Overpressurizing Hydraulic Hoses Until They Explode!

Рет қаралды 347,818

24 күн бұрын

In this eye-opening work safety demonstration, we use a 300-ton hydraulic press to simulate the devastating effects of hydraulic hose failures. Captured in stunning detail with a high-speed camera at 2000 frames per second.
We test 5 different hoses from water hose, to air hose all the way up to heavy duty hydraulic hose / hydraulic line. Don't try this at home! Exploding hoses can send flying parts or cause a injection injury
Injection injuries are a serious workplace hazard caused by high-pressure equipment accidentally penetrating the skin and injecting foreign materials into the body. Consequences of injection injuries include tissue damage, infection, and even limb amputation if not treated promptly. Observe the damaging effects oil and paint can have on the tissue and learn about the importance of seeking immediate medical help in case of an injection injury.
If you are interested testing something dangerous out please feel free to reach out to us and let's talk! For contact information go check out our websites www.hydraulicpresschannel.fi
You can now buy your own hydraulic press through us! Press inquiries hpc@profipress.info
Here is the link where you can check out standard Profi Press models rhtc-workshoppress.com/ and if you need special custom made machine just send email and Profi Press engineers will design machine that suits your needs.
Our second channel / @beyondthepress
Our fan shop www.printmotor.com/hydraulicp...
/ officialhpc / hydraulicpresschannel
Do not try this at home!! or at any where else!!
Music Thor's Hammer-Ethan Meixell

Пікірлер: 1 200

@wanhapatu 22 күн бұрын

Ribbed hose - for your viewing pleasure.

@stu9stu9stu 22 күн бұрын

Eeeeew

@71janas 22 күн бұрын

😂😂😂

@koriw1701 22 күн бұрын

😂😂😂

@markedis5902 22 күн бұрын

And it gets longer before it blows

@josephvanbrunning2960 22 күн бұрын

Busted!

@JamieStuff 22 күн бұрын

Kudos to whoever made those hoses. Not a single crimp failure!

@ncsupi 22 күн бұрын

Seriously!

@jguth6 21 күн бұрын

There should never be? It's not kudos. It's just correctly swaged.

@carwashadamcooper1538 21 күн бұрын

@jguth6 that's the point! Nowadays, it's hard to find anyone who does their job correctly. Especially repeatedly...

@nathanielwildebuer6405 19 күн бұрын

Ya... I do general handyman work. Twice in the past few months I've seen simple water supply lines (for kitchen sinks) fail at the crimp. Not a catastrophic failure like in video but enough to spray me in the face😮. The hoses were the same brand bought at the same time. (I keep extra lines in my truck). So I am guessing that there was something going wrong during manufacturing.

@matbr6949 18 күн бұрын

I work at a hydraulic hose factory and definitely take pride in what we do. Thanks for the kind words 😊

@95dodgev10 22 күн бұрын

It's morning time here so a video about stretched hoses seems fitting

@s.n.8128 22 күн бұрын

Lol! :D

@techn1kal1ty 22 күн бұрын

hahaha

@kimjong-un5074 22 күн бұрын

Pervers

@rs2143 22 күн бұрын

Wakee wakee hands off snakee 🐍 😮😅😊❤

@krissylee524 22 күн бұрын

Morning hydraulic wood

@davepost7675 22 күн бұрын

"Failure today is our goal". Sounds like something that should be on merch.

@jamesa7506 22 күн бұрын

Or our current administration's campaign slogan.

@worldsstrongestblacksmith 22 күн бұрын

Perfect for a gym T-shirt

@ColKorn1965 21 күн бұрын

Ford's motto

@Hoaxer51 21 күн бұрын

@@ColKorn1965, Or Boeing’s!

