Saturday Emergency Grocery Freezers & Coolers Are Warm

Рет қаралды 15,567

4 ай бұрын

Saturday I had a service call for several freezers and coolers running warm. If it could be wrong then it was going to be. Check it out, this was over three hours long and I cut it down to 36 minutes. I edit all my videos to get to the point and no BS.
- Purchase your tools at www.trutechtools.com?aff=13 and use the offer code SURVIVAL to save 8% on your total purchase (exclusions may apply) -
D-TEK Stratus Detector trutechtools.com/Inficon-D-TE... 13 nt-Leak-Detector-and-Portable-Monitor?aff=
D-Tek 3 Leak Detector trutechtools.com/inficon-d-te...
Inficon Recovery Machine trutechtools.com/Inficon-Vort...
Testo 557 Manifold trutechtools.com/testo-557s-s...
Testo 550 Manifold trutechtools.com/testo-550s-s...
- TOOLS I USE -
FULL TOOL LIST ON THIS PAGE - kit.co/hvacrsurvival
💥 Amazon Store: www.amazon.com/ref=as_li_ss_t...
SHORT TOOL LIST BELOW
Fenix PD25R (EDC Light) - amzn.to/431c7C1
Fenix PD35 V3.0 (My Daily Driver) - amzn.to/4c0w7cf
Polyamide Clip-On Kydex Flashlight Holster for Fenix PD35 - amzn.to/49XjQ6k
Form-A-Funnel Flexible Draining Tool - amzn.to/3OXQwVr
MTR Micro 6000 Rosebud Heating Tip - amzn.to/3Qpmk5s
MTT Micro 6000 Flexible Twin Tip - amzn.to/40sTu92
MTF-5 Cap'n Hook Tip - amzn.to/3SnGr6E
Uniweld 71 Welding Handle Needed For Above Tips - amzn.to/3QiNJpC
TOPDON TC003 Thermal Imaging Camera, 256x192 IR High Res amzn.to/3sWLTTn
RIDGID 31305 Model E-110 9.5" Offset Hex Jaw Pipe Wrench - amzn.to/3Bar08y
Klein Tools Ratcheting Box Wrench 1/4 x 5/16 amzn.to/3GOpBrG
KNIPEX Tools - 10" Pliers Wrench amzn.to/3U7RRJf
KNIPEX Tools - 10" Cobra Water Pump Pliers amzn.to/3Wje8Wn
Knipex Tools - Mini Pliers in Belt Pouch amzn.to/3WguyyH
KNIPEX Tools - 4" Cobra XS Water Pump Pliers amzn.to/3UaQiKA
Bahco -6" Wide Mouth Adjustable Wrench amzn.to/3sHIsMV
Bahco - 8" Big-Mouth Adjustable Wrench with Rubber Handle - amzn.to/3SPhDB7
Knipex - 9.5-Inch Ultra-High Leverage Lineman's Pliers amzn.to/3DTLJ2h
Klein Tools Diagonal Cutting Pliers with Angled Head - amzn.to/3zuBVJb
Klein Tools Stripper, Crimper Tool - amzn.to/3gQQ6Su
Klein Tools Wire Cutter and Wire Stripper - amzn.to/3Fs627W
Klein Tools Kurve Wire Cutters, Heavy Duty Wire Stripping Tool - amzn.to/3FseIuW
Klein Tools Heavy Duty Automatic Wire Stripper - amzn.to/3SQdZab
Klein Tools Crimping and Cutting Tool - amzn.to/3TPIgXU
Klein Tools Screwdriver Adjustable 4 to 8-Inch amzn.to/3Nl6KWz
IDEAL INDUSTRIES Digital Circuit Breaker Finder - amzn.to/3DoBFwm
Fluke 376FC AC/DC Clamp Meter with iFlex - amzn.to/3UaNyx2
Fluke 62 Max Industrial Infrared Thermometer - amzn.to/3SNdwWg
Fluke 902 FC HVAC True-RMS Clamp Meter - amzn.to/3Ws7OfB
Fluke 87V MAX - amzn.to/3U6Rlv9
Fluke Networks Pro3000 Tone Generator - amzn.to/3WedklG
Fluke - FLUKE-52 Dual Input Digital Thermometer amzn.to/3zwFdf1
Ideal Safe-T-Grip Fuse Puller - amzn.to/3zsw2w4
Klein Tools Canvas Zipper Bag - amzn.to/3WgnJxq
Uni-Paint PX-20 Oil-Based Paint Marker - amzn.to/3sE3R9T
5 Gallon Bucket Topper and Organizer - amzn.to/3sGi2Ll
Stabila Magnetic Pocket Level PRO with Holster - amzn.to/3FtYLo0
Clip & Carry Kydex Multitool Sheath for LEATHERMAN SURGE - amzn.to/3TPJfHA
Kydex Multitool Sheath for LEATHERMAN WAVE & WAVE + PLUS - amzn.to/3sJlhlg
Cooper Atkins Thermistor Thermometer - amzn.to/3DLeHkC
GEARWRENCH Internal/External Ratcheting Puller 7 Ton 2 or 3 Jaw - amzn.to/3FxTU5l
- CONTACT INFO -
hvacrsurvival@gmail.com
- FOLLOW ME -
Instagram - / hvacrsurvival
Facebook - / hvacrsurvival
Warning Notice Disclaimer - Video content listed on the channel HVAC*R Survival is for entertainment purposes only! **Do not attempt anything said or seen on my videos, The tasks that are shown are dangerous and deadly without proper training.
**This page contains affiliate links, which means that if you click on the link and make a purchase, I’ll receive a small commission. HVAC/R Survival is a participant in the Trutechtools, Amazon Services Associates Program.
#hvacrsurvival #hvaclife #hvacservice #hvacr #refrigeration #troubleshooting

