Don’t Do This!! | HVAC Hacks
Рет қаралды 54,329
2 жыл бұрын- SUPPORT THE CHANNEL -
www.patreon.com/qualityhvacr?...
- Check out @TruTech Tools, LTD -
www.trutechtools.com (Use promo code “QUALITYHVAC” to save 8%)
- HVAC TACTICAL -
hvactactical.com/ (Use Promo Code "QUALITYHVAC" to save 10%)
- FOLLOW ME -
Instagram: @qualityhvacr
- BUSINESS INQUIRES -
qualityhvacrtn@gmail.com
- TOOLS I USE -
Fieldpiece SC480 Meter: www.trutechtools.com/Fieldpie...
Fieldpiece SC680 Meter: www.trutechtools.com/Fieldpie...
Fieldpiece Job Link HVACR Charge & Air Kit: www.trutechtools.com/JL3KH6?a...
Fieldpiece SM380V Digital Manifold: www.trutechtools.com/Fieldpie...
Veto ProPac Tech MCT Tool Bag: www.trutechtools.com/TECHMCT?...
Supco Magnetic Umbrella: www.trutechtools.com/Supco-Ma...
Solderweld HVAC Brazing Pack: www.trutechtools.com/HVAC-15-...
Solderweld Hot Block Putty: www.trutechtools.com/SolderWe...
Navac 2cfm Battery Operated Vacuum Pump: www.trutechtools.com/NAVAC-NP...
Cordless-Vacuum-Pump-2CFM?affid=38
Accutools BluVac Micron Gauge: www.trutechtools.com/Accutool...
Accutools TruBlu Evacuation Kit: www.trutechtools.com/Accutool...
Veto ProPac LC Tool Bag: www.trutechtools.com/Veto-Tec...
Veto ProPac MC Tool Bag: www.trutechtools.com/Veto-Pro...
Fieldpiece Job Link Pressure Probe: www.trutechtools.com/Fieldpie...
Appion 1/2" Hose: www.trutechtools.com/MH120006...
Appion 3/8" Hose: www.trutechtools.com/Appion-M...
AccuTools Core Removal Tool: www.trutechtools.com/Accutool...
Malco Sheet Metal Snips (Left Cut): www.trutechtools.com/Malco-M2...
Malco Sheet Metal Snips (Right Cut): www.trutechtools.com/Malco-M2...
Malco Sheet Metal Snips (Bulldogs): www.trutechtools.com/Malco-M2...
Malco Sheet Metal Snips: www.trutechtools.com/Malco-MC...
Malco Turbo Shear Cutter: www.trutechtools.com/Malco-TS...
Malco Sheet Metal Hole Cutter: www.trutechtools.com/Malco-HC...
Malco Flex Duct Cutter: www.trutechtools.com/Malco-FD...
Malco Panduit Gun: www.trutechtools.com/Malco-TY...
Malco Sheet Metal Hammer: www.trutechtools.com/Malco-RH...
Malco Turbo Crimper: www.trutechtools.com/Malco-C5...
Malco Sheet Metal Pipe Crimper: www.trutechtools.com/Malco-C5...
Malco Reversible Hex Driver: www.trutechtools.com/Malco-MS...
Malco 24" hand bender: www.trutechtools.com/Malco-24...
I've got a new customer with an Amana heat pump package unit that is not keeping up on hot days. Driving out to the Riverside job to do the first maintenance on the Bosch split units and changing the Aprilaire filters. Then we're looking at a possible new shop. Hope you enjoy the video!!
#ductwork #hvac #heatpump
@huntpeterson9699 2 жыл бұрын
definitly a fan of the longer videos! im a helper myself, love watching your content keep it up.👍
@aaronburke2469 2 жыл бұрын
Heck yeah. Love these longer vlog style videos.
@Eddy63 2 жыл бұрын
Good vid and good luck on your new journey ... Thx for posting ...