@josephdoiron8376 21 күн бұрын

This type of testing is called destructive testing. I work on aircraft and we do non destructive testing. Called NDT for short. That encompasses visual insp, Eddy current insp, x-ray insp, magnetic particle insp, dye penetrant insp. I'm sure there are more. That's all I got

@c-man6376 22 күн бұрын

I know a guy who almost died from hydraulic injection, and unfortunately most people I've been around think it's a myth. Glad you are showing in the ballistic gel how it happens to educate folks and show its no joke

@DinoNucci 22 күн бұрын

That was ur m o m

@Colorado_Native 20 күн бұрын

We had a guy in the USAF who thought he could check for a bad hydraulic hose on an aircraft with his bare hand instead of using the proper way. He severely injured two fingers (nearly cut them off).

@remb9614 20 күн бұрын

@@Colorado_Nativethat stuff is no joke! I know a guy who had his finger nearly cut off by high pressure lines. Cut clean to the bone! It looked like a chicken wing after someone ate it. They had to amputate and treat for infection. Surprised there wasn’t much blood and he wasn’t in much pain until later. I’ll never forget that sight.

@bigginger6753 20 күн бұрын

Apache ran at over 4,000 psi on auxiliary hydraulic pressure. We didn’t risk anything around that

@robertwest3093 18 күн бұрын

Myth my a$$! Anything under pressure is something NOT to fool with.

@HydraulicPressChannel 23 күн бұрын

Does your company need something stupidly dangerous to be tested out and filmed? We surely can get it done in our bullet proof bunker or at our explosion park! 8 years of doing stupid stuff professionally gives us unmatched experience on getting things done no matter how dangerous they are. For more information go check out our webpages hydraulicpresschannel.fi/

@WoodworkerDon 22 күн бұрын

I am the stupidly dangerous thing at my company. Should I be tested and filmed? 🤔

@nox_luna 22 күн бұрын

@@WoodworkerDon lmfao

@koriw1701 22 күн бұрын

The site looks great! Hanna, you look beautiful in the picture. I'll bet Lauri is glad to have you 'for billing and practical matters.' 🫳🎤

@bill4639 22 күн бұрын

I was just going to suggest you make a piston for a water jet cutter. We live in a simulation. This is great data for anyone wanting to build their own water jet cutter.

@HydraulicPressChannel 22 күн бұрын

@@koriw1701 I am really pleased on Hannas efforts

@gediminaskalinauskas8044 22 күн бұрын

Worked at a heavy machinery shipping company in the past, having to disassemble cranes, excavators, combines all the like was a dangerous business. After I left a few months later an old co worker told me one of the guys was removing a hydraulic pressure line off a big CAT excavator boomstick without purging out the fluid first. The threads on the fittings stripped off from the sheer pressure, hit him on the head and killed him before he even hit the ground from a 26ft fall. Channels and companies like this are MUST to educate others about dangers and safety on this kind of stuff. High pressure hydraulic is no joke

@Carson-to4zr 22 күн бұрын

As someone who has spent years making hydraulic hose assemblies, this video is awesome! Thank you for demonstrating the strength of these hoses.

@chrisharding2813 21 күн бұрын

At this point when you see an "as a" comment you just throw up in the toilet until the sickness passes.

@TheLaensman 22 күн бұрын

“The best, most badass Finnish hose money can buy sprays all over the walls” -Presshub

@JoeJ-8282 22 күн бұрын

Hahaha, good one! 😂

@nvmnvm8821 22 күн бұрын

u should have wrote HOSE otherwise perfect comment 9/10

@Colorado_Native 20 күн бұрын

Are you saying it was 'Finnished' when the test was over?

@nvmnvm8821 20 күн бұрын

@@Colorado_Native stahp

@tfrowlett8752 22 күн бұрын

I often use these hoses with high pressure tanks. Good to know the ratings hold up

@2212db 22 күн бұрын

I love the safety notices - "Not to be operated by f*ckwits" 🤣

@ryanjohnson3615 22 күн бұрын

I'm pretty sure those are from the "AvE" channel collection. Well placed here...