Пікірлер: 165

@zunar_j5_933 4 ай бұрын

I for one like the longer & deeper explanation format videos!

@HVACRSurvival 4 ай бұрын

It was three hours prior. It took about 5-6 hours to edit.

@gabesreef 4 ай бұрын

The more you look, the more you find. Thanks for showing the importance of not finding 1 issue and walking away.

@jasonjohnsonHVAC 4 ай бұрын

My man Rick can polish a turd and make is shine like a diamond. It takes real skill to make something operate with difficult circumstances all while learning.....you are a true pro my friend.

@Neto-1984 4 ай бұрын

Man, they sure expect you to work miracles on a Saturday, and with that equipment. Also, like how you go from talking tech, to talking tools...nice touch.👍

@HVACRSurvival 4 ай бұрын

I got to earn my free tools. 🤣

@davidsanders6957 11 күн бұрын

Helper would have been really NICE !! 😂😂

@rugged1987 20 күн бұрын

Solid video hats off to you for having the confidence to work on such a hacked on rack system in front of us !

@davidsanders6957 11 күн бұрын

Cotactless contactor, peek-a-boo !!! 😅😅😅 ❤❤

@jaymartin5095 2 ай бұрын

Rick, I am amazed by so many things in this video. You saying you are a learner. Keeping your head in the midst of unending chaos. Doing your best while trying to keep their overtime charges down for them. Then simultaneously explaining to all of us what you are doing every step of the way. You the man. Thank you.

@HVACRSurvival 2 ай бұрын

You’re too kind Jay! Thank you sir!

@sterlingarcher46 4 ай бұрын

Working on chillers , the meer idea of reusing oil makes your skin crawl , but the funny thing is , if I was working on this type of equipment, especially in that state , I'd 100% be doin the same !😅

@HVACRSurvival 4 ай бұрын

Yeah, it was one of those holding my beer and I’ll go get another case off the shelf moments. 😭😂

@davidsanders6957 11 күн бұрын

Some times it PAYS TO HAVE A HELPER/ TRAINING guy on board.

