Hydro gear - Disassemble & Fix Yourself !!

Hydro gear - Disassemble & Fix Yourself !! - Whats Inside?

Рет қаралды 18,987

What To Do Rob

Жыл бұрын

Rob takes apart a hydro gear from a Bobcat Zero Turn and explains exactly how it works and how you can fix it yourself.

Пікірлер: 70

@urienswolfeson3065 4 ай бұрын

Just discovered these videos. Outstanding tutorial. Being a small engine and equipment repair person, I get a lot of these that I have to send out to repair. This will eliminate that. Keep up the brilliant work.

@texasdillo 8 күн бұрын

Awesome tutorial video showing every detail and potential problems. Certainly will help me if I ever have to rebuild one of these hydro gears. I have three zero turn mowers and use them quite heavy during the warm mowing months. Thanks.

@jeremycopeland281 4 ай бұрын

By far, best hydro gear video. I appreciate the layman’s explanation as well as explaining everything in how it operates. I have some confidence now, to fix one or both of my hydro gear - leaks

@nickheslop9149 Жыл бұрын

Definitely the best video out there on hydro gears. Thank you for taking the time to go over every little detail and what can go wrong and what to look for.

@JohnSpringer-wr1qs 8 ай бұрын

Thanks for showing me how you take one apart, appreciate your time, your effort, and I'm glad someone like you takes the time to show other people what you can do to save money and cost. S and that's a lot of talk about these days. Thank you very much

@juanluciano401 Жыл бұрын

Great job in explaining, best teachers are the ones that do…just subbed…

@greggb1416 Жыл бұрын

Slightly late to viewing this video.., but it is excellently produced on all levels (video, audio, oral descriptions, in depth descriptions of and demonstrations)… Thank you sir.

@countrymadness9185 Жыл бұрын

This video made me feel a lot better on hydro gears. I thought they would be a lot more complicated than this.

@miketyler2513 7 ай бұрын

Take a bow MAESTRO! Thanks for your effort and time to do this.

@calebaskie4415 16 күн бұрын

Tks much my brother...Great teaching

@user-tz2hf7he9z Жыл бұрын

Great video. Thanks for the thorough explanations. I'll be cutting grass again in no time!

@GwinnettLawns 9 ай бұрын

Wow that pump is really simple! Never seen the inside of one. Great job!

@edwinhunter7934 Жыл бұрын

A great video, I’ve learned a lot about these Hydro’s. Thank you for your time.

@matthewmagee31 Ай бұрын

fantastic video brother

@chad9411 2 ай бұрын

Explained very well

@karlfrink5357 Жыл бұрын

Great video Rob! Very useful information, thank you for the step by step. I am having trouble with the same pump and will be using your advice to fix it! Look forward to your future vids!

@jockobacumbo623 Ай бұрын

Just liked and subscribed, great video, appreciate you making it. Have a 2004-5 Wright Stander with leaky pumps, might try for a reseal, the pumps are about $550 each. Thanks

@snsmowingservice998 Жыл бұрын

Very informative! I’m having trouble with left pump on my ferris z1 stand on mower. I will be checking into it in the morning!!! Thank you, I will keep you updated with my findings!

@josephmore7537 Жыл бұрын

Great video, very simple pump breakdown

@cutdifferentintl Ай бұрын

You're the man !

@billbraden4815 7 ай бұрын

Great video Rob

@artderamo8053 7 ай бұрын

Great video!!! You did a great job, thanks!!!

@covidfake1573 9 ай бұрын

Wow. Very informative. Thank you.

@kellyleecreech Жыл бұрын

Very helpful video!

@stevemyo8137 8 ай бұрын

Excellent video

@georgecook1374 8 ай бұрын

great vid as I just had one that crapped out. or the wheel motor did, nice to see these are fixable as long as it wasn't a catastropic failure. seeing a new pump is 500-600

@youtubestar 7 ай бұрын

They are certainly fixable for the most part as long as you catch the problem early and finding the parts can be a little bit challenging but they are out there sometimes you may have to get different parts from different suppliers as I have not seen a complete rebuild kit completely from one supply yet usually just different parts from different people but they are rebuildable and if you don't need a whole lot of parts it can definitely save you a lot of money by fixing it yourself they are not rocket science when you take them apart they are actually very simple as long as you remember how you took it apart and how it goes back together

@johnt.starkey6421 10 ай бұрын

Thanks for the video hope to repair my trans and this will do the job hope to save a good mower. thanks again.

@VictorRodriguez-sj2ff Жыл бұрын

Great info, thanks

@darylcain8547 Жыл бұрын

Great vide0!😊

@KhanhNguyen-tt1yj Жыл бұрын

Thank you very good for your Video

@jremeee1599 2 ай бұрын

I bought a used Husqvarna ZTR mower with hydro gear 3400’s. They are really loud. Kinda sounds like a car with no power steering fluid. They work fine they’re just noisy. Fluid is full and all.

@adamkinnaman6889 Жыл бұрын

Great video, man. think I'm about to pull the pump off my turf tiger 2. right side is weak af.

@12gageshot 2 ай бұрын

Very good

@barbaraepsaro2718 10 ай бұрын

thank you so much

@KennyTrussell 10 ай бұрын

Hi Rob. Your video has been invaluable to me. I am reassembling my pump now. I noticed there is what appears to be an alignment arrow on the bottom of the cylinder block. Is it supposed to go on the shaft a certain way? Thanks!

@billbraden4815 7 ай бұрын

I have a Scag Tiger Cat and the left pump is leaking hydraulic fluid and now there is no pressure to allow movement....was going to buy new pump but after watching your video,I have to see the inside to see what was wrong

@mdduran5824 Ай бұрын

or the seals for the idraulick pomp left side

@reddog6581 2 ай бұрын

Which nut/bolt do you slightly loosen to purge air out of once reassembled?