@tetchypoo 22 күн бұрын

I’ve got some of those stickers, can confirm it’s AvE

@brandonobaza8610 22 күн бұрын

"Do Not Dumb Here. No Dumb Area" and "Engage Safety Squint" 😁

@CouldbeUrDad 16 сағат бұрын

I approve of the safety squint as a redneck.

@musFuzZ 8 сағат бұрын

"Don't stick your fingie where you don't stick your dinkie"

@DelfinoGarza77 21 күн бұрын

Everything that lady says is gold.

@ArchangelExile 22 күн бұрын

6:21 "I see a lot of really stupid comments in this video." 🤣🤣

@jwalster9412 22 күн бұрын

He wasn't wrong.

@Omrifere 22 күн бұрын

Making the hose nice and firm before it squirts all over the place. This is the kind of quality content I keep coming back for.

@cloudpandarism2627 22 күн бұрын

love how he also says you dont wanna get any of the stuff injected into your body. better be safe! good for him 🌬💧

@dannydaw59 22 күн бұрын

They sure gave us the money shot.😂

@cloudpandarism2627 21 күн бұрын

@@dannydaw59 how can we blame him? i also think the new girl needs to be careful not to catch a cold. those nipplez are like diamonds. ooooor maybe she is just happy to see us all here. 🫶🏻

@LakeNipissing 22 күн бұрын

*_"The only option is failure."_* Brilliant.

@pedrodepacas-ic1cb 22 күн бұрын

"Failure is always an option." -Adam Savage

@ja-bv3lq 22 күн бұрын

Hannah is so terribly cute. We need more of her!😊

@feelinghealingfrequences7179 22 күн бұрын

certified MILF

@kingcosworth2643 21 күн бұрын

She's a Finnish spunk

@kbeightyseven1783 21 күн бұрын

Hanna is looking hot

@Varhaisperuna 21 күн бұрын

Her name is Hanna, not Hannah...

@lawrenceczaplicki541 11 күн бұрын

Beautiful breasts.

@bobsonmkd 22 күн бұрын

Wohoo, now this is interesting, i work for Vitillo and to be honest i never expected that ill see our product on this channel. Fun times.

@davidblalock9945 22 күн бұрын

When it comes to listing the failure ratings of things, a company tests their product to failure 100 times, and 84 times out of those 100 tests showed it failed at such, 15 times it failed below that, and 1 times it way out performed the average, they’re going to set the failure rating based on the worst performance of the 15%. Because anything below that is very unlikely.

@DinoNucci 22 күн бұрын

Can you rewrite in English

@trg3625 21 күн бұрын

@@DinoNucciThey’re saying that when it comes to safety, companies will fail-test their products and mark the worst result as the standard, as it is unlikely something performs worse than that.

@GiJoe94 11 күн бұрын

@@DinoNucciIt's a very simple concept

@olafthebear2327 22 күн бұрын

Safety stickers are doing some heavy lifting upkeeping the safety at the work site Some translations of them: "No fishing stories allowed", "Beware of skiers", "Beware of children playing", and "No boating allowed"

@lauxmyth 22 күн бұрын

Many years ago, I was getting a H&S newsletter from the province. Each issue listed workers killed in the last 6 months. One was a worker who had a hydraulic hose fail and it whipped about and injected about 1.5 litres of HOT fluid into his abdominal cavity. They indicated he suffered burns and took a full day before death. I keep thinking this was a long very bad way to die.

@koriw1701 22 күн бұрын

Thanks for the visual. And I am just getting ready for bed too! 😳😳😵‍💫

@AffordBindEquipment 22 күн бұрын

The lesson in this is to become an accountant.

@ITubeTooInc 18 күн бұрын

@@AffordBindEquipment No, you can get paper cuts as an accountant...

@AffordBindEquipment 15 күн бұрын

@@ITubeTooInc You are so right and they hurt. But they won't cut you in half or glove your had.

@th0master 22 күн бұрын

I just realized, you have a 3rd person holding the camera!!