@woodmasterguy 4 ай бұрын

Dig the grocery videos. Excellent work as usual, thanks.

@timothysambolin5293 4 ай бұрын

You are a master at your craft,I’ve been doing racks for about 4 years Thank you for sharing Your hvac videos r great too

@HVACRSurvival 4 ай бұрын

Thanks Tim! It’s a learning experience for sure 👍

@theangrytechnician6649 3 ай бұрын

Thanks for sharing Rick. Also, I watched till the end. 😂

@HVACRSurvival 3 ай бұрын

I appreciate that

@seanmichael8202 Ай бұрын

In my market days, the comment you made about being frustrated with garbage equipment is an understatement… The only benefit to that type of equipment is the opportunity to learn. Your videos are among the best 🤙 You’re a beast of a tech.

@HVACRSurvival Ай бұрын

I really appreciate your kind words! Thanks man!

@seanmichael8202 Ай бұрын

@@HVACRSurvival We all appreciate your real-time wisdom, my dude 🫡

@FrozenHaxor 4 ай бұрын

That equipment looks like it remembers civil war.

@HVACRSurvival 4 ай бұрын

Probably revolutionary war.

@FrozenHaxor 4 ай бұрын

@@HVACRSurvival😂🤣 💯

@Stacilynh 3 ай бұрын

Never a good way to keep oil off everything. I'm definitely getting that form a funnel. I'd usually grab a foil baking pan off the shelf, have the store buy it, and form something up but still oil ends up all over. Nice work.

@HVACRSurvival 3 ай бұрын

Thank you!

@subcoolHVAC 4 ай бұрын

Video was great, Thanks for sharing. Endless supply of work with refrigeration . Hopefully the rest of the weekend wasn’t too crazy 😎

@HVACRSurvival 4 ай бұрын

Sunday was quiet, luckily

@joeyf504327 4 ай бұрын

Looks like it would be benefit to keep several gallons of oil at each site your company maintains.

@MikeF1189 4 ай бұрын

I guess the last tech went crazy vandalizing everything with a blue paint pen.

@HVACRSurvival 4 ай бұрын

Yeah 🤣… That’s me

@adamdnewman 4 ай бұрын

Head banger for sure 😲

@terrytugwood7848 3 ай бұрын

Great work and video Rick , think you’re being too hard on yourself, most guys would fix one fault and walk away.

@HVACRSurvival 3 ай бұрын

Thanks man!

@TheGhettoLobster 4 ай бұрын

"Pulled a vacuum" 😂 Great video. I love watching you work on old CPC stuff and old racks. Can't say the same for working on em. Not a fan of the new E3's.

@HVACRSurvival 4 ай бұрын

E3 is about the same just more of a pain in the ass to log into

@gekkedirkie 4 ай бұрын

one big dumpsterfire. always the Saturdays and Sundays

@henningquast8456 4 ай бұрын

I like the longer, in depth videos.

@bryantpheanious7286 4 ай бұрын

I feel your pain. I too work on some sad racks lol.

@stephenbullock-yn3vh 4 ай бұрын

You do great videos.I appreciate that you go in depth how things work.keep those videos coming.👍

@HVACRSurvival 4 ай бұрын

Thank you!

@YuShudNoe 4 ай бұрын

Lol I was stressing out the first 5 minutes of this ! 😂 I’m sticking with Light Commercial Refrigeration but anybody who does this has my respect ! 🫡

@HVACRSurvival 4 ай бұрын

The stress goes away after you start getting comfortable with it. If you ever get board look into the racks, I like it even though it might not sound like it at times

@Troy11194 3 ай бұрын

As a fitter of four years on refrigeration install that got thrown to the wolves last year with rack service work longer videos are great. Appreciate all the effort you put into making the videos. I like the longer videos with the deeper explanation

@HVACRSurvival 3 ай бұрын

Very cool! I definitely have to continue reading and researching to become my best but I like doing it most of the time 😁

@roqueherrera8471 4 ай бұрын

Bruh I watch this more then TV keep bringing them HERMANO

@HVACRSurvival 4 ай бұрын

Awesome thank you

@owenflower5808 4 ай бұрын

Love the videos on the racks!