@cuneight8 Жыл бұрын
I’am HVAC student. Learning a lot from your videos, thank you
@aaronhickey4879 Жыл бұрын
Watching this as a service tech, he knows his shit. I'm agreeing with everything that he says, gotta find that cleaning setup though. He won at Amazon purchases.
@dhaval32mistry 2 жыл бұрын
Vlogs are cool man! Keep them flowing through
@russiawithoutpolitics8269 Жыл бұрын
I like this video. There are so many modern HVAC equipment! It's nice!
@TrunkRump 11 ай бұрын
I would actually really enjoy working with this guy irl I’m really new to this channel and want to go to school for HVAC. Really enjoying it so far, no way to get bored!
@markmcelmeel7850 2 жыл бұрын
The whole getting pizza thing every Friday is very wholesome. I absolutely love it dude
@bobboscarato1313 2 жыл бұрын
And very fattening as well..!
@242topboss Жыл бұрын
Wow I actually remembered you installation on this in the attic running the pipes
@user-kt2hb8xr3p 2 жыл бұрын
Great job, thank you brother. You are so talented
@osieldaveiga5860 2 жыл бұрын
Parabéns aos teus vídeos!!! Você trabalha pra valer!!!
@mattbilodeau2433 2 жыл бұрын
You gotta link for that wand you stick in the condenser. And do you have any training resources for those bosch units. My company installs a lot of them and I want to be ahead of the game for when that day comes when they break down
@bobboscarato1313 2 жыл бұрын
The wholesaler you buy Bosch units should have them in stock or call the factory!
@MsckMatt 2 жыл бұрын
those -14 filters are a good series of filter. we use them for our annual maintenance members and they do normally last 12 months
@HVACRTECH-83 2 жыл бұрын
Just because you wait 12 months to change them doesn't necessarily mean they last 12 months lol
@marketmash6953 10 ай бұрын
A filters life span is based on its exposure to the filtered elements. The 90 day, 6 month, etc is crap. Change the filter when it’s dirty.
@marcelocortez18 2 жыл бұрын
This was a cool video, def make more of this style video!
@krisraps 2 жыл бұрын
Wow, Such A COOL Video ! ! ! Hope To get Some Ideas For My House
@weiss27md 2 жыл бұрын
Great VLOG. Can you do a video on mold inside of the HVAC system? Why mold would develop on the supply duct boots.
@tristanallen9315 2 жыл бұрын
or if you in a high humidity environment then you'll have the humidity from the household going into the indoor unit and out the drain line. thus at one point or another you'll have a dark, damp enclosed space that's suitable for growth.
@HVACRTECH-83 2 жыл бұрын
@weiss27md on the inside or outside of the boot?
@weiss27md 2 жыл бұрын
@@HVACRTECH-83 on the inside, in the fiberglass insulation board.
@not.enoughto.go.around6176 2 жыл бұрын
Some fun, some work! Most sustainable way to do it bro
@HVACRTECH-83 2 жыл бұрын
But what's the pressure drops on those 4"filters in merv 11 13 and 16? Most systems won't be able to handle them most likely without modifications at least. I think they're a good idea for new installs if they're figured into the tesp and you find it to be allowable
@charlesdavis7461 2 жыл бұрын
Sparta nice and fishing in the Calf Killer River, nice.
@AaronPowellvox Жыл бұрын
What is that extender thing that you put on the hose? I need one of those. I love your videos btw
@nickweissinger1171 2 жыл бұрын
Watch your videos all the time, I’m in the area & been doing hvac over a year & a half. I have a job rn, but I’m always looking to better myself and my career would love to work for your company, been keeping up with your vid’s for a while commented like a year ago with this same type of comment🤣gonna keep trying. Seems very professional and a great learning experience just had my baby 6 months ago and want her to have a lot & I’ll put in work. I’m located in elkton ky but can travel & will show up as needed every damn day
@Emily-be1yw 2 жыл бұрын
This was so wholesome. I hope he sees this comment. Congratulations on your baby.