@WoodworkerDon 22 күн бұрын

TET student (like an intern) earning school credits for "real-world" work experiences.

@Nefville 22 күн бұрын

I'm just here to thank the piston seals. PS thanks for getting it over the speed of sound, I was asking if that was possible on the last video and well with the Profi, it is. That thing is a beast.

@jrm15082 21 күн бұрын

if you watch the last high speed it appears a little squirt made it out the top, and the plug on the bottom started leaked right before the hose failed.

@stavinaircaeruleum2275 16 күн бұрын

I don't have any seals; would a piston walruse suffice?

@christianhunt7382 18 күн бұрын

I absolutely love the googly eyes on all of the pressure tests.

@phonotical 22 күн бұрын

The last time there were this many explosions in a bunker, it was the 1940s 👀

@vihreelinja4743 22 күн бұрын

Yesterday in ukranistan.

@verdatum 22 күн бұрын

Good topic idea. I often wonder about this.

@Sparky_D 22 күн бұрын

I love the face on the end of the hose 😂

@WoodworkerDon 22 күн бұрын

👀

@ColinWatters 20 күн бұрын

12:35 It even looked surprised when it blew.

@3RR0RNULL 22 күн бұрын

This channel is so great. There are so many reasons. It’s educational, it has the potential to expose potential safety issues (such as a hydraulic hose failing at much less than it’s rated failure pressure), and it’s incredibly entertaining.

@michaellombard894 22 күн бұрын

Awesome, thank you for these fantastic pressure demonstrations!

@robertsmith4681 22 күн бұрын

This one is interesting, I have often heard and been told of how dangerous hydraulic hoses could be when they burst but I have never seen such a demonstration performed, well done.

@couchbear6108 22 күн бұрын

Watching your channel is a great way to decompress

@koriw1701 22 күн бұрын

"Decompress with the hydraulic press!" I'm posting this for Lauri to see! Lol! Thanks for the idea!

@stewm1267 12 күн бұрын

Well played. 9.2/10

@bobfels5343 21 күн бұрын

Hannah is on fire this video, your remarks made me laugh so hard :P

@coolmig27 22 күн бұрын

You earned a new title: Hose Killers

@coryernewein 20 күн бұрын

The water escaping around the bolt facing forward on the last test is mind blowing🤯

@WoodworkerDon 22 күн бұрын

"The only option is failure." The Anti-NASA motto. 👌

@HydraulicPressChannel 22 күн бұрын

We have different rules here 😀

@pete5405 22 күн бұрын

True Boeing motto :D

@danglecier9462 22 күн бұрын

Need Tee shirt! Only option is failure HPC.

@TheCorpsehatch 22 күн бұрын

SpaceX: "We make things fail to insure quality in the future."

@garymcdonald6529 22 күн бұрын

Excellent video!

@annalangley9877 22 күн бұрын

That was really fun and interesting! Thank you, Lauri and Hannah!

@yutub561 22 күн бұрын

Im a hose engineer for kne of the largest industrial fluid system component suppliers in the world (our products werent in your video) but these tests are what i do at work!

@Fix_It_Again_Tony 21 күн бұрын

He made a comment about expecting to exceed the rated burst pressure on one of the hoses. How accurate is the burst pressure rating? Does it tend to vary between lots of hose, or is it consistent?

@yutub561 21 күн бұрын

@@Fix_It_Again_Tony ours have a 4 to 1 safety factor so they shouldn't burst anywhere under 4x the rated pressure. It can vary above that though. Ex. a hose rated to 1000 psi can burst at 4000 or even 8000, but depending on the statistics (standard deviation and appropriate sampling and all that - stats is not my forte I let other people do that part) we rate according to the burst data stats

@Fix_It_Again_Tony 21 күн бұрын

@@yutub561 I think I understand. Burst pressure requirement is min 4x rated pressure, but the actual burst pressure specification for a given hose is based on test data, not just 4x max rated pressure. Makes sense. Build in a healthy margin for safety, and then print the largest number on the hose that the data support.