@richardbartlett6932 4 ай бұрын

Good spot on the contactor giving the oil trip. Watching you on this pack makes me feel great i retired a year ago. 😂

@HVACRSurvival 4 ай бұрын

Thank you! I hear that often, this is a occupation that never really leaves you.

@jimmyp5487 3 ай бұрын

Nice repairs dude … that’s damn near how every SM out here in mid Atlantic region is Can get some toe tags and tag your repairs. Usually what I do instead of marking everywhere

@HVACRSurvival 3 ай бұрын

Thanks Jimmy. I think tags are great inside of cabinets and places that will need updated information.

@chucklake443 4 ай бұрын

Your knowledge is very much appreciated. 👍👍

@HVACRSurvival 4 ай бұрын

I appreciate that!

@thesilentonevictor 4 ай бұрын

Rick saves the day experience at its best

@dimitrikottos625 4 ай бұрын

You can’t make chicken salad out of chicken shit. You’re a fantastic tech. Keep it up my man!

@HVACRSurvival 4 ай бұрын

You’re too kind! Thanks man!

@natsaichigwada6104 4 ай бұрын

Lol u gotta love supermarket refrigeration. You whole body is a tool. Hands on pipes and ears for hissing sounds. First time I seen on Orange Kysor Warren Rack. Reminds me of old Hill Parasystem

@alansotelo6472 4 ай бұрын

God bless you brother

@LilyRoseElectric 4 ай бұрын

Amazing 👏 craftsmanship 💯 percent...Great job

@HVACRSurvival 4 ай бұрын

I appreciate the support!

@DelbertQuentin 4 ай бұрын

You can always check the receiver level with a map gas torch on the side of the receiver. Apply some heat then use your finger starting at the bottom of the receiver and when you get from a cooler spot to the hot spot on the side of the vessel, that will be your receiver level. Works every time and is more reliable than any receiver level gage. From an old-timer supermarket refrigeration tech.

@HVACRSurvival 4 ай бұрын

Last time I tried that it didn’t work. I might have to try it again. I can get it to work on small receivers but haven’t had luck on these.

@garrycarnell1395 4 ай бұрын

Yes it works you just need to apply a little more heat to large liquid receivers

@HVACRSurvival 4 ай бұрын

Then I I’ll try it again with more heat. 👍👍

@MrShagCarpet 4 ай бұрын

I love this channel....

@HVACRSurvival 4 ай бұрын

Awesome. Thank you!

@frankmontefusco6016 4 ай бұрын

Thanks for your videos love them!!

@kingwookie7210 4 ай бұрын

Great work, as always, Rick!! I referred your channel to my service manager and co workers

@HVACRSurvival 4 ай бұрын

Awesome, thank you!🙏

@dynastyclimatecontrolinc.9462 4 ай бұрын

great content, thank you

@HVACRSurvival 4 ай бұрын

🤜🤛👍👍

@Bruce19 4 ай бұрын

Appreciate sharing your mad skills, even tho you only been working on racks for a couple of years.

@HVACRSurvival 4 ай бұрын

🤜🤛👍👍🙏

@RSBot2jar 4 ай бұрын

Good stuff! I love these longer videos, thanks for sharing!

@HVACRSurvival 4 ай бұрын

Glad you like them! 👍👍

@CajunReaper95 4 ай бұрын

I have that exact same multitool I love the swappable blade/file setup!

@arish00 4 ай бұрын

Rick, you are very good at your job and I've been subscribed to your channel for quite some time and have watched a lot of your videos all the way through!! Thank you for taking the time and effort to make these great videos, keep up the good work!!

@HVACRSurvival 4 ай бұрын

Thank you very much. I really appreciate hearing that!