@dylsky100 2 жыл бұрын
Man I wish I was your helper! Pizza and all! Haha. You do great work and are very smart! I like trying to take my time to do a good job my company I work for is just bigger and doing new construction they just want us to get stuff done asap and I've already been a lead for a year only been doing this for 3. But I don't know anything about service yet only install. I'd love to learn someday
@thesilentonevictor 2 жыл бұрын
Great job Zack large space a few cosmetics to the place an ready to go
@ErrorInvalidName 2 жыл бұрын
Eesh those bends in that duct, where did ya get the long thin nozzle you skip down inside the units?
@TedCookHVAC 2 жыл бұрын
Oh my gosh that ductwork !!!!
@robalexander7348 Жыл бұрын
That's a enjoyable video Zac, nicely done, Trevor sure enjoys his Pizza, i'd like to see him wash one down with a coffee 😁 👍
@markwoten6679 Жыл бұрын
How do you prevent bending fins with that wand? Bent fins reduce heat transfer from coil.
@FranciscoHernandez-zc6xt 3 ай бұрын
Saludos from California 💯 your area is very nice💯
@jph77 2 жыл бұрын
Why is there a water heater in the crawl space? Is that up to code for Nashville. I live 20 minutes from Nashville and I've never seen that.
@jordanfinehair Ай бұрын
Hey bro , new guy learning here . :) why do you need to use the foam gun on those special cleaners specifically . xo from ANADA
@stuemler 2 жыл бұрын
I have a 62 home with a ton unit 1000sq ft. My garage is 58 with back area, a breezeway added likely after the 90s, and a sun room with no duct. I was told to plug into the house air and put 1vent in the breezeway for the 500 sq ft. Instead I got a friend and we're reinforcing the attic for a new furnace, AC, and duct unit. Any advice?
@vegashvacr7098 2 жыл бұрын
Mini split for sure
@Iamlegend114 2 жыл бұрын
Is zoning not an option for that package unit?
@jugqug57 2 жыл бұрын
When ever u see silly string spiders in the attic you know your in for some fun 😂
@umerahmad3077 Жыл бұрын
Bruh, you got me craving pizza now, and that is especially with jalapeños & banana peppers lmao 🤣!
@Zee-hl5iu 2 жыл бұрын
where did you find and what is that extender that you use to clean the inside of the condensers
@bobboscarato1313 2 жыл бұрын
Yeah that was pretty cool; it must be a late arrival.
@xElchulo305x Жыл бұрын
Hi good morning Can duct mastic sealant do you recommend ? Thanks
@cpaul57 Жыл бұрын
Do you run service calls in the middle of the night? What's it like to have weekends always filled up?
@lshankle19 Жыл бұрын
Question, is there a reason to use chemical on coated coils? Most of them are designed for straight water to clean. I work in Commercial buildings and have ran across many Daikin Condensers with the blue coating deteriorated because folks used chemical to clean it. And I found the owners manual and it says water only, no chemical..
@meadgunner3387 2 жыл бұрын
So what cleaner are you using on that Bosch coil. We were told by our Bosch rep to not use cleaner on the coils.
@onenikkione 2 жыл бұрын
Viper coil cleaner
@jgraeff1 Жыл бұрын
What’s the hose and hose extender you used to clean the inside of the coil?
@kevinsmith998 Жыл бұрын
I believe they are power washer attachments. I purchased one that looked like it, hasn't came in yet. I'll try to hop back on and let you know how it works. Xiny Tool Pressure Washer Extension Wand 10 pk is the one I picked up via amazon. Hope this helps if you're still looking!
@EastDallasKicks 2 жыл бұрын
Dude why do amana cases look so good.
@242topboss Жыл бұрын
What kind of boots are they you are wearing?
@LIBERTY0RDEATH Жыл бұрын
Damn you hiring? Fishing on the clock is my kind of job. My mom lived in Sparta tn for a while, and than she lived outside of Murfreesboro where they did that bar rescue at that biker bar.