@yutub561 21 күн бұрын

@@Fix_It_Again_Tony yessir. The rated pressure is determined by a statistical analysis of the actual lab tested burst pressures. At-Temperature testing is done as well. I explained it really poorly in my last comment haha

@axtrifonov 22 күн бұрын

New Finnish word unlocked: "ploog"

@joe125ful 22 күн бұрын

Whats that?:)

@madmodders 22 күн бұрын

@@joe125ful Plug. :) U is pronounced oo in finnish. That's also why he sometimes say boonker instead of bunker.

@joe125ful 22 күн бұрын

@@madmodders Ah yes i notice that now its kinda strange in english:)

@wanhapatu 22 күн бұрын

@@madmodders English with it's stupid pronunciation... We just pronounce things like they are written.

@madmodders 22 күн бұрын

@@joe125ful yeah, but it’s pretty good after learning english mostly by watching american movies. :D

@onsh 22 күн бұрын

Thanks for the biology lesson.

@togusa6693 22 күн бұрын

Can't believe I've been watching this channel for years and I hand't subscribed before. I love your content. Keep streching them hoses, blowing, collapsing and crushing things for all of our entertainent.

@kjm-ch7jc 22 күн бұрын

Nice to see the temperature is rising after the cold winter.

@Shoorit 22 күн бұрын

Hydraulic injection injuries are very serious injuries, although the initial injury seems minor like a small sting with a small hole in the skin. If left untreated it can cause compartment syndrome and even result in amputation or death depending on the fluid used. Very scary stuff and pictures of the injuries are not nice, I can still remember being shown all the pictures of the injuries when studying engineering.. I think we were being shown what could happen if careless or maybe it was part of a first aid I can’t quite remember, but the images stuck with me for life 😳

@Oldtanktapper 22 күн бұрын

Yup, and the processes for treatment are really, really gruesome. Always check for a suspected leak with a piece of cardboard, not your hand!

@mendozajoe40 22 күн бұрын

Love what you guys do,Testing hoses is a must in the industry

@zebulondudora 22 күн бұрын

Nice job, Flea!

@ZMAN_420 22 күн бұрын

I'm a mechanic I work with hydraulics alot. This was a great idea!👍🏻EDIT this was one of my favorite episodes!

@IstasPumaNevada 22 күн бұрын

I can see how it would be both slightly terrifying and also reassuring. :)

@ZMAN_420 22 күн бұрын

@@IstasPumaNevada I replace lots of hoses from them exploding and everyone tells stories about how dangerous it is when a hose or any hydraulic component fails. Sometimes our heads, limbs and body's are rite next to hydraulic hoses that are under pressure. After watching this, I will be more careful.

@depeltenburg6916 22 күн бұрын

What do u mean with stupid comments? No one will say something about a tube getting longer and hotter cause the pressure builds up and than ejaculating fluid. why would they 😂

@Jcs57 22 күн бұрын

I love the involuntary jump when the hose fails, you know failure is imminent but you cannot help but have a startled reaction.

@Lilith-Rose 22 күн бұрын

That black hose under pressure was like an excited horse

@jft1911 22 күн бұрын

And here we see a hydraulic press in it's native habitat performing a pre-mating ritual. As this is the young press's first mating season, he struggles to contain himself, and fails repeatedly.

@AE31011 22 күн бұрын

You're putting the pressure on very high. Now the next video should be even better. Please keep making these video's. 👍🏻👍🏻

@ChazzleDazzleVideos 22 күн бұрын

My grandparents were from Finland and I miss them and the way he speaks is just like my grandparents and it reminds me of them.