@arish00 4 ай бұрын

@HVACRSurvival Yes sir you're welcome!!! I'm a HVAC Technician at the local college in my neighboring city and see the very familiar issues and interesting things and sometimes mundane things in the HVACR World, I can appreciate your labor and work you put into all this!!!

@arish00 4 ай бұрын

@@HVACRSurvival I'm curious, how often do you run or check analytics on your KZfaq videos? I think it's pretty neat that it can be checked to see how well your channel is doing overall!!

@HVACRSurvival 4 ай бұрын

@@arish00 I usually watch it right after release or shortly after then a day or two later.

@EverythingHVACR 4 ай бұрын

Nice job, Rick! There's a lot going on here, and as usual, you handled it well.

@HVACRSurvival 4 ай бұрын

Thanks Steve’O 🤜🤛👍👍

@FPHA697 4 ай бұрын

Great video brother! I really dig that funnel gonna have to get one. I usually grab a deep turkey pan off our shelves to drain oil in works great.

@thomweg6468 4 ай бұрын

Good Job stuff like this always happens on saturdays 😪

@walkingfreak 4 ай бұрын

It amazes me at how well you muddle through these calls especially on OT. That had to of been a 4-6 hour call easily I'd presume.

@HVACRSurvival 4 ай бұрын

Thank you! Yes I believe it was 7 plus drive time.

@danpresson 4 ай бұрын

I enjoy all your video from beginning to end I had to stop doing hvac but learn alot from you

@HVACRSurvival 4 ай бұрын

I’m sorry to hear that. You either love it or hate it for sure 👍

@stevenpollock6342 4 ай бұрын

I was amazed what u did already and to get this on a Saturday callout I leave the van on site and get an uber

@roqueherrera8471 4 ай бұрын

Ima win the CA lotto and go work there

@duaneimlay5680 4 ай бұрын

Good video

@HVACRSurvival 4 ай бұрын

Thanks for the feedback!

@joeshearer1247 4 ай бұрын

Nice work man working on the sabbath

@HVACRSurvival 4 ай бұрын

Yeah technically it was Saturday but I’m only 3% 🤣🫶 so it kinda wasn’t really 🤫

@helmsajr 4 ай бұрын

Great job Rick a real rat nest. Thanks for the great videos.

@HVACRSurvival 4 ай бұрын

Thanks for watching it!

@flyinghigh5531 4 ай бұрын

Great video and thanks for the content. This is the type of rack I’ve learned on, and is beat down also. Never ending work at these places. Good luck out there!

@HVACRSurvival 4 ай бұрын

Thank you! 🙏

@johnwalker890 4 ай бұрын

Good job Rick.

@HVACRSurvival 4 ай бұрын

Thanks John!

@marvinsellers4457 4 ай бұрын

My I really enjoyed watching you and your process in working it out you Rock

@HVACRSurvival 4 ай бұрын

Thank you! 🙏

@nottoday2118 4 ай бұрын

Awesome video! Keep them coming, I hate that I've just now found them, lol. Thanks again for the 8% at TTT.

@nottoday2118 4 ай бұрын

Also, I think you could be Jerry Seinfelds twin. 😅 I don't think it's just me that thinks that.

@wd8557 4 ай бұрын

I know I guy from Trane he has 36 years. He is their top absorber chiller guy. I asked him how long did it take you, to where you were like I got this shit down. He said 13 years, my jaw dropped.

@HVACRSurvival 4 ай бұрын

Yep. It’s a slow journey at times.

@hvacrnortheastern2110 4 ай бұрын

Great video this reminds me of some service calls that l had nightmare calls I don’t miss working on racks essential on remodels that your not involved.