@supremegaming6837 2 жыл бұрын
what gages are those? they are sick
@DIY3v Жыл бұрын
Is that the Just Love Coffee in Tomball? If so, that ain't far from where we live.
@davids970 2 жыл бұрын
Mini splits upstairs 🤙🏻
@lawrenceanderson6167 Жыл бұрын
I grew up in NY. Pizza Hut is not pizza. Pizza Hut pizza tastes the same as the cardboard carton it comes in LOL
@JBra1382 2 жыл бұрын
If the duct fits on the trunk line. Go for it. Everybody wants to add square footage to their living area. But nobody thinks about how to do it properly. And I want to know who put that duct on there and said. Yeah. It should work.
@coreyschultz2002 8 ай бұрын
Do you ever worry about air restrictions with that high of a MERV? I was always taught that anything above a 8-10 can cause high limit trips and a premature life for the blower if the customer doesn't check the filter religiously. And know what to look for when they pull their filter out to check. Not to mention general air restriction to the system? I have been in the field for less than a year and am about to finish up schooling, but what I have heard again and again is to buy pleated filters that don't exceed MERV 10. I do llive in MN, so maybe it's different up here? We have far less days per year to even crack windows for fresh air than many other parts of the country. Just curious as to your thoughts, you are definitely more experienced than myself! Thanks
@btarb242 2 жыл бұрын
Curious, is it feasible to omit the 2nd stage cooling wire on a 2 stage heat pump to get more heat capacity? example.. manJ heat=53k and cool is 29k. Using a two stage 4 ton unit would get me most of the heat and be only a about 15% oversized for cooling that's limited to the 70% stage 1.
@danielrodriguez-hj5ky 2 жыл бұрын
Nope.
@bnasty267 2 жыл бұрын
You can use a high-end thermostat like the non-entry level Ecobees to control that (please not Nest junk.) The Ecobees allow you to set parameters for when the 2nd stage cool kicks based on temp delta. You could set that to something like 5F and it shouldn't ever hit that if the stage 1 AC can keep up. I do that on my 2S HP, and I almost never hit 2nd stage for AC, but definitely do for heat (I'm near Philly.)
@btarb242 2 жыл бұрын
@@bnasty267 That's brilliant - thanks! I was thinking i'd need to add a relay to eliminate stage 2 when in cool mode.
@HVACRTECH-83 2 жыл бұрын
@@btarb242 probly better to size the system for your cooling load and just do a dual fuel setup honestly. Or get electric heat strips for your aux heat. But what I would do is run it by the manufacturer or a rep for that brand but I'm sure they will say it's not advisable. It will depend on the systems performance in first stage cooling. There's performance charts for every unit available
@cristianalvarez8904 2 жыл бұрын
Nice hat!
@jasonnelson8357 11 ай бұрын
Man knows a good Pizza. i would comment on his work ...but we all know he's good! P.S. I'm with you on the coffee Trevor
@DannyPlays96 2 жыл бұрын
How different is HVAC in your region of america compared to the north east? Iv been wanting to leave new york and move south and start over there. Any advice?
@special_k-hvac 2 жыл бұрын
Learn heat pumps
@bobboscarato1313 2 жыл бұрын
Yes when I left NY I moved to TX; great place for business!
@paulross8902 2 жыл бұрын
The condensate drain on the package unit had no trap?
@mattalexander8919 2 жыл бұрын
Positive pressure, no need for one.
@achempel46 2 жыл бұрын
Any issues with humidity control on the Bosch systems?
@HVACRTECH-83 2 жыл бұрын
As with any system, if it's sized, designed, installed and maintained properly there will be no problems with humidity control
@elijahbrown9738 2 жыл бұрын
Is there evidence that putting a shop vac on the drain is optimal? I usually recommend that to customers until I can get there and use nitrogen from inside and use (insert preferred chemical treatment) on the drain. Edit: saw the rest of the video of the things you use. Love your packout set up,btw. But if you didn't show taking the A/H panel off and getting those chemicals in the actual drain pan to clear out the build up on that first threaded fitting, please do, so some of these maintenance guys that watch your videos pick up on it.