@Babalon48 20 күн бұрын

Love seeing all the upgrades this channel has seen

@kyleg8928 22 күн бұрын

Place a Gel block rested on top…simulate the damage of a catastrophic failure. Place some fabric/denim or a work glove between the test hose and the gel…..when you showed the gel block in the beginning, I was hoping you would have some facsimile at the end…now on to solid tube!. Also, I wonder if values would differ in a hoss 4 times as long? What about thread/fitting failure points with gel block….have a nice day!

@throttlebottle5906 22 күн бұрын

need to place them inside gel block or gel blocks surrounding them tightly, since there's no way to tell where it will blow apart.

@WoodworkerDon 22 күн бұрын

Humorous Safety Stickers will save humanity. 👍

@cybersmurfen 22 күн бұрын

Another great video. The best part are Hanna and her reaction with laugh and comments.

@jamesporterofficial 21 күн бұрын

Your videos always put me in a good mood, you both seem so sincere in your curiosity, wonder and amazement of the experiments.

@JoeJ-8282 22 күн бұрын

"That got quite BIG!" (THAT'S WHAT SHE SAID, LOL!)

@koriw1701 22 күн бұрын

I guess she should know, right?

@terraficionado 22 күн бұрын

I didn't realise this channel makes videos about erectile dysfunction.

@jurajvariny6034 22 күн бұрын

more like erectile hyperfunction

@masonhogan8525 22 күн бұрын

You two really know how to make a hose explode.

@Dur4m4x 5 күн бұрын

My new fave channel. I like how quickly you went through the selection of hoses and the fast-paced analysis of each one. You kept me glued. Cheers!

@ChazzleDazzleVideos 22 күн бұрын

"I see a lot of really stupid comments on this video." LOL you know it.

@MrDaveNZ10 22 күн бұрын

Maybe I missed a few videos, but omg Hanna is gorgeous!

@holdenbrougham1056 18 күн бұрын

Always enjoy watching these 2 fine people together and love ancient

@ZylonFPV 18 күн бұрын

I like the discussion at the start.. the HPC channel has the motto: “failure is the only option”

@th0master 22 күн бұрын

Maybe you could add a water pressure sensor to the setup, so we can see the exact water pressure

@HydraulicPressChannel 22 күн бұрын

Hard to find one that goes to high enough pressures. I just have 1000 bar one 😃

@quinn860 22 күн бұрын

Think a company called cejn might do them or allswage, they make hydraulic test rigs@HydraulicPressChannel

@mick-sk5lw 22 күн бұрын

@@HydraulicPressChannel you could make a 2 sided piston where one side has 4x the surface area to make a pressure divider, the gauge would show 1/4 actual pressure if its on the side with 4x surface area

@kingcosworth2643 21 күн бұрын

@@HydraulicPressChannel Can you get a common rail diesel pressure gauge

@rstoertz 21 күн бұрын

Next video ... pressure gauges exploding.

@scythelord 22 күн бұрын

The hoses were just getting excited.

@xxstepsxx4227 22 күн бұрын

The hose saw the all mighty press working hard! And the hose got excited

@davida1hiwaaynet 8 күн бұрын

Loved hearing the info on your own company. Very good line of work!

@Mr.clintontoney 22 күн бұрын

This video was better before the hoodie. 🤣🤣

@kingcosworth2643 21 күн бұрын

She's worth looking at

@Mr.clintontoney 21 күн бұрын

@@kingcosworth2643 definitely

@joshua_J 17 күн бұрын

I see exactly what you are saying here but they didn't want to test your load failure.

@Mr.clintontoney 17 күн бұрын

@@joshua_J 😂😂😂😂

@mrpeanut911 22 күн бұрын

So if you cap the head, and apply enough pressure, the hose gets longer and harder until there is a dramatic explosion? Does the hose return to its original size in less than four hours? These are the questions that need answered

@koriw1701 22 күн бұрын

Because if not, they should seek emergency medical services?

@kingcosworth2643 21 күн бұрын

4 HOURS!!!!!!

@johumm455 22 күн бұрын

very nice sound disgn!