@HVACRSurvival 4 ай бұрын

Right on 👍 🤣

@eunachooo 4 ай бұрын

you can always pump down the rack and torch the receiver

@HVACRSurvival 4 ай бұрын

It doesn’t work the same way as a smaller system. That system never pumps down and usually there’s too much heat on the receiver to see the difference with even my imager. I’ve tried

@eunachooo 4 ай бұрын

You might have more issues. It should pump down just like a normal system if you shut the liquid line after the drier or at each circuits. Usually i wait a lil and torch it and you can feel where the liquid ends with your finger. Then open the liquid line at 10-15% every few seconds

@HVACRSurvival 4 ай бұрын

Yeah, but I need to be 15 to 20% while it’s running not when it’s pumped down that’s what’s harder because this system doesn’t pump down it’s just constantly regulating suction saturated pressure

@eunachooo 4 ай бұрын

@@HVACRSurvival 80%ish while pumped down is ~20%. Let the comps shut off on their own and then manually turn them on off the e2 for about 5 minutes should do the trick

@travismaier4567 4 ай бұрын

Would gladly take a vacation to work with you for a week. Just to get some of your knowledge.

@HVACRSurvival 4 ай бұрын

Thanks Travis! I appreciate your kind words. Some days are boring and others are like this. It’s hit and miss at times.

@Reefertech 4 ай бұрын

That’s some old CPC controls. Crazy to see it’s still being used.

@HVACRSurvival 4 ай бұрын

I think this might be the last of these old CPC controls. We’ve had a lot of calls here over the last year is what got them up update the controllers.

@darcybowyer5743 4 ай бұрын

Holy hell that was one burned contactor! Never seen one so bad before.

@HVACRSurvival 4 ай бұрын

Now that I think of it, I haven’t either. I should have kept it

@AVR-hf1rl 4 ай бұрын

With all you did now I have a headache Good job

@HVACRSurvival 4 ай бұрын

😂👍👍 me too

@sterlingarcher46 4 ай бұрын

What else would you wanna be doin on a Saturday mate ? And you're gettin free oil fragance as well 😄 Awesome video Rick , i can only imagine how much work it must be on the computer on top of the tools !

@HVACRSurvival 4 ай бұрын

I literally had probably five hours six hours, editing, uploading and making a thumbnail. The whole call maybe took 7 hours plus drive time.

@fanionrocksgames6586 4 ай бұрын

I just graduated HVACR training, and this looks intimidating as hell

@HVACRSurvival 4 ай бұрын

If you just started everything can look that way. It’s going to take time, especially if you don’t do something everyday. But if you put your energy into building your skills you can become the expert and get paid like it. I wish you all the best! Go get it 👍👍

@fanionrocksgames6586 4 ай бұрын

@HVACRSurvival wise words brother, been in there for just under 2yrs. They told me sky is the limit also. They said it takes about 5yrs apprenticeship for journeyman. I was hoping my 2yrs counted but, apparently it doesn't. I have the Uni EPA, Osha 30, H.E.A.T., R410a Certified and Basic Electrical. Out of all of these certs I'm assuming EPA is most important? Also I'm a big dude like 6'5 300lbs, pretty solid but big. Do you recommend doing residential first or try to get into a commercial gig?

@HVACRSurvival 3 ай бұрын

I’ve seen people start in either division. It really depends what you want. I personally have always wanted to be better than average and to know more than most. I believe the more you know the more you’re worth. That’s not to sound arrogant it’s just my thoughts. Generally, everyone starts in residential but not everybody starts in Commercial, you’re gonna love one and hate the other or both like I do but I prefer the commercial over the residential just because it’s more rewarding to me but Refrigeration is also a whole another third division to learn.

@fanionrocksgames6586 3 ай бұрын

@HVACRSurvival I completely agree, I did some residence recently and I swear it was like unable to get in. I try to fix all I can outside or around lol even on roof. I trained in refrigeration, I felt I'm pretty good at it

@ryanisaacson118 4 ай бұрын

I watch you at 2x speed so im good for a 6 hr usefull video which u normally r

@HVACRSurvival 4 ай бұрын

😂👍👍 That’s crazy,

@dealinwithit1 Сағат бұрын

Subscribed good vids

@HVACRSurvival 41 минут бұрын

Thank you! I try to make them as useful as can be expected while still getting the job finished.