@tristanallen9315 2 жыл бұрын
I use a shop vac on a daily basis for regular maintenance and very rarely do I have issues with call backs. I only use nitrogen if the drain is slow when I'm finished and priming the line or if it's a stubborn clog. (And never on a common stack lol)
@mordeth999 2 жыл бұрын
While I do use nitro on a drain very rarely, i highly recommend using some form of negative pressure or suction on a drain line as you don't wanna blow a pvc fitting off in a wall somewhere. Uniweld makes an awesome drain cleaner called The Supersuck, or something like that, which works really well.
@ThePete2432 2 жыл бұрын
Yes, I used one for 15 years doing supermarkets. I’ve had a ton of drains that were plugged solid and nitrogen wouldn’t unclog them… but a vacuum on the other end would
@elijahbrown9738 2 жыл бұрын
@@ThePete2432 did you use an expanding fitting? I'm heading this all off my own internal logic, in fairness. I've just always assumed pushing ~300-~400lbs of pressure through the line is going to sweep away much more build up than whatever negative pressure a shop vac pulls. My brain tells me that water (and Air) always takes the path of least resistance, so with the low pull of the shop vac it can just flow over the top of any restriction. Nitrogen has that better force pressure. Either way I think chemicals should always follow whatever method.
@Jpalms123 2 жыл бұрын
my reasoning is very similar to mordeths up there, the cleaner you put in the pan and ptrap will break down build up over time. i normally tell people nitrogen is a last resort, a chemical, some water down the drain and vacuum has worked 95% of the time. the last thing you need is a homeowner calling back in saying your guy was out here and now my wall and floor are soaked cause you blew something loose or cracked it with too much pressure.
@MrAbYounes 2 жыл бұрын
Did you check the electric heat? They might have swapped out the stat and the electric heat is enable in the stat, I have had that happen so many times
@burnem94 2 жыл бұрын
Wouldn’t have almost a 20 degree split
@thenamesjohny1490 2 жыл бұрын
@@burnem94 ur mom has a 45 degree split
@jakobharris2719 2 жыл бұрын
10:56 Did they have a package unit before?
@gregoryallen790 Жыл бұрын
Pressures are low on that Goodman package unit
@zack9912000 2 жыл бұрын
Bet they got a great price
@Myopinion540 Жыл бұрын
You could have just put a zone system gain a half of ton and save the homeowner money . fixed that duct work
@BobbyFritts Ай бұрын
Pizza on Friday is very important.
@dolfinwriter5389 16 күн бұрын
Doesn't anybody get home inspections before they plunk down multiple hundreds of thousands of dollars on a home anymore? So Mr. selling homeowner, you converted this upstairs into livable space. Is any of that work permitted? Did you consider the cooling and heating capacity of this unit before adding these shitty ducts to that space? Did the selling inspector (if they had one), ask ANY questions? Did he even look at the AC unit and compare it's capacity vs. advertised square footage of the home?
@elmerramirez1215 2 жыл бұрын
Hey man I want to start hvac company myself but Currently I’m in maintenance which I do installs, and work on ac which im really familiar with the systems but not all of them do you suggest I should go to hvac company instead
@elmerramirez1215 2 жыл бұрын
So I can gain more experience in the hvac field and then doit?
@Kilo5910420 2 жыл бұрын
Yes i agree on getting more experience 1st
@JP-zz5rm 2 жыл бұрын
@@elmerramirez1215 yes work on commercial and residential for at least a few years before doing a one man show! You don’t want to tell the customer you don’t have the experience to do a job for them if it’s a system you haven’t worked on yet. I’ve worked 3 years as a maintenance tech and have now been doing residential & commercial for the last 2 years and am now getting ready to do my own thing!