@tjtamisha7621 10 күн бұрын

How and or where do you order parts for these if needed? How do you find the part numbers? Do you have a website to find them?

@oldkicker8958 3 ай бұрын

Does the charge pump cover go on a certain direction? Thx!

@NathanFrye-tv2qp Жыл бұрын

I am having pump issues with my hydro gear brand pumps after low oil. I changed the oil and replaced a bad line. Now the wheels won’t move, and the mower will free roll even with bypass closed. I tried all the bleeding methods and have had no luck. Do these need to be pre filled after an oil change ?

@sonnyhiggins7425 Жыл бұрын

About to tear into the hydro on a Swisher ZMAX. Is there a place to but Swisher htdro parts? I haven't been able to find any online since it's an older zero turn mower.

@Scooter_cash 3 күн бұрын

What’s better, hydrogear or Parker’s?

@ranytravis4953 Жыл бұрын

Do you have a video on non hydro gears ??

@mdduran5824 Ай бұрын

I got a question for you We're available to find a idraulick pomp for gravery 27hp Daihatsu diesel Liquid cooled mower

@kennysparks5446 Жыл бұрын

Good video. How can I tell if it’s my hydro pump on my 2008 zero turn mower. The left stick only pushes the mower about half of the right side

@youtubestar Жыл бұрын

I would also check the adjustment on the control arm that is attached to the hydrop pump. They are adjustable. Also at the end of that control alarm there's a set pin that holds the Lever on the shaft of the hydro pump sometimes That can come loose And the lever might not be grabbing the shaft properly to give you the full distance throw of the handle.

@ricky3686 4 ай бұрын

what could be the reason why my hydros starts losing wheel power after an hour or so after getting hot I assume?

@edwinhunter7934 Жыл бұрын

I need a new shaft can you help. The fan I caused to brake then I tried to remove the nut holding the fan to the shaft, I didn’t see until I looked at the broken nut that it was stamped on both sides to prevent it from loosening. Your suggestions please, and thank you. My name is Ed.

@KennyTrussell Жыл бұрын

Excellent video. Very clear! My Bad Boy with this type pump acts as though there is backlash. There is no backlash in my linkage at all, but to stop the wheel, the pump lever has to return to a different place when coming from forward versus coming from reverse. It creeps one way or the other in what should be the neutral position. Is that normal for these type pumps? I may disassemble to see if I can find an issue. (Thanks to your video!)

@youtubestar Жыл бұрын

Are you certain that the lever has not shifted on the shaft itself?

@youtubestar Жыл бұрын

One thing you can do is take the Linkage arm itself off. Then Jack up your machine be very careful doing this. Try to move the lever yourself forward and reverse. You might find out that you are actually able to push the lever farther than when the linkage was connected. If that is the case then you definitely have to adjust the linkage Or the lever on the shaft itself. If you remember in my video there's a cradle at the bottom of the pump sounds to me like the cradle is not being depressed completely when going in. Therefore it's not going to build the proper pressure.

@youtubestar Жыл бұрын

You can also do this method by adjusting the handle itself so that you're able to pull the handle farther backwards. Depending on your machine these handles will stop at a certain spot but if you loosen the bolts on the handle and push it forward a little more and then tighten it you'll be able to pull back farther if that makes any sense. If you're still not having any luck after that I would suggest doing a complete tear down and see what's going on inside

@KennyTrussell Жыл бұрын

@@youtubestar I guess you mean I'll be able to pull it back farther before the arms drop into the neutral slots. I didn't fully explain, but I have automated my mower and completely removed the arms. I have servos moving the pump levers. I have videos on my channel of my mower adventures. My original mower, which has a nice deadband at neutral, had the combo transaxles, but the latest one has the separate pump and motor. I'll pop the top on the pumps and see what I can see. Thank you for responding!

@KennyTrussell Жыл бұрын

The first step I take in operating the mower after installing the automation is to put it on jackstands and adjust linkages and parameters in the firmware so that neutral on my controls is dead center of the deadband of the mower drive system. What I found with this mower is that I could not find such a spot. The mower only has 400 hours on it, but is a 2014 model. Thank you for your detailed attempt at helping.

@MrGus.1 7 ай бұрын

It appears 90% of the disassembly can take place while the pump is still installed in the mower..... Is there a reason the pump has to be removed? (Wright Sentar)

@1random_person Жыл бұрын

Like and subbed. Great information. My toro grandstand loses function on right ride after mowing for about 30 minutes. Works fine again after waiting an hour but eventually loses it again. Hopefully following this video will show me something. Maybe someone has experienced it before and can help. Thanks

@youtubestar Жыл бұрын

A couple things you can check. Number one check to see if all the fan blades are on that pump on the right side. If they are missing blades when the pump gets hot it can lose pressure And then when it cools down it will run good again.. Also you might have bad seals in your pump. The seals are rubber and when they get hot they expand and if you have bad seals the pump will not build as much pressure when they warm up.

@siuflsr Жыл бұрын

My right side blades are nicked up. How do you replace them?

@1random_person Жыл бұрын

@@youtubestar No fans on these pumps I'm pretty sure, older model. Just frothing in reservoir is the only thing i noticed and sometimes a leak forms at wheel motor hose connection. Was guessing pressure/heat issue since it works fine after cooling down. Maybe bad oil. Will break down the pump and this week check seals. Thanks for the quick response!

@siuflsr Жыл бұрын

I’m assuming it’s just the same technique as the left side and replacing the fan.

@siuflsr Жыл бұрын

PS super clear explanation of the rebuild and the workings of this motor. Demystified wonderfully

@GwinnettLawns 9 ай бұрын

No do the same kind of video on the Honda HRX 217 transmission.