@watermanone7567 4 ай бұрын

Seems to me that the store is losing most of their profits in the repairs needed to keep the systems running? Their electric bills must be huge. Thanks for a great video.

@HVACRSurvival 4 ай бұрын

They own a lot of them, we recommend PM work but they don’t do it. 🤷‍♂️

@CajunReaper95 4 ай бұрын

Idk if it’s me but they look like small engines compared to the normal compressors I’ve saw on these types of videos!

@HVACRSurvival 4 ай бұрын

Yeah, they look like small little car engines. Technically they’re 20 and 25 horse. Sometimes the little ones were like 14.

@CajunReaper95 4 ай бұрын

@@HVACRSurvival nice!

@zekenzy6486 4 ай бұрын

Great Video. Thank you for sharing. May I ask, what is name of oil for compressor ? How long have to change oil for compressor ?

@HVACRSurvival 4 ай бұрын

That was Copeland Ultra 323MAF POE cil

@seangivens2770 4 ай бұрын

what a mess

@Eddy63 4 ай бұрын

Good vid & good content ... And we appreciate the effort you put into these ... Hey to Chronic ... Thx

@eunachooo 4 ай бұрын

at 4:44 board doesnt have a comm or power going to it

@ryanellinger103 4 ай бұрын

It’s e2e with the site supervisor touch screen. Why? Just go E3 and give the store the ip and if there computer is hooked up to the store network no need for the screen

@HVACRSurvival 4 ай бұрын

They did that to keep it very simple. Most people barely understand the basics of temperature let alone networking and the stock people will be able to read it without needing computer access. Times prior they used to just have a buzzer on the wall with a light that flashed at least now they’ll be able to see what zones actually acting up. I spoke with the other group that is doing the controls and they will be back in 2-3 weeks to finally finish. They had another remodel that they were stuck finishing before returning on this one. This was the only store they had. It wasn’t on any type of control system. All the other stores used to have com-troll and those got updated to Emerson.

@LC-qi5ff 4 ай бұрын

When it the oil switch trips is it because the oil is hot or because oil level is low?

@HVACRSurvival 4 ай бұрын

It trips because the oil pressure differential is too low.

@stevenharrison7052 4 ай бұрын

Could you pull the compressor into a vacuum and use that to pull the oil into it rather than having to pump it in?

@HVACRSurvival 4 ай бұрын

You could but what are you gonna do about the moisture and air you pull in to it? You’ll still need to evacuate the compressor. The pumps actually pretty quick.

@stevenharrison7052 4 ай бұрын

@@HVACRSurvival I would figure you have to pull the compressor down anyway, once you pull your oil in you let it pull until you’re below 500, Never worked on a rack system just spit balling. keep up the good work always enjoy your videos

@Boodieman72 4 ай бұрын

Why has it been months but the equipment is still not installed?

@HVACRSurvival 4 ай бұрын

They had another remodel at another store that took priority over this store. The company doing the controls is owned by the grocery.

@steveblake8766 4 ай бұрын

927 thumbs up

@zack9912000 4 ай бұрын

It looks like that store has needed an over hall and they are too cheap or too broke to afford it

@HVACRSurvival 4 ай бұрын

They have nicer stores but this one is in a small country town that likely doesn’t pull in the revenue the other stores are.

@Boraxo 4 ай бұрын

Morning Rick, how old is this monster ?

@HVACRSurvival 4 ай бұрын

I would guess the mid 1985-90? The cases are likely older

@CM-ou4zr 4 ай бұрын

It doesn't seem like you are just complaining, there are legitimate issues that should have already been addressed that make diagnosis more difficult. This means longer calls and more potential for misdiagnosis.

@HVACRSurvival 4 ай бұрын

Thank you, there is a lot of different people involved in these stores

@user-cz8do7xl8u Ай бұрын

Hold the phone, you mean you don't need to turn service work into a laboratory environment and a science experiment? Free, re, reuse air exposed oil!?!? 😮

@HVACRSurvival Ай бұрын

Can you better explain your question?