@elmerramirez1215 2 жыл бұрын
@@JP-zz5rm wow good to hear man and yeah I think that’s what I’m going to do since it does make sense to go prepare thanks man
@elmerramirez1215 2 жыл бұрын
@@Kilo5910420 thanks man
@bendaltzy2984 2 жыл бұрын
it would be cool to see a heat load calculation to prove the unit is too small. no pun intended lol
@ozziewelcome5612 2 жыл бұрын
Good
@WALTERLICIAGA 2 жыл бұрын
Cool gadgets. I wish I could afford
@Clamjammer Жыл бұрын
Hate using chemical on coated condenser coils 😶
@matthewdykes9548 2 жыл бұрын
Trap brother trap, humidity, classic Goodman.
@WALTERLICIAGA 2 жыл бұрын
Nice Boss. Get you pizza!!
@onenikkione 2 жыл бұрын
A trap that can be taken apart 11:54 and cleaned - YES
@HVACRTECH-83 2 жыл бұрын
Keep glue unions on your truck.
@AmericanFarmerHVAC2024 2 жыл бұрын
Are you just an HVAC tech or a musician? You are in Nashville. Just curious.
@bobboscarato1313 2 жыл бұрын
It could be both I was and HVAC owner and also played trombone!
@latinoheat61987 2 жыл бұрын
Just put a zone board with 2 dampers
@jfmc2581 2 жыл бұрын
3:06 Only Hacks poke holes in Duct work!!
@benjaminbills1998 2 жыл бұрын
What experience do you have? It's pretty common over here. I install so It's not something I ever do but I see caps and plugs all the time. Real standard practice.
@serialseatsniffer5610 2 жыл бұрын
Oh gtfoh. Canvas connector is my first place I'm going before I drill a hole a hole cut a flex.
@benjaminbills1998 2 жыл бұрын
@@serialseatsniffer5610 I wouldn't cut flex. That is pretty janky I guess
@cesarmoore7996 2 жыл бұрын
You obviously have never done a quality and thorough system diagnosis, that’s alright though, not everyone can be good techs
@HVACRTECH-83 2 жыл бұрын
@@benjaminbills1998 on installs is where these holes actually need to be drilled so you can set the system up properly. Then you put plugs in. That way a tech in the future can test if there's any issues going on. But if you're installing systems and not setting them up, you shouldn't be installing them. Sorry but it's the harsh truth. Too much of this going on and a major majority of problems I see are do to poor installation practices
@smacleod69 2 жыл бұрын
Where was the Hack job? Except for the flex going to the second floor that looked like crap.
@trevonfannin1993 Жыл бұрын
Why not separate it and put on zones
@stephwaylonwells3218 2 жыл бұрын
👍
@metelljob1064 2 жыл бұрын
as for me in south florida, i'm done with school and i can't find a company to start.
@MrAbYounes 2 жыл бұрын
Start your own
@metelljob1064 2 жыл бұрын
@@MrAbYounes need experience. In 3 years if everything goes well I'll start my own
@aaronfagerson3656 2 жыл бұрын
It's good your trying to learn on your own time and dime it will take u far
@aaronfagerson3656 2 жыл бұрын
I recommend books as many as you can afford
@metelljob1064 2 жыл бұрын
@@aaronfagerson3656 ok thank you for the advices. Since I've learnt about Goodman at the school I think now it's time to learn on the other manufacturers
@galibkhankhan3958 Жыл бұрын
Hi sir
@NightSky777 Жыл бұрын
Don't know about Sparta TN, but in So Central TX, the Puzza Buffet is GONE! ...Now just a relic of the past.. [..Thanks JB, Covid Insanity & your local Dems..]
@xuandung80 Жыл бұрын
I can work together with you
@lhr1701 2 жыл бұрын
Pizza Hut is NOT Pizza !!!!! Oh yeah I live in NYC so I guess that is why I say that . LOL
@robertopod1968 2 жыл бұрын
You have to be sponsored. Wth. What is so much better about the Aprilaire brand merv12 or 16 filters? What exactly makes them easier to install?
@tekjunkie28 Жыл бұрын
Baitcasters? DDDDDDDAAAAAAAAMMMNNNNN Pro fishermen too!
