ughhhhh
@realgreycreative 3 жыл бұрын
Being in Nashville I'd guess you've done a few recording studio installs. What do you differently w/ the ductwork to keep them quiet? Love what you are doing with your channel, nice going.
@raiderrichard7291 3 жыл бұрын
I use to connect wyes all day for 8hrs at ac pro. That was one itchy job. The ty or wye is the metal thing you connect to the duct, it allows you to connect two pieces of duct together. But it wasn’t always wye or ty’s it was all sorts of metal applications some of them square.
@johnsilva1272 2 жыл бұрын
Love the work and videos that you do. Keep it up Zach!!! Curious on which staple gun that you use in this video? Thanks.
@mikekolczynski5665 Жыл бұрын
Looks like a Bositch T5. Called an outward cinch stapler. Bends the short ends of the staple outwards to grab the strings in the insulation.
@rodiona8781 3 жыл бұрын
In your opinion, what lasts longer mastic or tape? I'm reading mastic last longer or is tape tech on par?
@gingerstrand6153 3 жыл бұрын
Good video. Mastic man.
@Pennconst101 2 жыл бұрын
Great work. What staple gun is that? I’ve been on my knees fussing with FSK take every time I have to wrap Duct. That stapler will change my life!
@michaelmcewan5074 3 жыл бұрын
Looks great! Definitely recommend staggering the branch taps for increased plenum pressure. Love the videos, keep them coming!
@ynot6781 3 жыл бұрын
Go back to school , staggering has nothing to do with pressurization , flow , static
@michaelmcewan5074 3 жыл бұрын
@@ynot6781 It does. Take your own advice!
@hvac01453 3 жыл бұрын
Great video, talk about that staple gun. How do the staple ends curl, in order to hold the two pieces together? Wouldn’t the staples just fall out the same way they went in. Being just foil as a material.
@michaelnash8435 3 жыл бұрын
It's an outward clinch stapler. I have the same one he uses in this video, but I prefer the arrow t50oc. It pushes the curls outward so it would have to rip through the backing on the insulation. Just enough to hold it in place well enough and the tape locks it all down.
@staudenselerie6666 5 ай бұрын
here in sweden it is very cold in winter and watching you insulating that tube makes me feel warmer. thanks for gentle but steady handling of the duct situation. it clarified many things for me. however it also raised an important question, what is this tube for? thank you
@omarantonetti8417 3 ай бұрын
Its an air duct. For Heating and Cooling the home. When theyre manufactured via sheet metal in some areas you have to insulate them well or theyll sweat and give you a free rainforest inside your home
@AEVince 3 жыл бұрын
I use the bubble wraps because they’re much fast and they insulate pretty well
@shielduniversity419 3 жыл бұрын
Do you wrap twice?
@Alex-jo2oi 2 жыл бұрын
Isn’t bubble’s R value really only like 4.3
@brandonhanley8912 3 жыл бұрын
Where did you get your insulation ductwork? Curious about getting one
@thatdude9172 2 ай бұрын
Im in Manchester tn. Hvac!!
@felixrblanco 2 жыл бұрын
What type of stapler gun did you use? I bought one but the staples aren't grabbing the insulation. Thanks 👍🏻
@mitchellschloss4247 3 жыл бұрын
Man I worked in commercial installation and the amount of time this would take on a large scale would be absurd! This would be nice to milk the clock for a homeowner, but not in a job site setting. Duct butter/pookie/mastic is much faster, but it's very messy if you're new at it.
@NicRidic 2 жыл бұрын
Ah, I remember years ago when I first started the trade my first two weeks thats all I did. I'd look like I took a bath in it by the end of the day...damn near ruined ever pair of jeans I owned. good ol' Duct Butter!
@shielduniversity419 3 жыл бұрын
Do you pass the duct test with the mastic tape? I like to use duct sealant but it's messy
@heatncool 3 жыл бұрын
Please do a video on a 90 elbow
@MrSAMERAMER 3 жыл бұрын
How do the air duct cleaning ? Is it a HAVC maintenance company or special company for duct cleaning ?
@shielduniversity419 3 жыл бұрын
Can you make a video on insulating odd elbows or angles ?
@diaperdood1 Жыл бұрын
Could u use reflextix to wrap it instead?
@MrChaz0409 2 жыл бұрын
What is the name of that duct insulation?? Great job 👏🏻 I need it 🤩
@derekarmitstead26 9 ай бұрын
What brand stapler is that youre using for the insulation?
@martinheatingcoolingmartin4693 9 ай бұрын
What size staples? Can you staple bubble wrap? If so what size staples?
@mrbit10 3 жыл бұрын
In this video you used shurtape for the tap, on an older video, you used mastic... is this tape better, the same easier or maybe mastic is better is some instances or vice versa? thanks for the great videos.