@CarterSchonwald 22 күн бұрын

This is why this is one of my fave science / engineering education channels

@chadscatharsis3287 22 күн бұрын

Eyes on the press gentlemen!!

@SuperCoolTeenisGuy 22 күн бұрын

I typed no, looked back at the video, and there was a hoodie in the way☹️😂

@Sir_Leelord 22 күн бұрын

It'd be so cool to do a collab w/the slomo guys and recreate this video with them, or other ones too.

@Paul_SD 22 күн бұрын

I am not having the best of times just now - however, watching this video and both of your joy at doing stuff has really brightened up my day already - hwyl dda from Cymru 🏴󠁧󠁢󠁷󠁬󠁳󠁿

@MSivonen 22 күн бұрын

Fascinating. Usually in hydraulic videos in internet, under external pressure the hose gets smaller.

@mickeyfilmer5551 22 күн бұрын

Hannah has such a contagious giggle when she laughs at the Very Loud Bangs, that I find myself laughing too.!! Great Job keep going!!

@koriw1701 22 күн бұрын

I agree! It tickles me to hear her giggling in the background. (She has a big squeek at explosions~ it is cute too)

@eddiewillers1 22 күн бұрын

Lauri has upgraded over Anni, for sure.

@cancer_sucks 22 күн бұрын

@@eddiewillers1 thats a matter of perspective! they are both very beautiful women

@BIGSMOKE-bl2lq 22 күн бұрын

Did she make your hose grow too....@@koriw1701

@ihatelols 6 күн бұрын

@@eddiewillers1 100%, nice to see :D

@countryracer69 22 күн бұрын

Wet t-shirt contests made here by surprise. Book yours today.

@stalhandske9649 22 күн бұрын

There are some fractions of second before the rupture at 14:14-14:15 when one of the bolts in the cylinder starts to leak water. Just saying if you missed it Lauri. Apparently 1700 atmospheres is pressure enough for water to start swimming through the grooves.

@donaldevans5752 19 күн бұрын

so so interesting , brilliant video .

@polarbearsaysyummy5845 22 күн бұрын

The explosions, especially #3, are frightening. But also show just how safe properly used hydraulic hoses are. Would ❤ to see you team up with a fire department when they conduct overpressure tests on their hoses.

@koriw1701 22 күн бұрын

I second that motion!!! 🤚🤚🤚

@RoelofRichter 22 күн бұрын

Thats what she said!

@girenloland 22 күн бұрын

Happy to see you relief the hose pressure 😂

@unclerojelio6320 22 күн бұрын

My new motto, “The only option is failure”.

@JX02123 22 күн бұрын

"That was quite big!" -that's what she said! 10:39

@Sparky_D 22 күн бұрын

Having seen the aftermath of a co-workers finger which got a hydraulic oil injection... He was lucky not to lose the whole finger. It was nasty.

@magnulof 17 күн бұрын

Loved the clip!

@rc-daily 11 күн бұрын

Under pressure that guy stood straight up!!!😂😂😂

@sonjakavalut 22 күн бұрын

Nice Twins 🙋‍♀️

@squidikka 22 күн бұрын

11:40 When I'm edging but get a notification for a new HPC video upload.

@jeffryblackmon4846 17 күн бұрын

I worked with 50K psi water jet machines and understand the dangers of such high pressures too well. Thanks for the video.

@daastin1 22 күн бұрын

Wonderful stuff. Greetings from Australia.

@harborwolf22 22 күн бұрын

The hose got a good look at Hannah and couldn't keep it together... Damnnnnnn

@OllyO-gt8pg 22 күн бұрын

at 14:15mins notice the way the water leaking from the bolt headed towards the pipe just before it popped lol

@Fallen4242 22 күн бұрын

Yeah, looks like it was a slow leak that was riding the side of the cylinder because of the pressure. If you look at the slow motion, you can see it start small then start to come out like a stream from the bolt before the hose exploded. Teflon tape may have prevented that but not really needed.