@mackenziegray2090 2 жыл бұрын
how does the duct work affect temperature split?
@special_k-hvac 2 жыл бұрын
High static would over cool the coil
@HVACRTECH-83 2 жыл бұрын
Lower airflow= higher temp split higher airflow= lower temp split. It's the contact time between air and coil surface Air volume passing over the evap directly determines your sensible/latent ratio so it's very important to have proper duct sizing to have the correct air volume across the coil so you can have the correct amount of dehumidification. Too much air flow=not enough dehumidification and a low temp split so you lose out in both sensible and latent heat removal. Not enough airflow= higher temp split and latent removal for a short time, but it wont cool or dehumidify the space very well because not enough air volume for that space,then that water on the coil will freeze because the refrigerant pressure/temp will be too low/below 32f because it doesn't have enough heat to absorb anymore do to low air volume. Once that happens it snowballs downhill from there and gets worse and worse until you slug your compressor with liquid and greatly reduce its life or kill it. That's why it's so important to keep your air filters changed out frequently. Every 3 months generally. More often if necessary. So the goal for us techs/installers is to set the system airflow so it's in the sweet spot for proper design latent/sensible heat removal. And that changes based on location. Hope that helped a little,it gets alot deeper than that
@fernandorauda7338 Жыл бұрын
Nothing against Bosch but I’m not a fan of the units me and my boss and his company usually sell American Standard and Rheems our market is a bit upper class though lotta rich people in Boca Raton
@quinnhaynie7767 Жыл бұрын
Clickbait title but good video as always
@dila12345 2 жыл бұрын
279psi is too low for 410a on the head.
@special_k-hvac 2 жыл бұрын
Depends on the ambient and newer high seer equipment will have lower head pressures
@HVACRTECH-83 2 жыл бұрын
Yeah I second special k on that. Many variables determine head pressure and 280 is in Fact quite normal with a low load as was the case in the video. No problems there at all, superheat was low, I would have liked for him to adress that unless the filter was the reason and it straitened out after he changed it,but I don't think he mentioned it. Could be low airflow, not sure what max tesp is on that system but if its .5 then he had way too much and those filters may be the culprit
@ANYJ8993 2 жыл бұрын
Don’t wear shorts for sure
@michaelkuprian01 2 жыл бұрын
Definitely remove upstairs duct work and add mini split.
@winstonwright3613 2 жыл бұрын
Trevor .... will eventually change his mind. Once all ghat youthful energy wears off, and he's a little older and needs a little help to get wired instead of being naturally wired.
@davidviscaino9895 2 жыл бұрын
Yes it’s not for him
@rogerwhiting9310 Жыл бұрын
I dont see ANY response to feedback. That makes me MUCH less interested in a subscribed channel
@whoisderf 2 жыл бұрын
0:42 Bro, that turn was absolutely terrible. But gotta get that footage for the video…. One day it’ll end up costing you.
@cvalentine2297 2 жыл бұрын
Honeywell Filters are better and easier
@ryanlindner5566 2 жыл бұрын
i DESPISE the aprilair filters that collapse...
@cincinnatikid47 Жыл бұрын
My goodness this dude is clueless
@mchanwahtuse6140 2 жыл бұрын
Lol your racist what’s wrong with the black coffee
@HamiltonMechanical 2 жыл бұрын
Zach doesn't love us anymore :( Haven't seen you on overtime in ages bruh! You wanna talk about hack, give me your email and I'll send you photos of the trash I have going on at my house! LOL. 1960s build that had original a/c, unit was last swapped in the mid 90s, but no one has ever fixed the problems. Trunk drops down to a 5x14 and then they ran a 3" pvc sewer line through it. AND the ceiling can't go any lower LOL. Gonna have to get creative here :)
HVAC GUY
Рет қаралды 62 М.
Нарезки из фильмов
Рет қаралды 1,5 МЛН
Marta and Rustam
Рет қаралды 4,5 МЛН