@zachbartlett2829 3 жыл бұрын
They both have a time and place. If i was sealing the lock joint on pipe id use the tape since its a straight line. If i was doing a tap or pipe to pipe id use actual mastic since i can just run the brush around the circle rather than fighting with tape. Thats just my two scents
@zachtutor7998 Жыл бұрын
Was there ever a part 3 for this?? I can't find it :(
@rickyshores6633 3 жыл бұрын
I always take size of pipe x4 +4”
@Alex-jo2oi 2 жыл бұрын
To get the total inches required for a wrap?
@mancavechuck 2 жыл бұрын
Nice work, when stapling doesn't the staples go through the metal those creating possible hangups on the inside
@mikekolczynski5665 Жыл бұрын
No, the staples only catch the insulation.
@urbanman1516 Жыл бұрын
What staple gun and staple types are you using?
@rpsmith 2 жыл бұрын
I think this guy started his career at NASA!
@monkeesniper1834 3 жыл бұрын
I use my hat method get a roll of venture tape Tare off a piece stick it to the hat get it to where it can meet I use the tape to hold it in place
@percyfaith11 2 жыл бұрын
Is that just a regular stapler or something specialized for this?
@jonathannguyen5686 4 ай бұрын
Did part 3 ever come out?
@madeinusa1576 3 жыл бұрын
Do you stagger your taps?! To allow more back pressure inside duct, or do you just have them directly across from one another!?
@jasm817 3 жыл бұрын
I noticed the same thing 😂
@warbird101210 3 жыл бұрын
Wont matter....the hardest heat lead is the 1 after the reducer....its called aspiration.....
@mth2068 Жыл бұрын
What stapler are you using?
@waynemiles7027 3 жыл бұрын
Do you ever just slide flex duct over your metal pipe?
@mardyburnett2139 Жыл бұрын
Where can you buy the insulation?
@josephgomez2249 3 жыл бұрын
This man is probably the god of gift wrapping
@beachrider21 2 жыл бұрын
If the insulation is 3" thick shouldn't you calculate circumference for 20" diameter plus 3" overlap so you don't compress the fiberglass and lose R value? If you cut the insulation to 54" on 14" duct doesn't it get compressed to about an inch thick?
@gtg837h 2 жыл бұрын
I think you are more correct than what’s shown in the video. According to the document below, the stretch out dimensions for 3” of insulation on round pipe are P + 17” (includes 2” tape flap). I’ve used this approach and the insulation does appear to fit quite loose, but that is certainly better than too tight. See pages 28-29: insulationinstitute.org/wp-content/uploads/2015/11/AH121.pdf
@dwightsweatt8157 3 жыл бұрын
I have a question about the taps. I use a heat gun before putting my screws in. Am I over doing it?
@michaelnash8435 3 жыл бұрын
I always mastic over them anyways. I'd say we're both over doing it, but it's better than a leaky duct.
@googsy12582 3 жыл бұрын
Great video very informative but why not just use insulation sleeves from your supply house? Much faster and less labor costs
@zacharymullins7576 3 жыл бұрын
Where can a homeowner get the saddle taps you used? I can't seem to find the self adhesive style for mounting to round duct mains.
@mikekolczynski5665 Жыл бұрын
Most supply houses won't sell directly to homeowners.
@davidnunez7889 2 жыл бұрын
Hey can you show us how to insulate a 90 degree steel elbow
@julioalvarez6294 3 жыл бұрын
Always ready to lay the pipe down
@marcodelapazjr5973 8 ай бұрын
Hello, i am interested in this type of duct, where can i purchase it?
@macoy321 2 жыл бұрын
Looks clean. But imagine doing this in the crawl soace attic. 😥
@jasonautry24 3 жыл бұрын
Just wondering why you don't use the gooey mastic stuff for sealing the taps? Thank you for the videos!
@picklerix6162 3 жыл бұрын
That’s what most people use because that tape is super expensive. The tape is cleaner.
@TacticalChris 3 жыл бұрын
Because this is an ad for tape
@kevink8560 2 жыл бұрын
@@picklerix6162 but mastik is a much better and longer lasting seal
@petekane2501 2 жыл бұрын
The 3” insulated metal pipe wrap what is it called & where does a DIY get it. I have not seen at big box places?? What is the width!
@mikekolczynski5665 Жыл бұрын
Usually purchased at a supply house. Supply houses usually don't sell to homeowners.
@nsant 3 жыл бұрын
Spent 15 years in the field. Now I'm making more money as an industrial maintenance guy. No more attics or crawlspaces. No more working in the elements.
@jeffvandagrif 2 жыл бұрын
And yes your gonna use alot of staples 😉
AGL Mechanical Tips
Рет қаралды 22 М.
МИЛАНА ТУТ 👀
Рет қаралды 4,8 МЛН
Diversified Energy
Рет қаралды 142 М.